Comparative performance of various susceptor materials and vertical cavity shapes for selective microwave hybrid heating (SMHH)

Article Thermodynamics

Joining of dissimilar metals by microwave hybrid heating: 3D numerical simulation and experiment

S. Tamang et al.

Summary: The study on joining oxygen free copper to stainless steel using microwave energy through simulation and experimentation showed that the porosity at the interlayer decreases with an increase in microwave exposure time.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Chemistry, Physical

Microwave Heating Capabilities of Different Susceptor Material: Experimental and Simulation Study

Deepak Kumar Patel et al.

Summary: Sustainable product development and efficient use of resources are key concerns in modern manufacturing. This study focuses on energy efficient microwave heating techniques for different microwave absorbing materials, with A5 grade alumina and silicon carbide showing the highest heating rates. Experimentation and modeling results demonstrate a strong link between microwave heating behavior for various material processing applications.

SILICON (2022)

添加到收藏夹

Article Energy & Fuels

Modeling of process and analysis of drying characteristics for natural TiO2 under microwave heating

Hewen Zheng et al.

Summary: This paper discusses the factors affecting the microwave drying characteristics of rutile TiO2 and fits the data with nine common thin layers drying kinetic models. The results show that the drying efficiency of rutile TiO2 is positively related to microwave power, initial moisture content, and initial mass. The Modified Page model agrees well with the experimental data and provides a theoretical and scientific basis for the application of microwave drying techniques in the metallurgy and chemical industry.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Susceptors on Joining of AA6061-T6 to AZ31B by Microwave Hybrid Heating

S. Tamang et al.

Summary: The study investigated the joining of AA6061-T6 to AZ31B using zinc powder and microwave hybrid heating, which hindered the formation of Al-Mg intermetallic compounds and achieved a good metallurgical joint. The use of graphite susceptors resulted in faster joint formation compared to activated charcoal, but formed an irregular reaction zone.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Engineering, Manufacturing

Microstructural and mechanical properties of mild steel pipes joined using selective microwave hybrid heating

Ankush Thakur et al.

Summary: Microwave joining is an eco-friendly technique that can significantly reduce energy consumption and improve the quality and performance of materials. This study successfully joined mild steel pipes placed horizontally in a conventional microwave oven, and characterized the microstructural and mechanical properties of the welded joint.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Materials Science, Ceramics

Phase stability and microstructure morphology of microwave-sintered magnesia-partially stabilised zirconia

Guo Chen et al.

Summary: This study introduced microwave heating into the preparation process of zirconia materials to improve stability and microstructure of MgO-partially stabilised zirconia (MgO-PSZ). The effects of microwave heating on phase stability, microstructure, and surface morphology were evaluated, showing that microwave treatment significantly increased the stability rate of MgO-PSZ sample. Additionally, a decrease in m-ZrO2 phase content and improvement in microstructure were observed in the microwave-sintered MgO-PSZ sample. This research provided optimal microwave heating conditions for enhanced performance of MgO-PSZ material and laid a foundation for further research on zirconia materials prepared using microwave heating technology.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of modal characteristics of SS202-SS202 lap joint produced using selective microwave hybrid heating

Rahul Samyal et al.

Summary: Microwave joining is a promising method for connecting different materials, such as metals, nonmetals, alloys, and ceramics. However, joining long bulk metals remains a challenge. Experimental results show that an exposure time of 19 minutes is optimal for producing high-quality joints.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effect of input power and interfacial powder size on microwave joining of different materials: A review

Devendra L. Kamble et al.

Summary: This paper reviews the application of microwave energy in processing different materials and examines the effects of microwave source input power and interfacial powder size on joint characteristics of different materials. It is found that most materials can be joined using a microwave heating source, and researchers have studied the characteristics of the joints using various characterization techniques.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Environmental

Dielectric properties and thermal behavior of electrolytic manganese anode mud in microwave field

Kangqiang Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A literature review on the exposure time of microwave based welding of different materials

Sahil Nandwani et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

An experimental study to predict the exposure time for microwave based joining of different grades of stainless steel material

Rahul Samyal et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Thermodynamics

3D numerical modelling of microwave heating of SiC susceptor

S. Tamang et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Role of particle size in microwave processing of metallic material systems

Apurbba Kumar Sharma et al.

