☆ 4.7 Article

Mn content optimum on microstructures and mechanical behavior of Fe-based medium entropy alloys

MATERIALS & DESIGN (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Effect of Co on phase stability and mechanical behavior of CoxCrFeNiMnAl0.3 high entropy alloys with micro/nano hierarchical structure

Guannan Zhang et al.

Summary: This study investigated the effects of Co content on the phase stability and mechanical behavior of CoxCrFeNiMnAl0.3 HEAs. The decrease in Co content resulted in the precipitation of the BCC phase from the FCC phase, forming a dual-phase structure. The precipitated BCC phase effectively suppressed grain growth and recrystallization, leading to the formation of an ultrafine-grained microstructure. In addition, the formation of the Ni-Al type nano-B2 phase in the BCC phase improved the mechanical properties of the alloys.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of Cu addition in enhancing strength-ductility synergy in transforming high entropy alloy

Priyanka Agrawal et al.

Summary: This research focuses on tailoring the metastability of transformation induced plasticity high entropy alloys (TRIP HEAs) through alloying and processing to improve their mechanical properties. The addition of Cu enhances the ductility and stacking fault energy of the alloy, resulting in improved strength and work hardening. Furthermore, friction stir processing (FSP) is employed to refine the microstructure and enhance the TRIP effect, leading to advanced properties compared to the original as-cast alloy.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dynamic tension and constitutive model in Fe40Mn20Cr20Ni20 high-entropy alloys with a heterogeneous structure

Y. Z. Wang et al.

Summary: Face-centered-cubic (FCC) Fe40Mn20Cr20Ni20 high-entropy alloys (HEAs) were fabricated by industrialized vacuum-induction melting and formed a heterogenous structure consisting of a phase distribution and grain size after thermomechanical treatments. Under dynamic tension, the alloy showed simultaneous enhancements in strength and ductility due to the activation of multiple strengthening mechanisms. This study provides new insights for developing high-performance HEAs to resist dynamic impacts.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancement of strength-ductility balance of heavy Ti and Al alloyed FeCoNiCr high-entropy alloys via boron doping

Yongliang Qi et al.

Summary: By doping extremely little boron into heavy precipitation-hardened high-entropy alloys, the original microstructure can be significantly improved, leading to enhanced tensile ductility and comparable or even better ultimate tensile strength.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quantifying internal strains, stresses, and dislocation density in additively manufactured AlSi10Mg during loading-unloading-reloading deformation

X. X. Zhang et al.

Summary: In-situ neutron diffraction was used to investigate the residual strains, stresses, and dislocation density in LPBF AlSi10Mg during loading-unloading-reloading deformation. The study revealed that the AlSi10Mg alloy exhibits notable dislocation annihilation phenomenon in the Al matrix during unloading stages, driven by compressive residual stresses.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation-induced martensitic transformation in AISI304 by cryogenic machining

Lara Vivian Fricke et al.

Summary: By lowering the machining temperature, martensitic transformation can be achieved in steel grains independently of the Schmid factor. At higher temperatures, grains with higher Schmid factor are more likely to transform into martensite. Therefore, during the machining process, choosing the appropriate temperature or performing texture treatment can promote martensitic transformation.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation

Hamed Shahmir et al.

Summary: High-pressure torsion on an equiatomic CoCrFeNiMn high entropy alloy at room and cryogenic temperatures induces FCC to HCP and BCC martensitic transformations, effectively strengthening the alloy through increasing straining and decreasing deformation temperature. This transformation plays a significant role in altering the mechanical properties of the alloy under different deformation conditions.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

X-ray diffraction analysis of kaolin M1 and M2 via the Williamson-Hall and Warren-Averbach methods

Lalmi Khier et al.

Summary: X-ray diffraction studies show that the main phase mullite in different sintered kaolins is free from internal microstrains, which contributes significantly to its mechanical resistance at high temperatures.

JOURNAL OF CHEMICAL RESEARCH (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation behavior of a Co-Cr-Fe-Ni-Mo medium-entropy alloy at extremely low temperatures

Jongun Moon et al.

