☆ 4.7 Article

Study on stability and microstructure properties of oscillating laser welded 5A06 alloy with narrow gap

OPTICS AND LASER TECHNOLOGY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Industrial

Effect of beam oscillation frequency on spattering in remote laser stitch welding of thin-gage zinc-coated steel with keyhole penetration

Zixuan Wan et al.

Summary: This paper investigates the effect of beam oscillation frequency on spatter behavior in remote laser welding of thin-gauge zinc-coated steel. The experimental study shows that using a zigzag beam oscillation can improve weld aesthetics and reduce spatter-induced mass loss. Numerical simulations reveal that a suitable oscillation frequency leads to stable keyhole formation and reduced spatter.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Optics

Effects of laser beam oscillation welding parameters on Al-Si coated 22MnB5 weld joint properties

Wei Xu et al.

Summary: In this study, the laser beam oscillation welding approach was used to weld the Al-Si coated 22MnB5 steel, and the process parameters were optimized to improve the joint strength. The experimental results showed that the laser power had the largest effect on the tensile strength of the welded joint.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Industrial

Study of porosity suppression in oscillating laser-MIG hybrid welding of AA6082 aluminum alloy

Lei Wang et al.

Summary: The use of beam oscillation in oscillating laser-MIG hybrid welding of AA6082 aluminum alloy effectively suppresses porosity, especially at low arc current levels. Increasing the oscillating amplitude and frequency further reduces the percentage of porosity. The formation and suppression of porosity is influenced by the frequency of oscillation, with a threshold frequency for porosity-free welding achieved at different amplitudes.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Industrial

A novel approach to regulate energy allocation and melt flow in narrow gap laser welding with electromagnetic assisted wire wobbling

Junzhao Li et al.

Summary: Electromagnetic assisted wire wobble laser welding can broaden the melt pool size, improve wettability, obtain an uneven welding morphology, and enhance the uniformity of temperature and element distribution in the welding area through forced convection.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of scan paths on flow dynamics and weld formations during oscillating laser welding of 5A06 aluminum alloy

Liqun Li et al.

Summary: The cycloid scan path in laser welding of 5A06 aluminum alloys produces the largest molten pools with regular morphology and lowest temperature gradients, leading to reduction in porosity formation. Additionally, the shallow keyhole, low and highly homogeneous melt flow velocity, and complicated vortices contribute to this reduction.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Optics

Welding stability and fatigue performance of laser welded low alloy high strength steel with 20 mm thickness

Chunming Wang et al.

Summary: The study showed that high power laser welding and narrow gap hybrid laser-arc welding have their own characteristics in butt joint of low alloy high strength steel, and it is essential to control the laser power and the behavior of the molten metal at the tip of the wire to avoid instability and welding defects. The fatigue property of the laser weld was superior to that of the hybrid weld, which was attributed to the fine multidirectional grains within the laser weld and the precipitation of particle phases inside the hybrid weld.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Porosity suppressing and grain refining of narrow-gap rotating laser-MIG hybrid welding of 5A06 aluminum alloy

Xiaoyi Yang et al.

Summary: The study demonstrates that an appropriate rotating laser can effectively reduce porosity, improve joint quality, and enhance sidewall fusion in NG-RLMHW of 5A06 aluminum alloy. The stirring effect of the rotating laser results in smaller grain size and more uniform temperature gradient in the molten pool, promoting the morphology transformation in the weld metal.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Laser beam oscillation welding of aluminum alloy using the spatially modulated beam by diffractive optical element (DOE)

SeungGu Kang et al.

Summary: The study compared the characteristics of modulated beam welding (MBW) and Gaussian beam welding (GBW), finding that the modulated beam welding was more effective in forming a stable melt pool, reducing weld defects, and improving the asymmetric morphology of the weld. Additionally, the modulated beam welding resulted in a relatively uniform temperature distribution, leading to a reduction in the proportion of low and high angle grain boundaries and larger grains in the weld zone compared to the GBW.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Laser welding of ultra-high strength steel with different oscillating modes

Cong Chen et al.

Summary: By discussing the impact of different oscillating modes on UHSS welded joints, it was found that circular oscillation mode can achieve better welding results and improve the mechanical properties of welded joints.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Research on the Microstructure Characteristic and Tensile Property of Laser-MIG Hybrid Welded Joint for 5A06 Aluminum Alloy

Yanqiu Zhao et al.

METALS AND MATERIALS INTERNATIONAL (2020)

添加到收藏夹

Article Optics

Process stability and parameters optimization of narrow-gap laser vertical welding with hot wire for thick stainless steel in nuclear power plant

Junzhao Li et al.

OPTICS AND LASER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: Morphology, microstructure and mechanical properties

Shangren Li et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Optics

Studies on the formation mechanism of incomplete fusion defects in ultra-narrow gap laser wire filling welding

Tao Yang et al.

OPTICS AND LASER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Modeling of weld formation in variable groove narrow gap welding by rotating GMAW

Wenhang Li et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Optics

Laser beam oscillating welding of 5A06 aluminum alloys: Microstructure, porosity and mechanical properties

Zhimin Wang et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Optics

Research on the ∞-shaped laser scanning welding process for aluminum alloy

Genyu Chen et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on the weldability, microstructure and mechanical properties of thick Inconel 617 plate using narrow gap laser welding method

Junhao Su et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Engineering, Industrial

Melt flow and thermal transfer during magnetically supported laser beam welding of thick aluminum alloy plates

Jicheng Chen et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Flow dynamics during single- and dual-spot laser welding with one common keyhole of 321 stainless steel

Liqun Li et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Optics

Reduction of pores by means of laser beam oscillation during remote welding of AlMgSi

Florian Fetzer et al.

OPTICS AND LASERS IN ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimization of the solidification conditions by means of beam oscillation during laser beam welding of aluminum

Christian Hagenlocher et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties in friction stir welded 5A06 aluminum alloy thick plate

Ning Guo et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy

Lei Wang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Engineering, Industrial

Weld formation mechanism of fiber laser oscillating welding of austenitic stainless steel

Kangda Hao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solidification crack and morphology for laser weave welding of Al 5J32 alloy

C. Kim et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Laser-multi-pass-narrow-gap-welding of hot crack sensitive thick aluminum plates

D. Dittrich et al.

LASERS IN MANUFACTURING (LIM 2013) (2013)

添加到收藏夹

Article Engineering, Mechanical

Porosity in fiber laser formation of 5A06 aluminum alloy

Yangchun Yu et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of magnetic stirring on grain structure refinement Part 2-Nickel alloy weld overlays

Y. C. Lim et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Suppression of porosity in beam weaving laser welding

X Zhang et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

CO2 and Nd:YAG laser beam welding of 6111-T4 aluminum alloy for automotive applications

S Ramasamy et al.

JOURNAL OF LASER APPLICATIONS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.