☆ 4.5 Article

Experimental and numerical analysis of different natural fiber polymer composite

MATERIALS AND MANUFACTURING PROCESSES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Waste and natural fiber based automotive brake composite materials: Influence of slag and coir on tribological performance

R. Rajan et al.

Summary: The study found that as the slag waste content decreased and coir fiber content increased, the density, hardness, strength, etc. of the friction composite materials showed a decreasing trend, while porosity and compressibility showed an increasing trend. At the same time, the friction materials mixed in different combinations showed differences in friction, degradation, recovery, and wear performance.

POLYMER COMPOSITES (2022)

添加到收藏夹

Review Polymer Science

A Review on Natural Fibre-Reinforced Biopolymer Composites: Properties and Applications

S. Om Prakash et al.

Summary: This review paper provides an extensive overview and application evaluation of biodegradable polymer composites, emphasizing the importance of developing bio-composites with good performance and minimal environmental impact.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2022)

添加到收藏夹

Article Mechanics

Determination of the dynamic performance of natural viscoelastic composites with different proportions of reinforcing fibers

Sergei Shlykov et al.

Summary: The study found that increasing fiber fraction decreases the strength indicators but increases the damping factor at the glass transition temperature. The results also indicate a correlation between moduli and bending strength with increasing fiber fraction.

CURVED AND LAYERED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Chemical

Mechanical Properties of Polymer Composites Reinforced with Alkaline-Treated Natural Fibre

I. Paul Theophilus Rajakumar et al.

Summary: The mechanical characteristics of a high impact polyethylene composite reinforced with abaca fibre were studied. The study investigated the influence of different fibre loadings on tensile strength and Young's modulus. The results showed that a fibre loading of 55 percent significantly improved the mechanical properties compared to without fibre loading.

ADVANCES IN POLYMER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Hot-Plate welding behavior of Sisal and Jute Polypropylene composites

Kassahun Gashu Melese et al.

Summary: The recent global pandemic has led to a heightened concern and awareness about the importance of the environment, driving researchers to focus on developing technologies for sustainable community growth. Natural fiber-based composites are widely used in engineering applications, but for complex designs, assembly through joining of independently fabricated parts is necessary.

MATERIALS AND MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Polymer Science

Numerical and Experimental Analysis of Mechanical Properties of Natural-Fiber-Reinforced Hybrid Polymer Composites and the Effect on Matrix Material

Ayyappa Atmakuri et al.

Summary: The impact of matrix material on the mechanical properties of natural-fiber-reinforced hybrid composites was studied through experimental and numerical analysis. The results showed that the hybrid composites outperformed individual fiber composites, with epoxy resin matrix composites exhibiting superior properties to ecopoxy matrix composites.

POLYMERS (2022)

添加到收藏夹

Article Materials Science, Textiles

Influence of Mechanical Properties on Modal Analysis of Natural Fiber Reinforced Laminated Composite Trapezoidal Plates

D. R. Rajkumar et al.

Summary: This study focuses on the modal parameters of laminated composite plates made of natural fibers reinforced with unsaturated polyester resin. Different combinations of jute and ramie fibers were treated and analyzed for their physical, mechanical, and elastic properties. Using the obtained elastic properties, free undamped vibration analysis was conducted on trapezoidal plates with different boundary conditions to determine the natural frequency and mode shapes, which showed good agreement with existing literature.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

A Review on Natural Fiber Bio-Composites, Surface Modifications and Applications

Mohammed Zwawi

Summary: The focus on eco-friendly bio-composites has increased due to environmental concerns and global warming. Natural fibers are abundant, low-cost to harvest, and possess adequate mechanical properties, making them a viable alternative to synthetic fibers. Bio-composites are degradable, renewable, non-toxic, and have comparable properties to synthetic fiber composites, leading to their widespread use in industries such as construction, automotive, packaging, medicine, and cosmetics.

MOLECULES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Experimental evaluation of bamboo fiber/particulate coconut shell hybrid PVC composite

Adeolu A. Adediran et al.

