4.5 Article

Statistical optimization modeling of organic dye photodegradation process using slag nanocomposite

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Polymer Science

Monothetic Analysis and Response Surface Methodology Optimization of Calcium Alginate Microcapsules Characteristics

Joshua Anani et al.

Summary: Due to their low cost, environmental friendliness and mechanical stability, calcium alginate microcapsules have gained significant interest for various applications. Among the different production methods, the Electrospraying technique has shown great potential in producing smaller and controllable capsules. However, the traditional one factor at a time (OFAT) method is inefficient in explaining the complex parameter interactions in the electrospray process. In this study, the main parameters affecting the size and sphericity of the microcapsules were optimized using OFAT and a statistical model employing the Surface Responses Methodology (RSM) and Central Composite Design (CDD) was proposed. By applying high voltage, the optimization processes successfully produced spherical microcapsules with a diameter below 100 μm.

POLYMERS (2022)

Article Engineering, Environmental

Novel nano-ferromagnetic activated graphene adsorbent extracted from waste for dye decolonization

Kenneth Mensah et al.

Summary: Polyethylene terephthalate waste was successfully transformed into graphene through pyrolysis, and further modified into activated or ferromagnetic graphene. These modified graphene materials exhibited excellent adsorption capacity for methylene blue dye removal, with potential applications in water treatment.

JOURNAL OF WATER PROCESS ENGINEERING (2022)

Article Environmental Sciences

Utilization of iron waste from steel industries in persulfate activation for effective degradation of dye solutions

Kenneth Mensah et al.

Summary: The performance of three solid iron wastes as an activator for the degradation of methylene blue was evaluated, and one of them showed the best performance. The morphology, chemical composition, and chemical structure of the iron wastes were studied. The results showed that complete degradation of methylene blue could be achieved under certain conditions. The study also found that the iron waste could be efficiently employed in both the suspended and immobilized modes.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Article Engineering, Multidisciplinary

Modeling of Hepatitis B Virus Transmission with Fractional Analysis

Muhammad Khan et al.

Summary: This paper analyzes the time dynamics of Hepatitis B under the influence of various infectious periods, proposing a model that takes into account the roles of acute and chronic infection stages. The study uses fractional theory and qualitative analysis to develop the model, demonstrating the existence and uniqueness of solutions and the stability of the proposed fractional model. The findings are supported by graphical visualization.

MATHEMATICAL PROBLEMS IN ENGINEERING (2022)

Article Chemistry, Multidisciplinary

Fabrication of a zinc oxide/alginate (ZnO/Alg) bionanocomposite for enhanced dye degradation and its optimization study

Vasi Uddin Siddiqui et al.

Summary: This paper introduces a new response surface methodology (RSM) based on central composite design (CCD) modeling method for optimizing the photocatalytic degradation of methylene blue (MB) and methyl orange (MO) using synthesized ZnO/Alg bionanocomposite under UV irradiation. The study involves the synthesis of ZnO with different sodium alginate (Alg) content and the characterization of the catalysts using various techniques. The optimal conditions for MB and MO degradation were determined using CCD-RSM, and the achieved degradation efficiency was 98%.

RSC ADVANCES (2022)

Article Chemistry, Inorganic & Nuclear

Response Surface Methodology for Photo Degradation of Methyl Orange Using Magnetic Nanocomposites Containing Zinc Oxide

Sedigheh Abbasi

Summary: Fe3O4-GO-ZnO nanocomposite was prepared as a photocatalyst for the removal of methyl orange. The study showed that irradiation time and pH significantly influenced the removal efficiency, with graphene oxide playing a crucial role in enhancing photocatalytic activity.

JOURNAL OF CLUSTER SCIENCE (2021)

Article Chemistry, Multidisciplinary

Au clusters-based visible light photocatalysis

Chang-Long Tan et al.

Summary: Gold clusters have attracted significant attention in the field of photocatalysis, serving as unique visible photosensitizers and catalytic centers for driving various photoredox reactions. This article provides an overview of the applications of gold clusters-based composites in heterogeneous photocatalysis, along with discussing strategies for improving the photostability of gold clusters and outlining future opportunities in gold clusters-based photocatalysis.

