相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Simultaneously achieving strength and ductility in Ni3Al nanowires with superlattice intrinsic stacking faults
Zhiwei Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)
Modification mechanism and tensile property of Al-9Si-0.4Mg-0.1Cu alloy
Liang Chang et al.
MATERIALS CHARACTERIZATION (2022)
The important role of extremely low content of soluted Ce in the wide stacking faults formation in Al-Ce alloy
Chi Zhang et al.
SCRIPTA MATERIALIA (2022)
Exploiting the synergic strengthening effects of stacking faults in carbon nanotubes reinforced aluminum matrix composites for enhanced mechanical properties
Baisong Guo et al.
COMPOSITES PART B-ENGINEERING (2021)
Nucleation and growth of Al3Sc precipitates during isothermal aging of Al-0.55 wt% Sc alloy
Kang Yan et al.
MATERIALS CHARACTERIZATION (2021)
Investigating the effect of water cooling on hardness of 2xxx series aluminium alloy micro-alloyed with 0.02 and 0.04 wt% of Titanium
Manash Bhuyan et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Precipitation behavior and mechanical performances of A356.2 alloy treated by Al-Sr-La composite refinement-modification agent
Xingchuan Xia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Basal shearing of twinned stacking faults and its effect on mechanical properties in an Mg-Zn-Y alloy with LPSO phase
X. H. Shao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure and mechanical properties of die-casting ADC12+x(La+Yb) alloy
Xian-Chen Song et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2020)
Effect of microalloying and tensile deformation on the internal structures of eutectic Si phase in Al-Si alloy
Jiqiang Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Influence of Sm addition on microstructural and mechanical properties of as -extruded Mg-9Li-5Al alloy
Zhi Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Coarsening of Al3Sc precipitates in Al-Mg-Sc alloys
Pian Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of rare earth Yb on microstructure and corrosion resistance of ADC12 aluminum alloy
Yongcheng Zou et al.
INTERMETALLICS (2019)
Understanding of strengthening and toughening mechanisms for Sc-modified Al-Si-(Mg) series casting alloys designed by computational thermodynamics
Zhao Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure and mechanical properties of as-cast and T6 treated Sc modified A356-5TiB2 in-situ composite
S. L. Pramod et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The effects of neodymium addition on the intermetallic microstructure and mechanical properties of Al-7Si-0.3Mg-0.3Fe alloys
Qi Tang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Solidification behavior, microstructure and silicon twinning of Al-10Si alloys with ytterbium addition
Zhi Hu et al.
JOURNAL OF RARE EARTHS (2018)
Modification of eutectic Si and the microstructure in an Al-7Si alloy with barium addition
Jinsong Rao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effects of the addition of trace amounts of Sc on the microstructure and mechanical properties of Al-11.6Si alloys
Yu-Chih Tzeng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural evolution and mechanical properties of Al-7Si-0.3Mg alloys with erbium additions
P. Pandee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effects of Nd on microstructure and mechanical properties of cast Al-Si-Cu-Ni-Mg piston alloys
Lina Han et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Influence of strontium and lanthanum simultaneous addition on microstructure and mechanical properties of the secondary Al-Si-Cu-Fe alloy
Tang Peng et al.
JOURNAL OF RARE EARTHS (2017)
High-velocity projectile impact induced 9R phase in ultrafine-grained aluminium
Sichuang Xue et al.
NATURE COMMUNICATIONS (2017)
Synergistic effect of Sr and La on the microstructure and mechanical properties of A356.2 alloy
Chuanrong Qiu et al.
MATERIALS & DESIGN (2017)
Effect of trace yttrium addition on the microstructure and tensile properties of recycled Al-7Si-0.3Mg-1.0Fe casting alloys
Bingbing Wan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys
Jenifer Barrirero et al.
SCRIPTA MATERIALIA (2016)
Microstructure evolution and enhanced mechanical properties of eutectic Al-Si die cast alloy by combined alloying Mg and La
Diaofeng Li et al.
MATERIALS & DESIGN (2016)
Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al-12.7%Si alloys investigated by SEM/EBSD
Xiaorui Liu et al.
