☆ 4.4 Article

Influence of tooth root cracks on the mesh stiffness of asymmetric spur gear pair with different backup ratios

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Influence of drive side pressure angle on fracture characteristics of asymmetric spur gear

Nandu Namboothiri et al.

Summary: This paper investigates the fracture characteristics of asymmetric spur gears under mixed mode fracture and examines the combined effect of pressure angle and other gear parameters. The study provides valuable input for designing asymmetric spur gears and selecting gear parameters.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Mechanical

A numerical investigation on the hybrid spur gears: Stress and dynamic analysis

Tufan G. Yilmaz et al.

Summary: This study numerically examines the effect of rim thickness of hybrid gears on various factors such as root stress, joint stress, tooth stiffness, natural frequency, and dynamic behavior. It is found that hybrid gears have the potential to reduce the mass of gear transmission systems without negatively impacting root stress and dynamic factors if appropriate design parameters are selected. Rim thickness is identified as a critical parameter for hybrid gears.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Research on the meshing characteristics of asymmetric gears considering the tooth profile deviation

Shuai Mo et al.

Summary: This paper proposes a time-varying meshing stiffness (TVMS) analytical model for asymmetric gear pairs based on the potential energy principle. The model considers the influence of adjacent teeth on the gear teeth deformation and is validated through finite element analysis. The study finds that tooth tip relief and tooth profile error have significant effects on the characteristics of asymmetric gear pairs, and even slight profile errors can cause noticeable fluctuations in gear meshing characteristics.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

A mesh stiffness method using slice coupling for spur gear pairs with misalignment and lead crown relief

Qibin Wang et al.

Summary: A mesh stiffness model for spur gear pairs with misalignment and lead crown relief is proposed, with slice coupling effect presented and validated for its accuracy and effectiveness. Consideration of slice coupling is recommended in mesh stiffness calculation for gear pairs with misalignment and lead crown relief.

APPLIED MATHEMATICAL MODELLING (2021)

添加到收藏夹

Article Mechanics

Investigation of the effect of pressure angle on gear performance in asymmetric gears

Ali Kecici et al.

Summary: The study found that by designing asymmetric gear mechanisms with different pressure angles and profile crowning, it is possible to improve the load bearing capacity, performance, life, efficiency, and reliability of gears. Compared to symmetric gears, asymmetric gear design and profile crowning can effectively improve the working performance of gears.

MECCANICA (2021)

添加到收藏夹

Article Engineering, Mechanical

Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation life

Oguz Dogan et al.

Summary: Gears play a crucial role in power transmission systems, but are susceptible to high loads and impact forces, leading to surface cracks. By studying different rim thicknesses and pressure angles, the effects on fatigue crack propagation life and root stress were explored, resulting in a significant decrease in maximum stress values and a substantial increase in fatigue propagation life.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Mechanical

Investigation of fracture behaviour of asymmetric spur gear

Nandu Namboothiri et al.

Summary: The majority of literature study on fracture analysis is carried out for symmetric gears and mostly in two-dimensional analysis. In this study, parametric analysis was conducted for asymmetric spur gears to explore fracture behavior, with the analysis inferring that the effect of opening mode fracture is predominant on the effective stress intensity factor.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Acoustics

Vibration characteristic analysis of spur gear systems under tooth crack or fracture

Xu Li et al.

Summary: Tooth fractures and cracks in gear transmission systems were studied using fracture mechanics theory, with crack propagation paths obtained for spur gears. A flexible body model for the cracked gear system was established in ADAMS, with vibration signals under different torques validated by experimental results. Statistical indicators and instantaneous energy were used to quantify damage and analyze fault features in the gear system.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2021)

添加到收藏夹

Article Mechanics

Mesh stiffness modelling and dynamic simulation of helical gears with tooth crack propagation

Hanjun Jiang et al.

MECCANICA (2020)

添加到收藏夹

Article Engineering, Mechanical

Vibration response and fault characteristics analysis of gear based on time-varying mesh stiffness

Zong Meng et al.

MECHANISM AND MACHINE THEORY (2020)

添加到收藏夹

Article Engineering, Mechanical

Design principle and modeling method of asymmetric involute internal helical gears

Mo Shuai et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Nonlinear dynamic response of a spur gear pair based on the modeling of periodic mesh stiffness and static transmission error

Yi Yang et al.

APPLIED MATHEMATICAL MODELLING (2019)

添加到收藏夹

Article Engineering, Mechanical

Crack detection for spur gears with asymmetric teeth based on the dynamic transmission error

Oguz Dogan et al.

MECHANISM AND MACHINE THEORY (2019)

添加到收藏夹

Article Engineering, Mechanical

Comparison of meshing characteristics of helical gears with spalling fault using analytical and finite-element methods

Kangkang Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

A novel distribution model of multiple teeth pits for evaluating time-varying mesh stiffness of external spur gears

Taoyuan Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

A comparative numerical study of forged bi-metal gears: Bending strength and dynamic response

Tufan G. Yilmaz et al.

MECHANISM AND MACHINE THEORY (2019)

添加到收藏夹

Article Engineering, Mechanical

An analysis of the tooth stress distribution of forged bi-metallic gears

Denis J. Politis et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2018)

添加到收藏夹

Article Acoustics

Model-Based Analysis of Spur Gears' Dynamic Behavior in the Presence of Multiple Cracks

Ahmed Saeed Mohamed et al.

