4.5 Article

The influence of full drifts on density shoulder formation at the midplane by numerical modeling

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Physics, Fluids & Plasmas

Detached regime with highly radiating X-point: Physics and modelling

Ilya Senichenkov et al.

Summary: Recent experiments on ASDEX Upgrade, JET, and DIII-D have demonstrated the possibility of operating with fully detached targets and highly radiating X-point. Intensive impurity seeding and feedback control have allowed for the radiated power fraction of up to 90% without confinement degradation. This regime shows promise for future reactor scale tokamaks.

CONTRIBUTIONS TO PLASMA PHYSICS (2022)

Article Physics, Fluids & Plasmas

Effects of recycling neutral on density shoulder formation in tokamak plasmas

Xingquan Wu et al.

Summary: The study shows that in a tokamak plasma system, controlling the intensity and position of S(eff) can offset the impact of L(SOL) on density profiles, leading to the formation of SOL density shoulders.

NUCLEAR FUSION (2022)

Article Physics, Fluids & Plasmas

A spectroscopic inference and SOLPS-ITER comparison of flux-resolved edge plasma parameters in detachment experiments on TCV

A. Perek et al.

Summary: This work presents the use of a collisional-radiative model to infer plasma parameters from 2D emissivities of several deuterium Balmer lines. The analysis compares and validates the results against a simulation and reveals the effects of particle transport in the scrape-off layer. The study also shows prospects for aiding the power exhaust control efforts.

NUCLEAR FUSION (2022)

Article Physics, Fluids & Plasmas

Multi-machine SOLPS-ITER comparison of impurity seeded H-mode radiative divertor regimes with metal walls

V Rozhansky et al.

Summary: The study compared the SOLPS-ITER modeling databases of three tokamaks and found that machine size affects edge plasma performance. Comparing the radiating impurity species Ne and N, it was shown that N performs better in the divertor region due to its smaller FIP and Ne can be more efficient at higher plasma temperatures, leading to increased efficiency in larger machines.

NUCLEAR FUSION (2021)

Article Physics, Fluids & Plasmas

Investigation of the density shoulder formation by using self-consistent simulations of plasma turbulence and neutral kinetic dynamics

D. Mancini et al.

Summary: Simulations of plasma turbulence in a lower single-null magnetic configurations show that increased core fuelling leads to changes in plasma scrape-off layer (SOL) density and temperature profile, consistent with experimental observations. The increase of far SOL density at high-fuelling rates is mainly caused by the strong decrease of parallel transport, due to the cooling of electrons resulting from ionization events. The formation of a density shoulder in high-fuelling scenarios is also observed, indicating the impact of core fuelling on plasma dynamics.

NUCLEAR FUSION (2021)

Article Physics, Fluids & Plasmas

The operational space for divertor power exhaust in DEMO with a super-X divertor

L. Xiang et al.

Summary: The study using SOLPS-ITER simulations on the European DEMO reactor with a Super-X divertor found that the Super-X divertor offers increased operational space and robustness compared to the conventional single-null configuration. Additionally, the Super-X divertor has lower impurity concentration at the same main plasma density, in line with simple analytical predictions. This increased robustness is mainly due to the divertor's capability to dissipate power via argon radiation at acceptable concentration, related to a longer parallel connection length and higher extrinsic impurity concentration.

NUCLEAR FUSION (2021)

Article Physics, Fluids & Plasmas

Dependence of upstream SOL density shoulder on divertor neutral pressure observed in L-mode and H-mode plasmas in the EAST superconducting tokamak

N. Yan et al.

Summary: The study on the density profiles in the scrape-off layer (SOL) of plasma in EAST tokamak revealed that, in both L-mode and H-mode discharges, the primary factor for the formation of an SOL density shoulder in the upper single-null discharges is the neutral pressure in the lower divertor, rather than the divertor detachment. This suggests that an increase in neutral pressure in the lower divertor plays a key role in the expansion of the weak shoulder into the SOL region, independent of divertor detachment.

