☆ 4.7 Article

Effects of stitching yarn types on flexural fatigue properties of 3D stitched carbon fiber composites

POLYMER TESTING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Engineering, Manufacturing

A review on three-dimensional stitched composites and their research perspectives

Chenyang Song et al.

Summary: Three-dimensional (3D) stitching technology is an effective method to improve the interlaminar performance of composites, but there is still insufficient information on stitch methods, equipment, and failure mechanisms. This review systematically introduces stitched composites from the aspects of stitching methods, machines, parameters, and mechanical performance.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Materials Science, Composites

The translaminar fracture toughness of high-performance polymer fibre composites and their carbon fibre hybrids

Yoran Geboes et al.

Summary: Translaminar fracture toughness is a key property that determines the damage tolerance and notch sensitivity of fibre-reinforced composites. This study found that using PAR and PBO fibers can significantly improve the translaminar fracture toughness of composite materials, while the performance of aramid fiber is lackluster in comparison.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Flexural fatigue properties and failure propagation of 3D stitched composites under 3-point bending loading

Wen Song et al.

Summary: The static flexural strength of 3D stitched composite was lower than 2D laminated composite, but the modulus was higher. The fatigue failure mechanism of 3D stitching composite was dependent on stress levels.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Materials Science, Composites

Enhancing the fracture toughness of laminated composites through carbon nanotube belt stitching

Huigai Li et al.

Summary: In this study, unidirectional carbon fiber reinforced plastics laminates were stitched using ultra-thin continuous carbon nanotube (CNT) belts in order to enhance their interlaminar properties, specifically interlaminar fracture toughness. The results showed significant improvements in mode I and mode II interlaminar fracture toughness after CNT belt stitching, attributed to bridge-connections between CNTs and the CNT-resin interface. Additionally, the tensile and bending performance of the laminated composites showed negligible variation after CNT belt stitching.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Review Materials Science, Composites

Influence of stitching on the out-of-plane behavior of composite materials - A mechanistic review

Daniel A. Drake et al.

Summary: Fiber-reinforced polymer composites are widely used in the aerospace industry for their high stiffness and strength-to-weight ratios. However, their interlaminar properties may limit their applicability, leading to the development of through-thickness reinforcement approaches like stitching. Stitching is considered a cost-effective method that significantly impacts the properties of composite materials.

JOURNAL OF COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Fully-reversed tension-compression fatigue of 2D and 3D woven polymer matrix composites at elevated temperature

M. B. Ruggles-Wrenn et al.

Summary: The high-temperature tension-compression fatigue behavior of polymer matrix composites with 2D and 3D fiber architectures was examined in this study. The 3D composite showed a higher fatigue limit while the 2D laminated composite displayed slightly better fatigue performance at higher stress levels. Examination of tested specimens revealed extensive delamination in the 2D composite, while the 3D composite showed enhanced delamination resistance.

POLYMER TESTING (2021)

添加到收藏夹

Article Chemistry, Physical

A Comprehensive Study on the Mechanical Properties of Different 3D Woven Carbon Fiber-Epoxy Composites

Qiaole Hu et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Experimental study on compressive fatigue behavior and failure mechanism of 3D five-directional braided composites

Hong-mei Zuo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Fatigue Behavior of Composite Sandwich Panels Under Three Point Bending Load

Mingze Ma et al.

POLYMER TESTING (2020)

添加到收藏夹

Review Materials Science, Textiles

Through-the-thickness reinforcement for composite structures: A review

I. Gnaba et al.

JOURNAL OF INDUSTRIAL TEXTILES (2019)

添加到收藏夹

Article Mechanics

Fabrication, properties and failure of 3D stitched carbon/epoxy composites with no stitching fibers damage

Jia-qian Xuan et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

The fatigue of carbon fibre reinforced plastics - A review

Parvez Alam et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

The Failure Mechanism of Composite Stiffener Components Reinforced with 3D Woven Fabrics

Qiaole Hu et al.

MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fatigue behavior of the 3D orthogonal carbon/glass fibers hybrid composite under three-point bending

Wei Fan et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Engineering, Manufacturing

Assessment of F-III and F-12 aramid fiber/epoxy interfacial adhesions based on fiber bundle specimens

Guocheng Qi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fatigue deformation behavior and fiber failure mechanism of ultra-high toughness cementitious composites in compression

Bo-Tao Huang et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Composites

Facile fabrication of hierarchically structured PBO-Ni(OH)2/NiOOH fibers for enhancing interfacial strength in PBO fiber/epoxy resin composites

Lei Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Characterization & Testing

A new apparatus to measure the effect of temperature and light on the bending fatigue properties of Kevlar 49 and PBO fibers

Guangming Cai et al.

POLYMER TESTING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of stitch density on tensile properties and damage mechanisms of stitched carbon/epoxy composites

Arief Yudhanto et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Composites

Effect of stitch density and stitch thread thickness on damage progression and failure characteristics of stitched composites under out-of-plane loading

K. T. Tan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Composites

Effect of stitch density and stitch thread thickness on compression after impact strength and response of stitched composites

K. T. Tan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Manufacturing

Effect of stitch density and stitch thread thickness on low-velocity impact damage of stitched composites

K. T. Tan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Engineering, Manufacturing

A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites

A. P. Mouritz et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Engineering, Manufacturing

Assessment of interfacial bonding between polymer threads and epoxy resin by transverse fibre bundle (TFB) tests

Shiqiang Deng et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Materials Science, Composites

Effect of stitch spacing on mechanical properties of carbon/silicon carbide composites

Jingjiang Nie et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Materials Science, Composites

Tensile fatigue properties of 3D composites with through-thickness reinforcement

A. P. Mouritz

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Engineering, Mechanical

Fatigue damage of GFRP laminates consisting of stitched unit layers

Yuuta Aono et al.

INTERNATIONAL JOURNAL OF FATIGUE (2008)

添加到收藏夹

Article Materials Science, Composites

Characterization of tensile damage progress in stitched CFRP laminates

Akinori Yoshimura et al.

ADVANCED COMPOSITE MATERIALS (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.