☆ 4.5 Article

High sensitivity strain sensor based on a novel offset-core single micro-tapered fiber-optic Mach-Zehnder interferometer

OPTICAL FIBER TECHNOLOGY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Optics

U-shape core-offset fiber sensor with submicrostrain resolution over a 35 millistrain range

Huibo Fan et al.

Summary: This study proposes a U-shape core-offset fiber sensor with four fiber segments for large strain sensing. The sensor utilizes a spring-like microstructure fiber with a large transverse bending radius to achieve continuous strain detection. The sensor has high sensitivity and a large strain range, enabling both compression and tension measurement.

APPLIED OPTICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Tension and Torsion Sensing With a Double-Taper Mach-Zehnder Interferometer

Pourya Ghasemi et al.

Summary: A novel setup for a Double-Taper Mach-Zehnder Interferometer (DTMZI) is presented in this article to measure axial strain and torsion. The experimental results confirm the modal filtering effect of the epoxy and the relationships between the spectral shifts and applied displacements are obtained through differential accumulated phase analysis.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2022)

添加到收藏夹

Article Optics

Tapered-open-cavity-based in-line Mach-Zehnder interferometer for highly sensitive axial-strain measurement

Chuanxu Liu et al.

Summary: This study proposes an in-line Mach-Zehnder interferometer based on a multimode-fiber-assisted tapered open-cavity (TOC). Experimental results show that the interferometer has a linear wavelength shift of over -45 pm/mu epsilon with applied axial-strain. Due to its compact size and low cost, the sensor is promising for high-precision engineering applications related to axial-strain.

OPTICS EXPRESS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Dual tapered optical fiber for simultaneous detection of curvature and strain

J. R. Ek-Ek et al.

Summary: This study presents a method for simultaneous detection of curvature and strain in optical fiber. By analyzing the interference spectrum, different physical parts of the fiber structure can be distinguished and monitored. Curvature detection is achieved using a specific modulation frequency, while strain information is extracted through phase analysis. This method can be used for simultaneous detection in optical fiber sensors.

OPTICAL FIBER TECHNOLOGY (2022)

添加到收藏夹

Article Optics

Stress applying TPMF based sensor for simultaneous temperature and strain measurement

Gang Zhang et al.

Summary: This paper proposes an in-fiber Mach-Zehnder sensor using thin polarization maintaining fiber (TPMF) for simultaneous temperature and strain measurement. Experimental results demonstrate high sensitivity, good measurement resolution, and potential application in engineering.

OPTIK (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Curvature and Temperature Sensor Based on Anti-Resonant Effect Combined With Multimode Interference

Shun Wang et al.

Summary: The inline fiber sensor proposed in this study utilizes the anti-resonant effect and multimode interference to simultaneously measure curvature and temperature, showing advantages in repeatability of fabrication, robust structure, and cost-effectiveness.

IEEE PHOTONICS TECHNOLOGY LETTERS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Dual-Point Refractive Index Measurements Using Coupled Seven-Core Fibers

Natanael Cuando-Espitia et al.

Summary: The proposed experimental setup uses a single optical signal to measure the refractive index of two independent liquid samples, employing seven-core fiber and single mode fiber for testing, and utilizing methods such as optical spectrum analysis and Fourier transform for measurement and calculation.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Temperature and Strain Sensing With Hybrid Interferometer

Lashari Ghulam Abbas et al.

Summary: The study presents a hybrid interferometer design that utilizes a combination of different fiber types to achieve simultaneous measurement of strain and temperature. Experimental results demonstrate that the hybrid interferometer has high sensitivity and can be widely applied in various fields.

IEEE SENSORS JOURNAL (2021)

添加到收藏夹

Article Optics

Tapered multicore fiber interferometer for ultra-sensitive temperature sensing with thermo-optical materials

Shu Cheng et al.

Summary: By applying PDMS on a tapered multicore fiber, the temperature sensitivity of the interferometer can be improved. Experimental results show that reducing the tapered waist diameter of the fiber can enhance temperature sensitivity, with the sensor exhibiting high sensitivity of 5-25 nm/degrees C within the temperature range of 50 degrees C down to 10 degrees C.

OPTICS EXPRESS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Fabry-Perot Interferometer With Asymmetrical Tapered-Fiber for Improving Strain Sensitivity

Yanping Chen et al.

Summary: By reducing the material volume of the air cavity with asymmetrical tapered fiber and splicing/tapering the fiber at the misaligned center of the cavity, high-sensitive strain sensors are fabricated. Experimental results indicate that the asymmetrical tapered fiber leads to higher strain sensitivity, along with the advantages of repeatability, sensitivity, and compact size.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2021)

添加到收藏夹

Article Optics

Magnetic field measurement based on a fiber laser oscillation circuit merged with a polarization-maintaining fiber Sagnac interference structure

Jing Tian et al.

Summary: The compact optical magnetic field sensor proposed in this work combines a PMF-Sagnac loop with a fiber laser oscillation circuit to increase the signal-to-noise ratio and quality of the reflection spectrum. It demonstrates high sensitivity, stability, and fine reflection spectrum for different sensor head lengths.

OPTICS EXPRESS (2021)

添加到收藏夹

Article Chemistry, Analytical

Temperature Sensor Based on Periodically Tapered Optical Fibers

Bartlomiej Guzowski et al.

