☆ 4.7 Article

Novel UV-curable epoxy resins modified with alkyne: Cured through thiol-yne click reaction

PROGRESS IN ORGANIC COATINGS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Acrylamide-modified polyvinyl alcohol and combined with graphene oxide for low dielectric constant composite films

Pan Tian et al.

Summary: In this study, a novel structure optimization approach was proposed to develop a composite film with high transparency and low dielectric loss by designing a reaction between PVA and acrylamide. The introduction of acrylamide increased the strength of the film and the low dipole groups reduced its dielectric constant. Moreover, the addition of graphene oxide further enhanced the strength of the film. The obtained composite film showed superior tensile strength, dielectric constant, and dielectric loss compared to pure PVA and PVA/GO composite films reported in previous literature. It has great potential in the field of dielectric materials for high-frequency communication.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Polymer Science

Epoxy/benzoxazinylPOSSnanocomposite resin with low dielectric constant and excellent thermal stability

Xiaodan Li et al.

Summary: BZPOSS is successfully synthesized and used to prepare nanocomposites with E51, showing high catalytic activity and reducing dielectric constant. The thermal stability and heat resistance of poly(E51/BZPOSS)s at high temperature increased with the increase of BZPOSS, due to the increase of crosslinking density and change of crosslinking structure.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Polymer Science

Fast Hydrolytically Degradable 3D Printed Object Based on Aliphatic Polycarbonate Thiol-Yne Photoresins

Yimei Wu et al.

Summary: This study introduces a new thiol-yne photoresin formulation that enables fast hydrolytic degradation of 3D printed objects, applied successfully in high-resolution 3D printing. By incorporating aliphatic polycarbonate alkyne components and ester thiols, the ability to rapidly hydrolyze 3D printed objects is enhanced.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2021)

添加到收藏夹

Article Polymer Science

Analysis of Acrylic and Methacrylic Networks through Pyrolysis-GC/MS

Zakaria Belbakra et al.

Summary: A direct analytical method using multi-step pyrolysis-GC/MS was developed to characterize UV-cured networks, with a focus on (meth)acrylate-based systems. The technique revealed a clear reversion process of methacrylates during pyrolysis, while the decomposition of acrylates in high molecular weight degradation products was not easily detected. The potential impact of this method on elucidating the structural and compositional nature of UV-cured polymeric networks was emphasized.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Physical

Improved dielectric and thermal properties of core-shell structured SiO2/polyolefin polymer composites for high-frequency copper clad laminates

Bo Wu et al.

Summary: Core-shell structured SiO2 particles with different shell thicknesses were prepared by coating EPDM onto their surface, showing high thermal conductivity, low dielectric loss, and low dielectric constant in copper clad laminates for potential use in high-frequency printed circuit boards.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Progress on Polymer Composites With Low Dielectric Constant and Low Dielectric Loss for High-Frequency Signal Transmission

Lu Wang et al.

Summary: This review introduces the challenges in high-frequency signal transmission, the development direction of dielectric materials, and how to optimize and adjust the dielectric properties through molecular structure design and fillers.

FRONTIERS IN MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Exceptional Mechanical Properties and Heat Resistance of Photocurable Bismaleimide Ink for 3D Printing

Wenqiang Hua et al.

Summary: A photocurable bismaleimide ink with excellent comprehensive performance for stereolithography (SLA) 3D printing was developed in this study, showing improved mechanical properties and heat resistance compared to commercial inks.

MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Synthesis of tetraallylated cystamine and the study of its performance as a curing agent for the epoxy/thiol-ene photopolymerization of biobased nopol epoxy resins

Ricardo Acosta Ortiz et al.

Summary: This study reports the synthesis of a bio-inspired curing agent TAC and evaluates its performance in two epoxy resins using the epoxy/thiol-ene photopolymerization technique. The results show that TAC can achieve cross-linked co-networks of the polyether-polythioether type, with one epoxy resin displaying higher reactivity, modulus, and thermal stability.

JOURNAL OF POLYMER RESEARCH (2021)

添加到收藏夹

Article Engineering, Chemical

Functionalization of Poly(oxindole biphenylylene) membranes by photoinduced thiol-yne click chemistry

Mustafa Arslan et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Toughness modification of cationic UV-cured cycloaliphatic epoxy resin by hydroxyl polymers with different structures

Yuzheng Xia et al.

EUROPEAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Low dielectric constant and high toughness epoxy resin based on hyperbranched polyester grafted by flexible chain modified

Zilong Wang et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

添加到收藏夹

Review Chemistry, Physical

Hydrostannation of Alkynes

Mouad Alami et al.

ACS CATALYSIS (2019)

添加到收藏夹

Article Polymer Science

Self-Toughening and Self-Enhancement Poly(arylene ether nitrile) with Low Dielectric Constant by Solid Crosslinking Reaction

Lifen Tong et al.

POLYMERS (2019)

添加到收藏夹

Article Engineering, Environmental

Latent curing epoxy system with excellent thermal stability, flame retardance and dielectric property

Ying-Jun Xu et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabrication of Photoluminescent Quantum Dot Thiol-yne Nanocomposites via Thermal Curing or Photopolymerization

Michael H. Stewart et al.

ACS OMEGA (2018)

添加到收藏夹

Article Polymer Science

Development of rigid toughened photocurable epoxy foams

Ricardo Acosta Ortiz et al.

JOURNAL OF POLYMER RESEARCH (2017)

添加到收藏夹

Article Polymer Science

Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

Andreas Oesterreicher et al.

POLYMER CHEMISTRY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thiol-yne/thiol-epoxy hybrid crosslinked materials based on propargyl modified hyperbranched poly(ethyleneimine) and diglycidylether of bisphenol A resins

Cristina Acebo et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Polymer Science

Tough epoxy/cyanate ester resins with improved thermal stability, lower dielectric constant and loss based on unique hyperbranched polysiloxane liquid crystalline

Zhen Liu et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Light-Induced Click Reactions

Mehmet Atilla Tasdelen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

添加到收藏夹

Editorial Material Chemistry, Multidisciplinary

Thiol-Yne Chemistry: A Powerful Tool for Creating Highly Functional Materials

Richard Hoogenboom

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)

添加到收藏夹

Review Chemistry, Multidisciplinary

Thiol-Ene Click Chemistry

Charles E. Hoyle et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)

添加到收藏夹

Review Chemistry, Multidisciplinary

Thiol-click chemistry: a multifaceted toolbox for small molecule and polymer synthesis

Charles E. Hoyle et al.

CHEMICAL SOCIETY REVIEWS (2010)

添加到收藏夹

Article Polymer Science

Reaction Rates and Mechanisms for Radical, Photoinitated Addition of Thiols to Alkynes, and Implications for Thiol-Yne Photopolymerizations and Click Reactions

Benjamin D. Fairbanks et al.

MACROMOLECULES (2010)

添加到收藏夹

Article Polymer Science

Dielectric analysis of poly(methyl methacrylate) zinc(II) mono-pinacolborane diphenylporphyrin composites

Brent Hilker et al.

POLYMER (2010)

添加到收藏夹

Article Polymer Science

Properties and toughening of heat-resistant thermosets based on unsaturated ester resins

DA Canelas et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.