MATERIALS SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Microwave dielectric heating: Applications on metals processing

D. El Khaled et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Susceptor-Assisted Enhanced Microwave Processing of Ceramics - A Review

Madhuchhanda Bhattacharya et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2017)

添加到收藏夹

Article Engineering, Manufacturing

An overview on microwave processing of material: A special emphasis on glass melting

Ashis K. Mandal et al.

MATERIALS AND MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Engineering, Manufacturing

Joining of mild steel pipes using microwave hybrid heating at 2.45 GHz and joint characterization

Dhirendra Gamit et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Engineering, Manufacturing

An investigation on joining of Al6061-T6 to AZ3113 by microwave hybrid heating using active braze alloy as an interlayer

S. Tamang et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Engineering, Manufacturing

Effects of powder size of interface material on selective hybrid carbon microwave joining of SS304-SS304

Lucky Bagha et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Thermodynamics

Sensitivity analysis on the microwave heating of coal: A coupled electromagnetic and heat transfer model

Baiquan Lin et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

On melting characteristics of bulk Al-7039 alloy during in-situ microwave casting

Radha Raman Mishra et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Review Engineering, Manufacturing

Microwave-material interaction phenomena: Heating mechanisms, challenges and opportunities in material processing

Radha Raman Mishra et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review of Research Trends in Microwave Processing of Metal-Based Materials and Opportunities in Microwave Metal Casting

Radha Raman Mishra et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2016)

添加到收藏夹

Review Thermodynamics

A review on the susceptor assisted microwave processing of materials

Madhuchhanda Bhattacharya et al.

ENERGY (2016)

添加到收藏夹

Review Chemistry, Physical

Review on Microwave-Matter Interaction Fundamentals and Efficient Microwave-Associated Heating Strategies

Jing Sun et al.

MATERIALS (2016)

添加到收藏夹

Article Engineering, Manufacturing

Joining of Inconel-625 alloy through microwave hybrid heating and its characterization

Ravindra I. Badiger et al.

JOURNAL OF MANUFACTURING PROCESSES (2015)

添加到收藏夹

Review Engineering, Manufacturing

Microwave Processing of Materials and Applications in Manufacturing Industries: A Review

Satnam Singh et al.

MATERIALS AND MANUFACTURING PROCESSES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of bulk stainless steel joints developed through microwave hybrid heating

Amit Bansal et al.

MATERIALS CHARACTERIZATION (2014)

添加到收藏夹

Review Food Science & Technology

Microwave food processing-A review

S. Chandrasekaran et al.

FOOD RESEARCH INTERNATIONAL (2013)

添加到收藏夹

Article Engineering, Chemical

A finite element model for simulating temperature distributions in rotating food during microwave heating

Shixiong Liu et al.

JOURNAL OF FOOD ENGINEERING (2013)

添加到收藏夹

Review Engineering, Chemical

Microwave Material Processing-A Review

S. Chandrasekaran et al.

AICHE JOURNAL (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Joining of natural fiber reinforced composites using microwave energy: Experimental and finite element study

Pramendra Kumar Bajpai et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Joining of mild steel plates using microwave energy

Amit Bansal et al.

ADVANCES IN MATERIALS AND PROCESSING: CHALLENGES AND OPPORTUNITIES (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

Prospects of microwave processing: An overview

S. Das et al.

BULLETIN OF MATERIALS SCIENCE (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microwave sintering of Ni-Zn ferrites: comparison with conventional sintering

P Yadoji et al.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Ceramics

Microwave processing of sprayed alumina composite for enhanced performance

AK Sharma et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)

添加到收藏夹

Article Nanoscience & Nanotechnology

Processing materials with microwave energy

DE Clark et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

添加到收藏夹

Comparative performance of various susceptor materials and vertical cavity shapes for selective microwave hybrid heating (SMHH)

相关参考文献

导出引文

分享论文