4.6 Article

Improving the Efficiency of Organic Solar Cells with Methionine as Electron Transport Layer

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Polymer Science

Boosted Efficiency Over 18.1% of Polymer Solar Cells by Employing Large Extinction Coefficients Material as the Third Component

Shuping Zhang et al.

Summary: A series of binary and ternary polymer solar cells were successfully fabricated. The optimal ternary PSCs demonstrated a significantly improved power conversion efficiency due to enhanced photon harvesting ability and higher short circuit current density and fill factor.

MACROMOLECULAR RAPID COMMUNICATIONS (2022)

Article Energy & Fuels

Efficient Semitransparent Layer-by-Layer Organic Photovoltaics via Optimizing Wide Bandgap and Narrow Absorption Polymer Layer Thickness

Chunyu Xu et al.

Summary: In this study, layer-by-layer organic photovoltaics with different degrees of transparency were fabricated. By adjusting the thickness of the top electrode and selecting suitable polymer and small molecule materials, the researchers achieved high power conversion efficiency and average visible transmittance in the semitransparent photovoltaic devices.

SOLAR RRL (2022)

Article Materials Science, Multidisciplinary

Highly efficient inverted organic solar cells with natural biomaterial histidine as electron transport layer

Chunxiang Liu et al.

Summary: In this study, the performance of inverted organic solar cells (IOSCs) is improved by introducing the biomaterial histidine to modify the materials used in the cell. The modified cells show increased efficiency and stability.

ORGANIC ELECTRONICS (2022)

Article Chemistry, Multidisciplinary

Broadband photomultiplication-type polymer photodetectors and its application in light-controlled circuit

Ming Liu et al.

Summary: In this study, photomultiplication-type polymer photodetectors (PM-PPDs) were achieved using P3HT and PY3Se-1V as the donor and acceptor, respectively. By adjusting the weight ratio and energy offset between P3HT and PY3Se-1V, PM-PPDs with broad spectral response and high external quantum efficiency (EQE) were obtained. Furthermore, incorporating a third component with high hole mobility can further enhance the performance of PM-PPDs.

SCIENCE CHINA-CHEMISTRY (2022)

Article Chemistry, Physical

Achieving 15.81% and 15.29% efficiency of all-polymer solar cells based on layer-by-layer and bulk heterojunction structures

Wenjing Xu et al.

Summary: In this study, wide bandgap polymer donor PM6 and narrow bandgap polymer acceptor PY-IT were used to fabricate all-polymer solar cells. The addition of the solvent additive 1-chloronaphthalene (CN) greatly enhanced the performance of the cells, leading to improved power conversion efficiency.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Multidisciplinary

Manipulating the D:A interfacial energetics and intermolecular packing for 19.2% efficiency organic photovoltaics

Chengliang He et al.

Summary: Manipulating the donor:acceptor energetics is crucial for achieving balanced charge separation and recombination in organic solar cells (OSCs). In this study, a non-fullerene electron acceptor, BTP-H2, was designed and synthesized to pair with the polymer donor PM6, showing strong intermolecular interaction and near-zero highest occupied molecular orbital (HOMO) offset. The results demonstrated efficient charge separation and optimized energy conversion, leading to high-performance OSCs with a power conversion efficiency (PCE) of 18.5% and a peak photon-to-electron response of approximately 90%.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Chemistry, Physical

Highly efficient inverted polymer solar cells by using solution processed MgO/ZnO composite interfacial layers

Shuai Huang et al.

Summary: A highly efficient inverted polymer solar cell was demonstrated by utilizing a MgO/ZnO bilayer structure as an effective cathode interfacial layer. This structure combines the advantages of ZnO ETL and MgO film, resulting in enhanced electron collection efficiency and suppressed carrier recombination at the interface, leading to a superior power conversion efficiency compared to PSCs without MgO.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Nanoscience & Nanotechnology

An Efficiency of 16.46% and a T80 Lifetime of Over 4000 h for the PM6:Y6 Inverted Organic Solar Cells Enabled by Surface Acid Treatment of the Zinc Oxide Electron Transporting Layer

Yunfei Han et al.

Summary: The surface pH conditions of solution-processed ZnO films were found to be closely related to the performance and stability of NFA OSCs. Treating ZnO films with acid solutions improved device performance, while removal of surface -OH groups alleviated performance issues and improved stability. Acid solutions, particularly PET treatment, were effective in enhancing performance, leading to long-term stability of the heterojunction solar cell.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

18.4 % Organic Solar Cells Using a High Ionization Energy Self-Assembled Monolayer as Hole-Extraction Interlayer

Yuanbao Lin et al.

Summary: Self-assembled monolayers based on Br-2PACz, 2PACz, and MeO-2PACz were investigated as hole-extracting interlayers in organic photovoltaics. OPV cells using ITO/Br-2PACz anodes exhibited the highest power conversion efficiency due to the significantly higher work function of the ITO/Br-2PACz electrode, leading to improved hole transport and longer carrier lifetimes.

CHEMSUSCHEM (2021)

Article Chemistry, Multidisciplinary

Simultaneous Improvement of Efficiency and Stability of Organic Photovoltaic Cells by using a Cross-Linkable Fullerene Derivative

Ling Hong et al.

Summary: In this study, a cross-linkable material, c-PCBSD, was successfully utilized as an interfacial modification layer on the surface of OPV cells to enhance photovoltaic performance and long-term stability. The PCE of the OPV cells increased from 15.1 to 16.1% after the two-step modification, demonstrating improved stability under both thermal and air conditions.
Article Chemistry, Multidisciplinary

High-Efficiency (16.93%) Pseudo-Planar Heterojunction Organic Solar Cells Enabled by Binary Additives Strategy

Xinkang Wang et al.