Summary: The medium-entropy alloy Co17.5Cr12.5Fe55Ni10Mo5 demonstrates excellent mechanical properties at cryogenic temperatures, showing high strength, ductility, and strain hardening. It exhibits several unusual features within the extremely low temperature range of 0.5-4.2 K, including anomalies in the temperature dependence of yield strength and tensile ductility, discontinuous plastic deformation (DPF), and changes in deformation-induced martensitic transformation tendency. The observed phenomena may be interrelated and require further investigation.

MATERIALS TODAY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys

Peijian Shi et al.

Summary: The study demonstrates a directionally solidified eutectic high-entropy alloy with a hierarchically organized herringbone structure that reconciles crack tolerance and high elongation. The self-buffering herringbone material achieves an ultrahigh uniform tensile elongation while maintaining strength.

SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Gradient cell-structured high-entropy alloy with exceptional strength and ductility

Qingsong Pan et al.

Summary: By introducing gradient nanoscaled dislocation cell structures in stable single-phase HEAs, enhanced strength can be achieved without apparent loss of ductility. The gradient structure induces the formation of high-density tiny stacking faults and twins, contributing to improved plasticity, increased strength, and work hardening.

SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Martensitic transformation induced dislocation walls in Fe42Mn38Co10Cr10 high-entropy alloy

L. Qi et al.

Summary: This study characterized two types of previously unreported dislocation walls in a high-entropy alloy, showing the importance of these structures in strain hardening and plastic accommodation. The walls are constituted by specific types of partial dislocations and play a significant role in dislocation-interface interactions.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Real-time observations of TRIP-induced ultrahigh strain hardening in a dual-phase CrMnFeCoNi high-entropy alloy

Sijing Chen et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructurally flexible high entropy alloys: Linkages between alloy design and deformation behavior

S. S. Nene et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys

Daixiu Wei et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Experimental determination of the driving force of the fcc-hcp martensitic transformation and the stacking fault energy in high-Mn Fe-Mn-Cr steels

L. M. Guerrero et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures

Junpeng Liu et al.

SCIENCE CHINA-MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures

Y. Tong et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Nanoscale serration and creep characteristics of Al0.5CoCrCuFeNi high-entropy alloys

Shuying Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bidirectional Transformation Enables Hierarchical Nanolaminate Dual-Phase High-Entropy Alloys

Wenjun Lu et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

High dislocation density-induced large ductility in deformed and partitioned steels

B. B. He et al.

SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior

Zhiming Li et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of dislocations and twins in a strong and ductile nanotwinned steel

P. Zhou et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys

Zhangwei Wang et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the role of dislocation characters influencing ratcheting deformation of austenitic stainless steel

Krishna Dutta et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off

Zhiming Li et al.

NATURE (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

The respective hardening contributions of dislocations and twins to the flow stress of a twinning-induced plasticity steel

Z. Y. Liang et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A hexagonal close-packed high-entropy alloy: The effect of entropy

Y. J. Zhao et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi

ZiJiao Zhang et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

J. Y. He et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation mechanisms of a 20Mn TWIP steel investigated by in situ neutron diffraction and TEM

Y. F. Shen et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of the dislocation density and dislocation character in cold rolled Type 304 steel determined by profile analysis of X-ray diffraction

Takashi Shintani et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate

S. Curtze et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Chemistry, Physical

Refractory high-entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of internal stresses in a TWIP steel analyzing transient and permanent softening during reverse shear tests

I. Gutierrez-Urrutia et al.

JOURNAL OF MATERIALS SCIENCE (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel

A. Dumay et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Physics, Applied

Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties

Y. J. Zhou et al.

APPLIED PHYSICS LETTERS (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Densities and character of dislocations and size-distribution of subgrains in deformed metals by X-ray diffraction profile analysis

T Ungár et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

添加到收藏夹

Article Nanoscience & Nanotechnology

The density and the character of dislocations in cubic and hexagonal polycrystals determined by X-ray diffraction

J Gubicza et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.