SHOCK AND VIBRATION (2018)

添加到收藏夹

Article Engineering, Mechanical

An analytical-finite-element method for calculating mesh stiffness of spur gear pairs with complicated foundation and crack

Qibin Wang et al.

ENGINEERING FAILURE ANALYSIS (2018)

添加到收藏夹

Article Engineering, Mechanical

Crack growth modeling in spur gear tooth and its effect on mesh stiffness using extended finite element method

Jay Govind Verma et al.

ENGINEERING FAILURE ANALYSIS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental measurement of spur gear mesh stiffness using digital image correlation technique

Naresh K. Raghuwanshi et al.

MEASUREMENT (2017)

添加到收藏夹

Article Engineering, Mechanical

Effect of mesh stiffness of healthy and cracked gear tooth on modal and frequency response characteristics of geared rotor system

Ankur Saxena et al.

MECHANISM AND MACHINE THEORY (2017)

添加到收藏夹

Article Thermodynamics

An improved numerical method for the mesh stiffness calculation of spur gears with asymmetric teeth on dynamic load analysis

Fatih Karpat et al.

ADVANCES IN MECHANICAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental measurement of gear mesh stiffness of cracked spur gear by strain gauge technique

Naresh K. Raghuwanshi et al.

MEASUREMENT (2016)

添加到收藏夹

Article Engineering, Mechanical

Dynamic response and time-frequency analysis for gear tooth crack detection

Omar D. Mohammed et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

添加到收藏夹

Article Engineering, Mechanical

The effects of spur gear tooth spatial crack propagation on gear mesh stiffness

Wennian Yu et al.

ENGINEERING FAILURE ANALYSIS (2015)

添加到收藏夹

Article Engineering, Mechanical

Time-varying mesh stiffness calculation of cracked spur gears

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2014)

添加到收藏夹

Article Engineering, Mechanical

Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set

Xihui Liang et al.

MECHANISM AND MACHINE THEORY (2014)

添加到收藏夹

Article Engineering, Mechanical

Evaluating the time-varying mesh stiffness of a planetary gear set using the potential energy method

Xihui Liang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2014)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation of spur gear tooth mesh stiffness in the presence of crack using photoelasticity technique

Yogesh Pandya et al.

ENGINEERING FAILURE ANALYSIS (2013)

添加到收藏夹

Article Engineering, Mechanical

Failure path based modified gear mesh stiffness for spur gear pair with tooth root crack

Yogesh Pandya et al.

ENGINEERING FAILURE ANALYSIS (2013)

添加到收藏夹

Article Engineering, Mechanical

Simulation of crack propagation in spur gear tooth for different gear parameter and its influence on mesh stiffness

Yogesh Pandya et al.

ENGINEERING FAILURE ANALYSIS (2013)

添加到收藏夹

Article Engineering, Mechanical

Vibration signal analysis for gear fault diagnosis with various crack progression scenarios

Omar D. Mohammed et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

添加到收藏夹

Article Engineering, Mechanical

A model for the study of meshing stiffness in spur gear transmissions

A. Fernandez del Rincon et al.

MECHANISM AND MACHINE THEORY (2013)

添加到收藏夹

Article Engineering, Mechanical

Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack

Zaigang Chen et al.

MECHANISM AND MACHINE THEORY (2013)

添加到收藏夹

Article Engineering, Mechanical

Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth

Zaigang Chen et al.

ENGINEERING FAILURE ANALYSIS (2011)

添加到收藏夹

Article Engineering, Mechanical

Improving bending stress in spur gears using asymmetric gears and shape optimization

Niels L. Pedersen

MECHANISM AND MACHINE THEORY (2010)

添加到收藏夹

Article Mechanics

Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness

Fakher Chaari et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)

添加到收藏夹

Article Mechanics

Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission

Fakher Chaari et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)

添加到收藏夹

Article Engineering, Mechanical

Dynamic analysis of involute spur gears with asymmetric teeth

Fatih Karpat et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2008)

添加到收藏夹

Article Engineering, Mechanical

Probabilistic analysis of MEMS asymmetric gear tooth

Fatih Karpat et al.

JOURNAL OF MECHANICAL DESIGN (2008)

添加到收藏夹

Article Engineering, Mechanical

Influence of Tip Relief Modification on the Wear of Spur Gears with Asymmetric Teeth

Fatih Karpat et al.

TRIBOLOGY TRANSACTIONS (2008)

添加到收藏夹

Article Engineering, Mechanical

Computer aided analysis of bending strength of involute spur gears with asymmetric profile

K Cavdar et al.

JOURNAL OF MECHANICAL DESIGN (2005)

添加到收藏夹

Article Engineering, Mechanical

The dynamic modelling of a spur gear in mesh including friction and a crack

I Howard et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2001)

添加到收藏夹

Article Acoustics

The effect of tooth wear on the vibration spectrum of a spur gear pair

JH Kuang et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2001)

添加到收藏夹

Article Engineering, Mechanical

Geometry and design of involute spur gears with asymmetric teeth

A Kapelevich

MECHANISM AND MACHINE THEORY (2000)

添加到收藏夹

Article Engineering, Multidisciplinary

Asymmetric modified spur gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis

FL Litvin et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.