RESEARCH ON CHEMICAL INTERMEDIATES (2021)

Article Engineering, Chemical

Degradation of basic violet 16 dye by electro-activated persulfate process from aqueous solutions and toxicity assessment using microorganisms: determination of by-products, reaction kinetic and optimization using Box-Behnken design

Kamal Hasani et al.

Summary: This study investigated the efficiency of the electro/persulfate process in removing BV16 dye and COD, identifying optimal conditions for removal. Results showed high efficiency in removal under optimal conditions, but with increased energy consumption as voltage increased. The study also explored the impact of electrode distance and surface area on removal efficiency through kinetic modeling.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Bismuth sulfide photocatalysis water treatment under visible irradiation

Atiya Khalid et al.

Summary: Bismuth sulfide (Bi2S3) nanorods synthesized via solid-state reaction exhibited efficient photocatalytic performance in the removal of Congo red dye from water, with high photodegradation efficiencies and specific surface area. The photocatalytic process followed a pseudo-first-order kinetic model, with an apparent rate constant of 0.01573/min for the Bi2S3 nanorods catalyst.

RESEARCH ON CHEMICAL INTERMEDIATES (2021)

Review Chemistry, Multidisciplinary

A Review of Modified Steel Slag Application in Catalytic Pyrolysis, Organic Degradation, Electrocatalysis, Photocatalysis, Transesterification and Carbon Capture and Storage

Fu-Ping Wang et al.

Summary: Steel slag, as a by-product of the iron and steel industry, is rich in catalytically active substances and shows huge application potential as a solid catalyst. Research progress and modification methods have further improved the catalytic performance of steel slag, making it more efficient, clean, and cost-effective.

APPLIED SCIENCES-BASEL (2021)

Article Engineering, Environmental

Preparation and characterization of magnetic photocatalyst from the banded iron formation for effective photodegradation of methylene blue under UV and visible illumination

Moustafa M. S. Sanad et al.

Summary: This study focused on the production of an efficient and low-cost magnetic photocatalyst from banded iron formation (BIF) through a single-stage heat-treatment process. The Ar-modified BIF samples exhibited excellent photocatalytic performance, with a maximum efficiency of 87.5% under UV light and 76.9% under visible light.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Modeling and Box-Behnken design optimization of photocatalytic parameters for efficient removal of dye by lanthanum-doped mesoporous TiO2

Hanane Chaker et al.

Summary: In this study, the Box-Behnken design in the response surface methodology was used to investigate the modelization and optimization of Methyl Orange mineralization parameters with La doped mesoporous TiO2. The effects of irradiation light wavelength, catalyst weight, and MO concentration on the yield of MO mineralization were studied. The optimized conditions were determined to be 310 nm light wavelength, 80 mg catalyst weight, and 20 ppm MO concentration, achieving a mineralization rate of 99.89%.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Optimization of the transfer hydrogenation reaction of acetophenone on Ni@MOF-5 nanoparticles using response surface methodology

Azadeh Nemati Chelavi et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2020)

Review Green & Sustainable Science & Technology

Recent advancements in visible-light-assisted photocatalytic removal of aqueous pharmaceutical pollutants

Ankush Majumdar et al.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2020)

Article Engineering, Chemical

Effective photocatalytic degradation of sulfamethazine by CNTs/LaVO4 in suspension and dip coating modes

Mahmoud Samy et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Article Chemistry, Multidisciplinary

Preparation of Fe3O4@SiO2@ P(AANa-co-AM) Composites and Their Adsorption for Pb(II)

Han Liu et al.

ACS OMEGA (2020)

Article Chemistry, Analytical

Photo-Fenton degradation of methylene blue using hematite-enriched slag under visible light

Ahmed S. Ali et al.

JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY (2020)

Article Engineering, Environmental

Synthesis of MIL-53(Fe)/SiO2 composite from LD slag as a novel photo-catalyst for methylene blue degradation

Chayan Sarkar et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Materials Science, Biomaterials

The photodegradation of methylene blue in water with PVDF/GO/ZnO composite membrane

Dongdong Zhang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Article Chemistry, Multidisciplinary

g-C3N4 quantum dots-modified mesoporous TiO2-SiO2 for enhanced photocatalysis

Jie Yu et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2019)

Review Green & Sustainable Science & Technology

Photocatalysis and biodegradation of pharmaceuticals in wastewater: effect of abiotic and biotic factors

Samson O. Akpotu et al.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2019)

Article Engineering, Environmental

Modeling and optimization of heterogeneous Fenton-like and photo-Fenton processes using reusable Fe3O4-MWCNTs

Aya Tolba et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Materials Science, Ceramics

Influence of steel slag on the mechanical properties and curing time of metakaolin geopolymer

Tao Bai et al.

