Nitrite reduction using a membrane biofilm reactor (MBfR) in a hypoxic environment with dilute methane under low pressures

Methane-based membrane biofilm reactors (MBfRs) can be an effective solution for nitrogen control in wastewater, but there is limited information on nitrite reduction for dilute wastewater (e.g., municipal wastewater) in hypoxic MBfRs. This study assessed the impacts of dilute (20 %), low-pressure methane (0.35-2.41 kPa) applied to MBfRs at hydraulic retention times (HRTs) of 2-12 h on nitrite removals, dissolved methane concentrations, and the resulting changes in the microbial community. High nitrite flux along with rapid and virtually complete (> 99 %) nitrite removals were observed at methane pressures of 1.03-2.41 kPa at HRTs above 4 h, despite the use of diluted methane gas for the MBfR. The lowest methane pressure (0.35 kPa) was also able to achieve up to 98 % nitrite removals but required HRTs of up to 12 h. All scenarios had low dissolved methane concentrations (< 10 mg/L), indicating that dilute methane at low supply pressures can effectively remove nitrite while meeting dissolved methane guidelines in treated effluent. Methylococcus genus was the key bacterium in MBfR biofilm grown at different HRTs and methane pressures, along with Methylocystis and other heterotrophic denitrifiers (Terrimonas and Hyphomicrobium). This study indicates that methane-based denitrification MBfRs can be a valuable tool to meet nitrogen limits for dilute wastewater coupled to partial nitrification, while limiting the release of methane to the environment.

Automated summary

This study assessed the effectiveness of methane-based membrane biofilm reactors (MBfRs) for nitrite removal in dilute wastewater. The results showed that high nitrite removals can be achieved at certain methane pressures and hydraulic retention times, with low dissolved methane concentrations in treated effluent.