Microstructure and properties of laser-clad high entropy alloy coating on Inconel 718 alloy

In this study, CoCrFeNiMo0.2 high entropy alloy coating (average thickness of 990 mu m) without defects was successfully prepared on the Inconel 718 substrate by laser cladding. Microstructure and properties were investigated systematically by multiple characterization methods. The EDS and ECC find that the coating has good metallurgical bonding with the substrate. The thermal erosion test indicates that the formation of a passive film with Cr and Mo elements improves the thermal erosion resistance of the coating. According to the results of microhardness tests, the average microhardness in the coating is about 328.9 HV (1.28 times of the substrate). The coating with low wear width (0.454 mm) and depth (7.085 mu m) shows outstanding wear resistance due to the formation of the a phase particles and the fine-grain strengthening. The coating surface's average residual stress is -723.3 MPa (compressive stress), which prevents crack generation. Furthermore, the corrosion resistance of the coating is obviously improved.

Automated summary

In this study, a defect-free CoCrFeNiMo0.2 high entropy alloy coating with an average thickness of 990 μm was successfully prepared on an Inconel 718 substrate by laser cladding. The coating exhibited good metallurgical bonding with the substrate, improved thermal erosion resistance, outstanding wear resistance, and enhanced corrosion resistance.