期刊
出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.msea.2022.143717
关键词
Cruciform welded joint; Cavitation jet peening; Ultrasonic impact treatment; Fatigue; Residual stress
类别
资金
- National Natural Science Foundation of China [51905545, U21B2076]
- National Key R & D Program of China [2021YFB4001501]
- Fundamental Research Funds for the Central Universities [20CX02219A, 2021CXGC011302]
- Key R & D Program of Shandong Province [2021CXGC011302]
- Innovation fund project for graduate students of China University of Petroleum (East China) [2021CXGC011302]
- [22CX04005A]
This study compares the effects of cavitation jet peening treatment (CJP) and ultrasonic impact treatment (UIT) on the fatigue properties of cruciform welded joints. The results show that CJP can increase the fatigue life of the welded joints, while UIT can reduce it. The influence of residual stress on fatigue life is more significant.
The filter press composed of SAF2205 cruciform welded joints generally works under cyclic conditions, resulting in the weld becoming a weak area of fatigue failure. In this study, the strengthening effect of cavitation jet peening treatment (CJP) and ultrasonic impact treatment (UIT) on fatigue properties of SAF2205 cruciform welded joints were compared by experiment. The effects of the three treatment methods, including UIT for the entire weld zone (UIT-A) and UIT only for the weld toe zone (UIT-T), and CJP for the entire weld zone, on residual stresses, surface roughness, microhardness, microstructure and fatigue fracture behavior were analyzed. The results indicate that the fatigue fracture initiation position of the fatigue specimens changed from the weld toe of the treated side to that of the untreated side after UIT-A, UIT-T and CJP. The fatigue life of the cruciform welded joint was increased by a maximum of 163.30% after CJP, while the UIT-A reduced the fatigue life. The order of residual stresses at the fatigue fracture initiation position from large to small was UIT-A, untreated, UITT and CJP specimens. Furthermore, the thickness of the formed surface strengthening layer with increased microhardness by UIT-A and CJP was 700 mu m and 400 mu m, respectively. The CJP could reduce the surface roughness, while the UIT had the opposite effect. The refined grains, higher dislocation density and deformation were generated on the surface after CJP and UIT. The effect of residual stress on fatigue life was more obvious than that of microstructure and surface roughness. Compared with UIT, CJP is a more effective treatment for improving the fatigue life of SAF2205 cruciform welded joints.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据