ACTA MATERIALIA (2015)
Solute adsorption and entrapment during eutectic Si growth in A-Si-based alloys
J. H. Li et al.
ACTA MATERIALIA (2015)
The possibilities to lower the stacking fault energies of aluminum materials investigated by first-principles energy calculations
L. H. Liu et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Microstructure, mechanical and damping properties of Mg-Er-Gd-Zn alloy reinforced with stacking faults
Chi Xu et al.
MATERIALS & DESIGN (2015)
Effects of Be additions on microstructure, hardness and tensile properties of A380 aluminum alloy
Morteza Rejaeian et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Effects of neodymium addition on microstructure and mechanical properties of near-eutectic Al-12Si alloys
Zhi Hu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
The synergic effects of Sc and Zr on the microstructure and mechanical properties of Al-Si-Mg alloy
Cong Xu et al.
MATERIALS & DESIGN (2015)
Ductility improvement of Mg alloys by solid solution: Ab initio modeling, synthesis and mechanical properties
S. Sandloebes et al.
ACTA MATERIALIA (2014)
Probing the local atomic structure of Sr-modified Al-Si alloys
P. Srirangam et al.
ACTA MATERIALIA (2014)
Preparation of a novel Al-3B-5Sr master alloy and its modification and refinement performance on A356 alloy
X. L. Cui et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
High strength aluminum cast alloy: A Sc modification of a standard Al-Si-Mg cast alloy
Arfan Muhammad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The Diffusion Coefficient of Scandium in Dilute Aluminum-Scandium Alloys
Marcel A. Kerkove et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Effect of temperature-induced solute distribution on stacking fault energy in Mg-X(X = Li, Cu, Zn, Al, Y and Zr) solid solution: a first-principles study
Touwen Fan et al.
PHILOSOPHICAL MAGAZINE (2014)
Microstructure, hardness and tensile properties of A380 aluminum alloy with and without Li additions
Mostafa Karamouz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effects of samarium addition on microstructure and mechanical properties of as-cast Al-Si-Cu alloy
Zhi Hu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Ultrastrong Mg Alloy via Nano-spaced Stacking Faults
W. W. Jian et al.
MATERIALS RESEARCH LETTERS (2013)
The role of strontium in modifying aluminium-silicon alloys
M. Timpel et al.
ACTA MATERIALIA (2012)
Effects of rare earth Er additions on microstructure development and mechanical properties of die-cast ADC12 aluminum alloy
Xiaowu Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Modification effect of Sr on the microstructures and mechanical properties of Al-10.5Si-2.0Cu recycled alloy for die casting
Sang-Soo Shin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
First principles calculations of the Sc adsorption on Si(001)-c(2 x 4)
M. T. Romero et al.
SURFACE SCIENCE (2012)
Si phase morphology and mechanical properties of ZL107 Al alloy improved by La modification and heat treatment
Wan Di-qing
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
On influence of Ti and Sr on microstructure, mechanical properties and quality index of cast eutectic Al-Si-Mg alloy
Sergio Haro-Rodriguez et al.
MATERIALS & DESIGN (2011)
Microstructural investigation of Sr-modified Al-15 wt%Si alloys in the range from micrometer to atomic scale
M. Timpel et al.
ULTRAMICROSCOPY (2011)
Effect of ultrasonic treatment on the Fe-intermetallic phases in ADC12 die cast alloy
W. Khalifa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
The role of stacking faults and twin boundaries in grain refinement of a Cu-Zn alloy processed by high-pressure torsion
Y. B. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
The influence of Cr content on the microstructure and mechanical properties of AlSi9Cu3(Fe) die-casting alloys
Giulio Timelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effects of eutectic modification and T4 heat treatment on mechanical properties and corrosion resistance of an Al-9 wt% Si casting alloy
Wislei R. Osorio et al.
MATERIALS CHEMISTRY AND PHYSICS (2007)
Effects of substituting rare-earth elements for scandium in a precipitation-strengthened Al-0.08 at. %Sc alloy
Richard A. Karnesky et al.
SCRIPTA MATERIALIA (2006)
Loss in coherency and coarsening behavior of Al3Sc precipitates
S Iwamura et al.
ACTA MATERIALIA (2004)
Correlation between mechanical properties and amount of dendritic α-Al phase in as-cast near-eutectic Al-11.6% Si alloys modified with strontium
HC Liao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys
EA Marquis et al.
ACTA MATERIALIA (2001)