CERAMICS INTERNATIONAL (2018)

Article Chemistry, Physical

A p-n junction NiO-CdS nanoparticles with enhanced photocatalytic activity: A response surface methodology study

Samaneh Senobari et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Article Nanoscience & Nanotechnology

Photocatalytic degradation of organic dyes using composite nanofibers under UV irradiation

Ahmed Salama et al.

APPLIED NANOSCIENCE (2018)

Article Environmental Sciences

Study of decolorisation of binary dye mixture by response surface methodology

Shraddha Khamparia et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2017)

Proceedings Paper Engineering, Chemical

Removal of Methylene Blue Dye from Aqueous Solution Using a Newly Synthesized TiO2-SiO2 Photocatalyst in the Presence of Active Chlorine Species

C. G. Joseph et al.

29TH SYMPOSIUM OF MALAYSIAN CHEMICAL ENGINEERS (SOMCHE) 2016 (2017)

Review Water Resources

Parameters affecting the photocatalytic degradation of dyes using TiO2: a review

Khan Mamun Reza et al.

APPLIED WATER SCIENCE (2017)

Article Engineering, Electrical & Electronic

Alkali-Activated Steel Slag-Based Mesoporous Material as a New Photocatalyst for Degradation of Dye from Wastewater

Le Kang et al.

INTEGRATED FERROELECTRICS (2015)

Article Environmental Sciences

Performance evaluation of a continuous flow photocatalytic reactor for wastewater treatment

Mohammad Rezaei et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2014)

Article Chemistry, Multidisciplinary

Preparation of catalytic particle electrodes from steel slag and its performance in a three-dimensional electrochemical oxidation system

Zhaoyang Wang et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)

Article Spectroscopy

Study of catalytic reduction and photodegradation of methylene blue by heterogeneous catalyst

Sh Sohrabnezhad

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2011)

Article Construction & Building Technology

Chemical, Mineralogical, and Morphological Properties of Steel Slag

Irem Zeynep Yildirim et al.

ADVANCES IN CIVIL ENGINEERING (2011)

Article Engineering, Environmental

Physico-Chemical Characterization of Steel Slag. Study of its Behavior under Simulated Environmental Conditions

Carla Navarro et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2010)

Article Chemistry, Inorganic & Nuclear

Photo-degradation of methylene blue using Ta-doped ZnO nanoparticle

Ji-Zhou Kong et al.

JOURNAL OF SOLID STATE CHEMISTRY (2010)

Article Materials Science, Multidisciplinary

Chemical and mineralogical characterizations of LD converter steel slags: A multi-analytical techniques approach

J. Waligora et al.

MATERIALS CHARACTERIZATION (2010)

Article Chemistry, Applied

Synthetic CeO2 Nanoparticle Catalysis of Methylene Blue Photodegradation: Kinetics and Mechanism

H. R. Pouretedal et al.

CHINESE JOURNAL OF CATALYSIS (2010)

Article Engineering, Environmental

Utilization of steel slag for Portland cement clinker production

P. E. Tsakiridis et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Article Engineering, Environmental

Optimization of process parameters for acrylonitrile removal by a low-cost adsorbent using Box-Behnken design

Arvind Kumar et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Article Engineering, Environmental

An overview of utilization of slag and sludge from steel industries

B. Das et al.

RESOURCES CONSERVATION AND RECYCLING (2007)

Article Environmental Sciences

Biological decolourisation of simulated azo dye in aqueous phase by algae Spirogyra species

SV Mohan et al.

INTERNATIONAL JOURNAL OF ENVIRONMENT AND POLLUTION (2004)

Article Engineering, Environmental

Physical and chemical characteristics of blast furnace, basic oxygen furnace, and electric arc furnace steel industry slags

DM Proctor et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2000)