NUCLEAR FUSION (2021)

Article Physics, Fluids & Plasmas

Effects of divertor electrical drifts on particle distribution and detachment near the divertor target plate in DIII-D

H. Q. Wang et al.

Summary: The study demonstrates the strong impact of drifts on the divertor plasma in-out asymmetry and detachment, with physical coupling between drift flow and sheath boundary conditions. Increasing density under reversed B-T conditions flattens the target temperature profile, but effective detached plasma is still difficult to achieve.

PHYSICS OF PLASMAS (2021)

Article Physics, Fluids & Plasmas

Numerical modelling of an enhanced perpendicular transport regime in the scrape-off layer of ASDEX Upgrade

A. Zito et al.

Summary: The study investigates how increasing perpendicular transport affects the SOL plasma. By simulating an L-mode discharge on the ASDEX Upgrade tokamak, it was found that increased transport resulted in the experimentally observed density shoulder and partial detachment of the divertor plasma.

PLASMA PHYSICS AND CONTROLLED FUSION (2021)

Article Physics, Fluids & Plasmas

The role of plasma-molecule interactions on power and particle balance during detachment on the TCV tokamak

K. Verhaegh et al.

Summary: The experimental results and simulations indicate that D-2(+) plays a significant role in plasma-molecule interactions in the tokamak, contributing considerably to particle and power losses.

NUCLEAR FUSION (2021)

Article Physics, Fluids & Plasmas

SOLPS-ITER modeling of ASDEX Upgrade L-mode detachment states

H. Wu et al.

Summary: The study used SOLPS-ITER to model ASDEX Upgrade L-mode detachment states and validated the results against experimental data. The modeling results showed good agreement in predicting particle flux at the inner target, while underestimating the particle flux at the outer target by a factor of about 2 to 3 in onset of detachment and fluctuating detachment states.

PLASMA PHYSICS AND CONTROLLED FUSION (2021)

Article Physics, Fluids & Plasmas

Simulation of tungsten target erosion and tungsten impurity transport during argon seeding on EAST

Yilin Wang et al.

Summary: The study reveals that argon seeding significantly influences target erosion and W impurity transport by reducing plasma temperature and introducing heavier incident particles to affect erosion process. Eroded W flux affects W core accumulation, while divertor plasma condition remarkably influences W impurity transport. Correlation between peak electron temperature at the outer target and W concentration at the core-edge-interface is found. The influence of W impurity on the background boundary plasma is evaluated.

PLASMA PHYSICS AND CONTROLLED FUSION (2021)

Article Physics, Fluids & Plasmas

Scrape-off layer transport and filament characteristics in high-density tokamak regimes

N. Vianello et al.

NUCLEAR FUSION (2020)

Article Physics, Fluids & Plasmas

SOLPS-ITER modeling of SOL-divertor plasmas with different configurations in EAST

Y. P. Chen et al.

NUCLEAR FUSION (2020)

Article Physics, Fluids & Plasmas

Enhanced particle flux due to localized divertor MHD instability in DIII-D tokamak

H. Q. Wang et al.

PHYSICS OF PLASMAS (2020)

Article Physics, Fluids & Plasmas

SOLPS-ITER modeling with activated drifts for a snowflake divertor in ASDEX Upgrade

O. Pan et al.

PLASMA PHYSICS AND CONTROLLED FUSION (2020)

Article Physics, Fluids & Plasmas

The erosion of tungsten divertor on EAST during neon impurity seeding in different divertor operation regimes

Xuele Zhao et al.

PLASMA PHYSICS AND CONTROLLED FUSION (2020)

Article Nuclear Science & Technology

Experimental verification of X-point potential well formation in unfavorable magnetic field direction

M. Wensing et al.

NUCLEAR MATERIALS AND ENERGY (2020)

Article Physics, Fluids & Plasmas

Drift effects on W7-X divertor heat and particle fluxes

K. C. Hammond et al.

PLASMA PHYSICS AND CONTROLLED FUSION (2019)

Article Nuclear Science & Technology

Modeling of fuel retention and hydrogen-isotope exchange removal from the pre-damaged tungsten material

Zhenhou Wang et al.

