相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Advanced mechanical properties obtained via accurately tailoring stacking fault energy in Co-rich and Ni-depleted CoxCr33Ni67-x medium-entropy alloys
Dong Huang et al.
SCRIPTA MATERIALIA (2022)
Break the strength-ductility trade-off in a transformation-induced plasticity high-entropy alloy reinforced with precipitation strengthening
Dong Huang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Cryogenic mechanical behavior of a TRIP-assisted dual-phase high-entropy alloy
Dongyue Li et al.
NANO RESEARCH (2022)
Effects of carbon and molybdenum on the nanostructural evolution and strength/ductility trade-off in Fe40Mn40Co10Cr10 high-entropy alloys
Mohsen Saboktakin Rizi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Recovery of cold-worked Al0.3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation
S. Dasari et al.
ACTA MATERIALIA (2021)
Mechanisms for suppressing discontinuous precipitation and improving mechanical properties of NiAl-strengthened steels through nanoscale Cu partitioning
B. C. Zhou et al.
ACTA MATERIALIA (2021)
Enhancement of strength and ductility in non-equiatomic CoCrNi medium-entropy alloy at room temperature via transformation-induced plasticity
H. W. Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy
Mohsen Saboktakin Rizi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy
Ying Yang et al.
NATURE (2021)
Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy
Rui Feng et al.
NATURE COMMUNICATIONS (2021)
Stacking fault energy in concentrated alloys
Mulaine Shih et al.
NATURE COMMUNICATIONS (2021)
Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy
X. H. Du et al.
NATURE COMMUNICATIONS (2020)
Short-range order and its impact on the CrCoNi medium-entropy alloy
Ruopeng Zhang et al.
NATURE (2020)
Improvement of strength - ductility balance of B2-strengthened lightweight steel
J. H. Hwang et al.
ACTA MATERIALIA (2020)
Towards superior mechanical properties of hetero-structured high-entropy alloys via engineering multicomponent intermetallic nanoparticles
T. Yang et al.
SCRIPTA MATERIALIA (2020)
Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures
Kaisheng Ming et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae
Peijian Shi et al.
NATURE COMMUNICATIONS (2019)
Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys
Daixiu Wei et al.
SCRIPTA MATERIALIA (2019)
Transformation-reinforced high-entropy alloys with superior mechanical properties via tailoring stacking fault energy
S. F. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
High-entropy alloys
Easo P. George et al.
NATURE REVIEWS MATERIALS (2019)
Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy
Jing Su et al.
ACTA MATERIALIA (2019)
Fatigue behavior of ultrafine grained triplex Al0.3CoCrFeNi high entropy alloy
Kaimiao Liu et al.
SCRIPTA MATERIALIA (2019)
Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy
Deep Choudhuri et al.
MATERIALS RESEARCH LETTERS (2019)
Novel Co-rich high entropy alloys with superior tensile properties
Daixiu Wei et al.
MATERIALS RESEARCH LETTERS (2019)
Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds
Deep Choudhuri et al.
ACTA MATERIALIA (2019)
Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure
S. W. Wu et al.
ACTA MATERIALIA (2019)
Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy
C. E. Slone et al.
ACTA MATERIALIA (2018)
Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al0.1CoCrFeNi
X. D. Xu et al.
ACTA MATERIALIA (2018)
Superb strength and high plasticity in laves phase rich eutectic medium-entropy-alloy nanocomposites
Z. Y. Ding et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Three-Dimensional High-Entropy Alloy-Polymer Composite Nanolattices That Overcome the Strength-Recoverability Trade-off
Xuan Zhang et al.
NANO LETTERS (2018)
Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy
Deep Choudhuri et al.
MATERIALS RESEARCH LETTERS (2018)
Bidirectional Transformation Enables Hierarchical Nanolaminate Dual-Phase High-Entropy Alloys
Wenjun Lu et al.
ADVANCED MATERIALS (2018)
High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys
Yao-Jian Liang et al.
NATURE COMMUNICATIONS (2018)
Entropy contributions to phase stability in binary random solid solutions
Anus Manzoor et al.
NPJ COMPUTATIONAL MATERIALS (2018)
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
T. Yang et al.
SCIENCE (2018)
Deformation twinning behaviors of the low stacking fault energy high-entropy alloy: An in-situ TEM study
Jiabin Liu et al.
SCRIPTA MATERIALIA (2017)
Polymorphism in a high-entropy alloy
Fei Zhang et al.
NATURE COMMUNICATIONS (2017)
Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
Zijiao Zhang et al.
NATURE COMMUNICATIONS (2017)
Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite
Praveen Sathiyamoorthi et al.
MATERIALS & DESIGN (2017)
Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy
Y. L. Zhao et al.
ACTA MATERIALIA (2017)
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
J. Miao et al.
ACTA MATERIALIA (2017)
A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior
Zhiming Li et al.
ACTA MATERIALIA (2017)
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
G. Laplanche et al.
ACTA MATERIALIA (2017)
The fcc solid solution stability in the Co-Cr-Fe-Mn-Ni multi-component system
Guillaume Bracq et al.
ACTA MATERIALIA (2017)
Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility
X. L. Wu et al.
ACTA MATERIALIA (2016)
A precipitation-hardened high-entropy alloy with outstanding tensile properties
J. Y. He et al.
ACTA MATERIALIA (2016)
High-entropy alloy: challenges and prospects
Y. F. Ye et al.
MATERIALS TODAY (2016)
Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off
Zhiming Li et al.
NATURE (2016)
Ultrafine-Grained AlCoCrFeNi2.1 Eutectic High-Entropy Alloy
I. S. Wani et al.
MATERIALS RESEARCH LETTERS (2016)
Accelerated exploration of multi-principal element alloys with solid solution phases
O. N. Senkov et al.
NATURE COMMUNICATIONS (2015)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Evading the strength- ductility trade-off dilemma in steel through gradient hierarchical nanotwins
Yujie Wei et al.
NATURE COMMUNICATIONS (2014)
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
G. Liu et al.
NATURE MATERIALS (2013)
Development of L12-ordered Ni3(Al,Ti)-strengthened alumina-forming austenitic stainless steel alloys
Yukinori Yamamoto et al.
SCRIPTA MATERIALIA (2013)
Novel ultrahigh-strength nanolath martensitic steel by quenching-partitioning-tempering process
X. D. Wang et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating
PK Huang et al.
ADVANCED ENGINEERING MATERIALS (2004)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)