相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。The influence of chemistry on the interface toughness in a WTi-Cu system
Markus Alfreider et al.
ACTA MATERIALIA (2022)
Flaw-insensitive fracture of a micrometer-sized brittle metallic glass
Ruitao Qu et al.
ACTA MATERIALIA (2021)
Mode dependent evaluation of fracture behaviour using cantilever bending
Nidhin George Mathews et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
Thermal and oxidation stability of TixW1-x diffusion barriers investigated by soft and hard x-ray photoelectron spectroscopy
C. Kalha et al.
JOURNAL OF APPLIED PHYSICS (2021)
Perspectives on Advances in Quantum Dot Lasers and Integration with Si Photonic Integrated Circuits
Chen Shang et al.
ACS PHOTONICS (2021)
Origins of thin film delamination induced by electrodeposition and processing methods to overcome it
Longchang Ni et al.
THIN SOLID FILMS (2020)
Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: A case study on GaAs single crystals
J. Ast et al.
MATERIALS & DESIGN (2020)
Addressing Fracture Properties of Individual Constituents Within a Cu-WTi-SiOx-Si Multilayer
Markus Alfreider et al.
JOM (2020)
Temperature dependence of surface and grain boundary energies from first principles
Daniel Scheiber et al.
PHYSICAL REVIEW B (2020)
Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
Amy Wat et al.
NATURE COMMUNICATIONS (2019)
Dislocation dynamics in a nickel-based superalloy via in-situ transmission scanning electron microscopy
J. C. Stinville et al.
ACTA MATERIALIA (2019)
A new push-pull sample design for microscale mode 1 fracture toughness measurements under uniaxial tension
J. J. Schwiedrzik et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Transmission scanning electron microscopy: Defect observations and image simulations
Patrick G. Callahan et al.
ULTRAMICROSCOPY (2018)
Assessment of Ductile, Brittle, and Fatigue Fractures of Metals Using Optical Coherence Tomography
Gheorghe Hutiu et al.
METALS (2018)
In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing
Markus Alfreider et al.
MATERIALS & DESIGN (2018)
Design and development of MEMS-based structures for in-situ characterization of thermo-mechanical behaviour of thin metal films
F. Saghaeian et al.
MICROELECTRONICS RELIABILITY (2018)
Fracture mechanics of micro samples: Fundamental considerations
R. Pippan et al.
MATERIALS & DESIGN (2018)
Understanding the extremely low fracture toughness of freestanding gold thin films by in-situ bulge testing in an AFM
Eva I. Preiss et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Buckle induced delamination techniques to measure the adhesion of metal dielectric interfaces
A. Kleinbichler et al.
MICROELECTRONIC ENGINEERING (2017)
In situ stable crack growth at the micron scale
Giorgio Sernicola et al.
NATURE COMMUNICATIONS (2017)
Selective interface toughness measurements of layered thin films
R. Konetschnik et al.
AIP ADVANCES (2017)
Fracture toughness evaluation of NiAl single crystals by microcantilevers-a new continuous J-integral method
Johannes Ast et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Advanced characterisation of thermo-mechanical fatigue mechanisms of different copper film systems for wafer metallizations
Stephan Bigl et al.
THIN SOLID FILMS (2016)
Failure mechanisms of single-crystal silicon electrodes in lithium-ion batteries
Feifei Shi et al.
NATURE COMMUNICATIONS (2016)
Importance of dislocation pile-ups on the mechanical properties and the Bauschinger effect in microcantilevers
M. W. Kapp et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Nanofabrication by electron beam lithography and its applications: A review
Yifang Chen
MICROELECTRONIC ENGINEERING (2015)
Calculations of electron inelastic mean free paths. X. Data for 41 elemental solids over the 50 eV to 200 keV range with the relativistic full Penn algorithm (Vol 47, pg 207, 2015)
H. Shinotsuka et al.
SURFACE AND INTERFACE ANALYSIS (2015)
Bioinspired structural materials
Ulrike G. K. Wegst et al.