Summary: The study involved incorporating bamboo fibers and particulate coconut shell into a PVC matrix to improve the mechanical properties of the composite material, resulting in enhanced strength and durability. However, thermal and electrical properties decreased with decreasing fiber content. An increase in hardness and wear loss index was observed with the intermix of coconut shell and bamboo fibers.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Characterization of a new natural fiber extracted from Corypha taliera fruit

Taslima Ahmed Tamanna et al.

Summary: This study focused on determining the characteristics of natural fibers extracted from the Corypha taliera fruit, as a potential alternative to harmful synthetic fibers. The investigation included physical, chemical, mechanical, thermal, and morphological characteristics of the CTF fibers. Results showed that the CTF fiber has high cellulose content, crystallinity, and good mechanical properties, making it a promising reinforcement material for fiber-reinforced composite materials.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Polymer Science

Experimental and Numerical Analyses on the Buckling Characteristics of Woven Flax/Epoxy Laminated Composite Plate under Axial Compression

Venkatachalam Gopalan et al.

Summary: This study investigates the buckling characteristics of a sustainable green composite in loadbearing structural applications through experimental and numerical methods, focusing on its behavior under axial compressive loads. By exploring the feasibility of using the green composite in various structural applications, the study highlights the potential for its widespread adoption as a sustainable alternative to synthetic composites.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Composites

Material-removing machining wastes as a filler of a polymer concrete (industrial chips as a filler of a polymer concrete)

Norbert Kepczak et al.

Summary: The study reveals that the addition of machining chips has a significant impact on the mechanical properties of polymer concrete, reducing its strength parameters by up to 30%. However, some chip waste can be used as a substitute for natural fillers without losing much of the strength parameters.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental study on preparation and mechanical characteristics of jute/silk/coco-peat reinforced with epoxy polymers

K. Raghavendra Pai et al.

Summary: The study is based on the concept of natural fiber composites, selecting natural fibers from different plant and animal sources for experimental evaluation of mechanical behavior. The resulting composite materials with different proportions exhibit varying mechanical properties.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Review Materials Science, Composites

Modified hemp fibers intended for fiber-reinforced polymer composites used in structural applications-A review. I. Methods of modification

Fulga Tanasa et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Materials Science, Composites

Machinability of hybrid natural fiber reinforced composites with cellulose micro filler incorporation

K. R. Sumesh et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Effect of self-treatment process on properties of natural fiber-reinforced geopolymer composites

Phattharachai Maichin et al.

MATERIALS AND MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Study on the effects of fibre volume percentage on banana-reinforced epoxy composite by finite element method

Upendra Sharan Gupta et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Viscoelastic and mechanical behaviour of reduced graphene oxide and zirconium dioxide filled jute/epoxy composites at different temperature conditions

P. A. Prasob et al.

MATERIALS TODAY COMMUNICATIONS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review

Yashas Gowda Thyavihalli Girijappa et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Automation & Control Systems

Sustainability of surface treatment of natural fibre in composite formation: challenges of environment-friendly option

Oludaisi Adekomaya et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Review Materials Science, Composites

A review on abaca fiber reinforced composites

Joefreim A. Delicano

COMPOSITE INTERFACES (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Review of natural fiber composites

T. Rohan et al.

INTERNATIONAL CONFERENCE ON ADVANCES IN METALLURGY, MATERIALS AND MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Composites

A study on structural design and analysis of small wind turbine blade with natural fibre(flax) composite

Hyunbum Park

ADVANCED COMPOSITE MATERIALS (2016)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Effects of Alkaline Treatment and Fiber Length towards The Static and Dynamic Properties of Ijuk Fiber Strengthened-Epoxy Composite

I. G. N. Nitya Santhiarsa

PROCEEDINGS OF THE INTERNATIONAL MECHANICAL ENGINEERING AND ENGINEERING EDUCATION CONFERENCES (IMEEEC-2016) (2016)

添加到收藏夹

Article Engineering, Geological

On the use of the half-power bandwidth method to estimate damping in building structures

George A. Papagiannopoulos et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.