Summary: This paper presents the fabrication and characterization of a temperature sensor based on periodically tapered optical fibers (PTOF). The study investigates the relation between the geometry of the sensors and sensing ability, emphasizing the importance of the number of tapered regions in PTOF for temperature response. Results show that sensors with a low number of tapered regions cannot be considered effective for temperature sensing, while sensors with more tapered regions demonstrate excellent sensitivity and linear fitting.

SENSORS (2021)

添加到收藏夹

Article Optics

Microstructured optical fiber temperature sensor based on the self-phase modulation effect

Xiaoyu Chen et al.

Summary: The paper introduces a highly sensitive temperature sensor based on SPM in an in-house fabricated MOF, showing a high temperature sensitivity. The experimental results are in good agreement with theoretical simulations, providing a new approach for developing low-cost, simple structure, and high-sensitivity temperature sensors.

OPTICS EXPRESS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A New Bamboo-Shaped Sensor for Curvature Measurement With Microstructured Fiber

Ying Guo et al.

Summary: The novel bamboo-shaped interference sensor proposed in this letter is based on PBG-MF and SMF to build cascaded FPI, with higher extinction ratio and better sensitivity, small size, and high stability, suitable for ultra-short distance curvature sensing.

IEEE PHOTONICS TECHNOLOGY LETTERS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Simultaneous measurement of strain and temperature by inscribing a paired LPGs on a pre-tapered fiber

Mustafa Bilsel et al.

Summary: The newly designed all-fiber sensor employs a dual-LPG structure and electric arc technique to measure strain and temperature simultaneously. Experimental results demonstrate high sensitivity and advantages such as simple fabrication, low cost, and no splicing joints.

OPTICAL AND QUANTUM ELECTRONICS (2021)

添加到收藏夹

Article Optics

Sensitivity-enhanced temperature sensor based on encapsulated S-taper fiber Modal interferometer

Jianwen Ma et al.

Summary: The study presented a highly sensitive temperature sensor based on an S-shape fiber taper Mach-Zehnder interferometer, without the need for special fibers or micromachining techniques. By encapsulating an S-shape single mode fiber taper in a capillary filled with high thermos-optic coefficient liquid, a maximum sensitivity of -15.66 nm/degrees C was achieved. The sensor demonstrated simple configuration, ease of fabrication, robustness, and low cost, making it suitable for high sensitivity temperature sensing applications.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Bragg Gratings in Two-Core Rectangular Fiber for Discrimination of Curvature, Strain, and Temperature Measurements

Lin Htein et al.

Summary: A rectangular fiber with two cores of different refractive indices was developed for discriminating temperature effects during strain or curvature measurements. The fiber showed high sensitivities in strain, curvature, and temperature measurements, providing better strain coupling between the object and the fiber.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

In-Fiber Capillary-Based Micro Fabry-Perot Interferometer Strain Sensor

Carmen E. Dominguez-Flores et al.

IEEE SENSORS JOURNAL (2020)

添加到收藏夹

Article Optics

Magnetic field and temperature dual-parameter sensor based on magnetic fluid materials filled photonic crystal fiber

Ji Wang et al.

OPTICS EXPRESS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Investigating the Refractive Index Sensitivity of U-Bent Fiber Optic Sensors Using Ray Optics

Christina Grace Danny et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

A high sensitivity optical fiber strain sensor based on hollow core tapering

Leigang Dong et al.

OPTICAL FIBER TECHNOLOGY (2020)

添加到收藏夹

Article Optics

Cascaded Fabry-Perot interferometer-regenerated fiber Bragg grating structure for temperature-strain measurement under extreme temperature conditions

Qin Tian et al.

OPTICS EXPRESS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Compact Ultra-Long Period Fiber Grating Based on Cascading Up-Tapers

Shanshan Zhang et al.

IEEE SENSORS JOURNAL (2020)

添加到收藏夹

Article Optics

Novel temperature-independent microfiber sensor fabricated with the tapering-twisting-tapering technique

Yuhao Qian et al.

APPLIED OPTICS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

High-Sensitivity Temperature and Strain Measurement in Dual-Core Hybrid Tapers

Song Gao et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2018)

添加到收藏夹

Article Optics

Refractive-index-sensing optical comb based on photonic radio-frequency conversion with intracavity multi-mode interference fiber sensor

Ryo Oe et al.

OPTICS EXPRESS (2018)

添加到收藏夹

Article Optics

In-fiber Fabry-Perot interferometer for strain and magnetic field sensing

Greice K. B. Costa et al.

OPTICS EXPRESS (2016)

添加到收藏夹

Article Optics

Supermode Bragg grating combined Mach-Zehnder interferometer for temperature-strain discrimination

Zhifang Wu et al.

OPTICS EXPRESS (2015)

添加到收藏夹

Article Optics

High-sensitivity strain sensor based on in-fiber improved Fabry-Perot interferometer

Shen Liu et al.

OPTICS LETTERS (2014)

添加到收藏夹

Article Optics

A strain sensor based on in-line fiber Mach-Zehnder interferometer in twin-core photonic crystal fiber

Khurram Karim Qureshi et al.

OPTICS COMMUNICATIONS (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

S-Tapered Fiber Sensors for Highly Sensitive Measurement of Refractive Index and Axial Strain

Rui Yang et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2012)

添加到收藏夹

Article Physics, Applied

Refractometric sensors based on microsphere resonators

NM Hanumegowda et al.

APPLIED PHYSICS LETTERS (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.