Summary: The research focuses on improving the efficiency of organic solar cells by combining the SD method and additive general strategy, resulting in a vertical phase separation device with enhanced morphology using additives 1,10-decanediol and 1-chloronaphthalene. This approach showed promising results in enhancing charge separation, collection, and ultimately achieving a high power conversion efficiency of 16.93%.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Engineering, Environmental

Multi-dimensional interfacial engineering for a practical large-area transparent flexible organic photovoltaics

Jae Hoon Jeong et al.

Summary: The use of a molecular linker to regulate charge transport in organic photovoltaics has shown promising results, significantly improving efficiency, stability, flexibility, and mechanical durability of modules. After charge transport engineering, improvements were observed across various conditions, leading to a high figure of merit for transparent flexible organic photovoltaic mini-modules. This technology could potentially be applied to smart window systems.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Highly sensitive, sub-microsecond polymer photodetectors for blood oxygen saturation testing

Zijin Zhao et al.

Summary: The bottom surface of the active layer and the interface near the ITO electrode play a crucial role in the performance of PM-PPDs, with the bottom interface being more sensitive and inducing efficient charge tunneling injection. High EQE and fast response time were achieved with PMBBDT:Y6 as the active layer under forward bias, attributing to efficient hole tunneling injection from the ITO electrode. Additionally, PM-PPDs were successfully used to measure heart rate and blood oxygen saturation, yielding similar results to commercial photodetectors.

SCIENCE CHINA-CHEMISTRY (2021)

Article Materials Science, Multidisciplinary

Adenine-based polymer modified zinc oxide for efficient inverted organic solar cells

Yi Wang et al.

Summary: In this research, a polymer based on the nucleobase adenine was synthesized and found to effectively modify zinc oxide nanoparticle films, improving conductivity and device performance. Modification of the zinc oxide nanoparticle interlayer with the polymer efficiently suppressed charge recombination and enhanced the efficiency of solar cells.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

Natural biomaterial sarcosine as an interfacial layer enables inverted organic solar cells to exhibit over 16.4% efficiency

Mei Liu et al.

Summary: Sarcosine as an ETL successfully improved the performance of inverted organic solar cells by reducing the work function and increasing surface energy of ITO or ITO/ZnO, optimizing the morphology and molecular arrangement of the active layers, promoting charge transport and collection, and ultimately enhancing the power conversion efficiency.

NANOSCALE (2021)

Review Chemistry, Physical

Solution-Processed Ternary Oxides as Carrier Transport/Injection Layers in Optoelectronics

Zhanfeng Huang et al.

ADVANCED ENERGY MATERIALS (2020)

Review Physics, Condensed Matter

Engineering the photoelectrochemical behaviors of ZnO for efficient solar water splitting

Mengmeng Ma et al.

JOURNAL OF SEMICONDUCTORS (2020)

Article Chemistry, Multidisciplinary

Interfacial Modification in Organic and Perovskite Solar Cells

Shiqing Bi et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

A novel alkylsilyl-fused copolymer-based non-fullerene solar cell with over 12% efficiency

Guodong Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

Design rules for minimizing voltage losses in high-efficiency organic solar cells

Deping Qian et al.

NATURE MATERIALS (2018)

Review Chemistry, Physical

Organic solar cells based on non-fullerene acceptors

Jianhui Hou et al.

NATURE MATERIALS (2018)

Review Chemistry, Physical

Small Molecule Interlayers in Organic Solar Cells

Xiaodong Li et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

10.8% Efficiency Polymer Solar Cells Based on PTB7-Th and PC71BM via Binary Solvent Additives Treatment

Qun Wan et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Review Chemistry, Multidisciplinary

Inverted organic photovoltaic cells

Kai Wang et al.

CHEMICAL SOCIETY REVIEWS (2016)

Review Chemistry, Multidisciplinary

Stability of organic solar cells: challenges and strategies

Pei Cheng et al.

CHEMICAL SOCIETY REVIEWS (2016)

Review Chemistry, Multidisciplinary

ZnO cathode buffer layers for inverted polymer solar cells

Zhiqiang Liang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Physical

Dual Functional Zwitterionic Fullerene Interlayer for Efficient Inverted Polymer Solar Cells

Yao Liu et al.

ADVANCED ENERGY MATERIALS (2015)

Article Nanoscience & Nanotechnology

Highly Efficient Inverted Polymer Solar Cells Based on a Cross-linkable Water-/Alcohol-Soluble Conjugated Polymer Interlayer

Kai Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Multidisciplinary

Facile Doping of Anionic Narrow-Band-Gap Conjugated Polyelectrolytes During Dialysis

Cheng-Kang Mai et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

Review Chemistry, Multidisciplinary

Stability of Polymer Solar Cells

Mikkel Jorgensen et al.

ADVANCED MATERIALS (2012)

Article Chemistry, Multidisciplinary

Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte

Tingbin Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Multidisciplinary Sciences

A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics

Yinhua Zhou et al.

SCIENCE (2012)

Article Chemistry, Multidisciplinary

Enhanced Performance in Polymer Solar Cells by Surface Energy Control

Xavier Bulliard et al.

ADVANCED FUNCTIONAL MATERIALS (2010)

Article Chemistry, Multidisciplinary

Blue Luminescence of ZnO Nanoparticles Based on Non-Equilibrium Processes: Defect Origins and Emission Controls

Haibo Zeng et al.

ADVANCED FUNCTIONAL MATERIALS (2010)

Review Polymer Science

A Review on the Development of the Inverted Polymer Solar Cell Architecture

Steven K. Hau et al.

POLYMER REVIEWS (2010)

Article Materials Science, Multidisciplinary

Device physics of organic light-emitting diodes based on molecular materials

Wolfgang Bruetting et al.

ORGANIC ELECTRONICS (2001)