FUSION ENGINEERING AND DESIGN (2018)

Article Physics, Fluids & Plasmas

On the role of filaments in perpendicular heat transport at the scrape-off layer

D. Carralero et al.

NUCLEAR FUSION (2018)

Article Physics, Fluids & Plasmas

Effects of carbon impurities on the power radiation and tungsten target erosion in EAST

Chaofeng Sang et al.

PHYSICS OF PLASMAS (2018)

Article Physics, Fluids & Plasmas

SOLPS modeling of the effect on plasma detachment of closing the lower divertor in DIII-D

C. F. Sang et al.

PLASMA PHYSICS AND CONTROLLED FUSION (2017)

Article Physics, Fluids & Plasmas

Recent progress towards a quantitative description of filamentary SOL transport

D. Carralero et al.

NUCLEAR FUSION (2017)

Article Nuclear Science & Technology

A study on the density shoulder formation in the SOL of H-mode plasmas

D. Carralero et al.

NUCLEAR MATERIALS AND ENERGY (2017)

Article Nuclear Science & Technology

SOLPS-ITER Study of neutral leakage and drift effects on the alcator C-Mod divertor plasma

W. Dekeyser et al.

NUCLEAR MATERIALS AND ENERGY (2017)

Article Nuclear Science & Technology

The high field side high density region in SOLPS-modeling of nitrogen-seeded H-modes in ASDEX Upgrade

F. Reimold et al.

NUCLEAR MATERIALS AND ENERGY (2017)

Article Nuclear Science & Technology

Drifts, currents, and power scrape-off width in SOLPS-ITER modeling of DIII-D

E. T. Meier et al.

NUCLEAR MATERIALS AND ENERGY (2017)

Article Physics, Fluids & Plasmas

Characterisation of the L-mode scrape off layer in MAST: decay lengths

F. Militello et al.

NUCLEAR FUSION (2016)

Article Physics, Fluids & Plasmas

Analysis of drift effects on the tokamak power scrape-off width using SOLPS-ITER

E. T. Meier et al.

PLASMA PHYSICS AND CONTROLLED FUSION (2016)

Article Materials Science, Multidisciplinary

The new SOLPS-ITER code package

S. Wiesen et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Article Physics, Multidisciplinary

Experimental Validation of a Filament Transport Model in Turbulent Magnetized Plasmas

D. Carralero et al.

PHYSICAL REVIEW LETTERS (2015)

Article Physics, Fluids & Plasmas

Influence of the E X B drift in high recycling divertors on target asymmetries

A. V. Chankin et al.

PLASMA PHYSICS AND CONTROLLED FUSION (2015)

Article Physics, Fluids & Plasmas

New B2SOLPS5.2 transport code for H-mode regimes in tokamaks

V. Rozhansky et al.

NUCLEAR FUSION (2009)

Article Materials Science, Multidisciplinary

Sputtering yields

W. Eckstein

VACUUM (2008)

Review Physics, Fluids & Plasmas

Chapter 4: Power and particle control

A. Loarte et al.

NUCLEAR FUSION (2007)

Review Physics, Fluids & Plasmas

Plasma edge physics with B2-Eirene

R Schneider et al.

CONTRIBUTIONS TO PLASMA PHYSICS (2006)

Article Physics, Fluids & Plasmas

Comparison of particle transport in the scrape-off layer plasmas of Alcator C-Mod and DIII-D

B Lipschultz et al.

PLASMA PHYSICS AND CONTROLLED FUSION (2005)

Article Physics, Fluids & Plasmas

Observations and empirical scalings of the high-confinement mode pedestal on Alcator C-Mod

JW Hughes et al.

PHYSICS OF PLASMAS (2002)

Article Physics, Fluids & Plasmas

Simulation of tokamak edge plasma including self-consistent electric fields

VA Rozhansky et al.

NUCLEAR FUSION (2001)

Article Physics, Fluids & Plasmas

Cross-field plasma transport and main-chamber recycling in diverted plasmas on Alcator C-Mod

B LaBombard et al.

NUCLEAR FUSION (2000)

Article Physics, Fluids & Plasmas

Modification of high mode pedestal instabilities in the DIII-D tokamak

JR Ferron et al.

PHYSICS OF PLASMAS (2000)