NATURE MATERIALS (2015)
A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings
M. Sebastiani et al.
PHILOSOPHICAL MAGAZINE (2015)
Temperature dependent transition of intragranular plastic to intergranular brittle failure in electrodeposited Cu micro-tensile samples
A. Wimmer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Determining the fracture resistance of thin sheet fiber composites - Paper as a model material
J. Zechner et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Effect of organometallic clamp properties on the apparent diversity of tensile response of nanowires
Kathryn F. Murphy et al.
NANOTECHNOLOGY (2013)
Delamination resistance of thermal barrier coatings containing embedded ductile layers
Matthew R. Begley et al.
ACTA MATERIALIA (2012)
Source-based strengthening of sub-micrometer Al fibers
Frederic Mompiou et al.
ACTA MATERIALIA (2012)
A comprehensive study on the damage tolerance of ultrafine-grained copper
A. Hohenwarter et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimens
Stefan Wurster et al.
PHILOSOPHICAL MAGAZINE (2012)
A novel approach for determining fracture toughness of hard coatings on the micrometer scale
A. Riedl et al.
SCRIPTA MATERIALIA (2012)
Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending
J. Schaufler et al.
THIN SOLID FILMS (2012)
Size effect on fracture toughness of freestanding copper nano-films
Hiroyuki Hirakata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A reliable technology concept for active power cycling to extreme temperatures
M. Nelhiebel et al.
MICROELECTRONICS RELIABILITY (2011)
In situ TEM study of microplasticity and Bauschinger effect in nanocrystalline metals
Jagannathan Rajagopalan et al.
ACTA MATERIALIA (2010)
Mechanical and microstructural single-crystal Bauschinger effects: Observation of reversible plasticity in copper during bending
Eralp Demir et al.
ACTA MATERIALIA (2010)
What is the Young's Modulus of Silicon?
Matthew A. Hopcroft et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2010)
Micro-compression testing of fcc metals: A selected overview of experiments and simulations
Michael D. Uchic et al.
JOM (2009)
Measuring anisotropy in Young's modulus of copper using microcantilever testing
David E. J. Armstrong et al.
JOURNAL OF MATERIALS RESEARCH (2009)
New On-Chip Nanomechanical Testing Laboratory - Applications to Aluminum and Polysilicon Thin Films
Sebastien Gravier et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2009)
A universal scaling law for the strength of metal micropillars and nanowires
R. Dou et al.
SCRIPTA MATERIALIA (2009)
Interface fracture properties of thin films studied by using the micro-cantilever deflection technique
Kurt Matoy et al.
SURFACE & COATINGS TECHNOLOGY (2009)
A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples
D. Kiener et al.
ACTA MATERIALIA (2008)
Adhesion and interfacial fracture toughness between hard and soft materials
Nima Rahbar et al.
JOURNAL OF APPLIED PHYSICS (2008)
An investigation of adhesion in drug-eluting stent layers
Kurt V. Wolf et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
On determination of mode II fracture toughness using semi-circular bend specimen
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique
C Motz et al.
ACTA MATERIALIA (2005)
On the fracture behavior of inhomogeneous materials - A case study for elastically inhomogeneous bimaterials
O Kolednik et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
The cohesive zone model: advantages, limitations and challenges
M Elices et al.
ENGINEERING FRACTURE MECHANICS (2002)
Characterisation of ductile mixed-mode fracture with the crack-tip displacement vector
A Pirondi et al.
ENGINEERING FRACTURE MECHANICS (2001)
Continuum simulations of directional dependence of crack growth along a copper/sapphire bicrystal interface. Part II: crack tip stress/deformation analysis
JW Kysar
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Directional dependence of fracture in copper/sapphire bicrystal
JW Kysar
ACTA MATERIALIA (2000)
The yield stress gradient effect in inhomogeneous materials
O Kolednik
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)
分享论文
