☆ 4.6 Article

The exact closed-form equations for optimal design parameters of enhanced inerter-based isolation systems

JOURNAL OF VIBRATION AND CONTROL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Civil

Optimal Design of Inertial Amplifier Base Isolators for Dynamic Response Control of Multi-Storey Buildings

Sudip Chowdhury et al.

Summary: This paper studies the optimal design of inertial amplifier base isolators (IABI) for mitigating the dynamic response of multi-storey buildings under base excitations. The H-2 optimization method is used to obtain closed-form expressions for the optimal design parameters of IABI. The effectiveness of these expressions is evaluated by comparing the frequency and time domain responses of isolated structures to those of uncontrolled structures. The results show that the response reduction capacity of the optimal inertial amplifier base isolator is increased by 50% to 60% compared to traditional base isolators.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

The optimal design of dynamic systems with negative stiffness inertial amplifier tuned mass dampers

Sudip Chowdhury et al.

Summary: This paper introduces the negative stiffness inertial amplifier tuned mass dampers (NSIA-TMD) and its two novel variants, as well as the nonlinear negative stiffness inertial amplifier tuned mass dampers (NNSIA-TMD). The optimized system parameters and dynamic response reduction capacities of these dampers are obtained and compared with traditional tuned mass dampers.

APPLIED MATHEMATICAL MODELLING (2023)

添加到收藏夹

Article Engineering, Aerospace

Lightweight origami isolators with deployable mechanism and quasi-zero-stiffness property

Hesheng Han et al.

Summary: This paper proposes a lightweight nonlinear vibration isolator with a deployable mechanism and quasi-zero-stiffness property using Kresling origami modules. The quasi-zero-stiffness property is achieved by utilizing the supercritical pitchfork bifurcation, and the automatic deployment mechanism and folding conditions are investigated. The dynamic model and parametric studies demonstrate the excellent vibration isolation performance of the proposed isolator for aerospace applications.

AEROSPACE SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Civil

Development of a three-directional vibration isolator for buildings subject to metro- and earthquake-induced vibrations

Tao Sheng et al.

Summary: A new three-directional vibration isolator for buildings has been developed to suppress both vertical metro vibrations and horizontal seismic vibrations simultaneously. The isolator has adjustable stiffness and shows good performance in suppressing vibrations.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Adaptive parameter identification of Bouc-wen hysteresis model for a vibration system using magnetorheological elastomer

Xuan Bao Nguyen et al.

Summary: The Bouc-wen hysteresis model is commonly used in designing systems with magnetorheological materials, but the model parameters are difficult to determine. A novel adaptive parameter identification method was proposed in this study, successfully determining the model parameters and demonstrating robust performance in capturing material characteristics and determining parameters for nonlinear vibration structures. This method provides fast convergence and simple calculations for designing vibration control systems with uncertain parameters and hysteretic state.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

The exact closed-form expressions for optimal design parameters of resonating base isolators

Sudip Chowdhury et al.

Summary: This paper derives the optimal design parameters for two different base isolation configurations, grounded and ungrounded, using H2 and H-infinity optimization methods. The performance of these isolators is compared through frequency domain and time history analysis, showing that grounded isolators have significant advantages. The results demonstrate the mathematical accuracy and feasibility of the proposed isolators for practical design purposes.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Optimal negative stiffness inertial-amplifier-base-isolators: Exact closed-form expressions

S. Chowdhury et al.

Summary: This paper introduces the concept of negative stiffness inertial-amplifier-base-isolators and presents three physically different novel isolators achieved by tuning a single system parameter. The optimal system parameters for the novel isolators have been derived analytically using optimization methods. Results show that the novel isolators have significantly higher vibration reduction capacity compared to traditional base isolators.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Acoustics

Stability and performance of supercritical inerter-based active vibration isolation systems

D. Cakmak et al.

Summary: This paper presents an analytical study on stability and performance of supercritical linear active vibration isolation systems, showing that including an optimized inerter in the isolator can introduce instabilities in an otherwise unconditionally stable active system and deteriorate isolator performance. By serial dashpot/inerter arrangement and simultaneous optimization, improved performance may be achieved.

JOURNAL OF SOUND AND VIBRATION (2022)

添加到收藏夹

Article Acoustics

Optimal design of inerter-based isolators minimizing the compliance and mobility transfer function versus harmonic and random ground acceleration excitation

Marcial Baduidana et al.

Summary: This study investigates the analysis and optimization of inerter-based systems, focusing on the H(infinity) optimum parameters of inerter-based isolators to minimize compliance and mobility transfer functions under harmonic ground acceleration excitation. The results show significant improvements in compliance and mobility transfer functions compared to traditional dynamic vibration absorbers, especially in series-parallel inerter systems. This study provides a theoretical basis for designing optimal inerter-based isolators in engineering applications.

JOURNAL OF VIBRATION AND CONTROL (2021)

添加到收藏夹

Article Engineering, Mechanical

Inertial amplification band-gap generation by coupling a levered mass with a locally resonant mass

Arnab Banerjee et al.

Summary: In this study, a unique mechanical mechanism is demonstrated for shaping inertially-amplified band gaps, showcasing a double-attenuation phenomenon achieved through modal coupling. This provides a new approach for controlling band gaps in phononic media.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

An innovative quasi-zero stiffness isolator with three pairs of oblique springs

Feng Zhao et al.

Summary: This paper introduces an innovative design of quasi-zero stiffness isolator with three pairs of oblique springs, optimizing for lower transmissibility and wider QZS region. The design is validated through static and dynamic analyses, showing improved performance compared to traditional isolators.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Civil

Enhanced seismic base isolation using inertial amplifiers

Sudip Chowdhury et al.

Summary: The study introduces a new type of inertial amplifier coupled base isolator, comparing its seismic performance in reducing story drift and base shear with traditional isolators and inerter-based isolation systems. Results show that the inertial amplifier coupled isolator demonstrates superior performance and response reduction capacity.

STRUCTURES (2021)

添加到收藏夹

Article Engineering, Geological

Experimental evaluation of extra-stroke displacement capacity for Curved Surface Slider devices

Marco Furinghetti et al.

Summary: Curved Surface Slider devices are commonly used for reducing seismic vulnerability, but recent studies show that base isolated systems may have higher seismic risk compared to fixed-base systems. This unexpected outcome is partly attributed to the stricter collapse condition traditionally adopted for base isolated structures.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Assessment of the vertical stiffness of elastomeric bearing due to displacement and rotation

Ehsan Kazeminezhad et al.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simultaneous energy harvesting and vibration attenuation in piezo-embedded negative stiffness metamaterial

Ankur Dwivedi et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Realization of an ultrawide stop band in a 2-D elastic metamaterial with topologically optimized inertial amplification mechanisms

Osman Yuksel et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

添加到收藏夹

Article Acoustics

Enhanced tuned mass damper using an inertial amplification mechanism

Zhibao Cheng et al.

JOURNAL OF SOUND AND VIBRATION (2020)

添加到收藏夹

Article Construction & Building Technology

Experimental Assessment of the Seismic Response of a Base-Isolated Building Through a Hybrid Simulation Technique

Marco Furinghetti et al.

FRONTIERS IN BUILT ENVIRONMENT (2020)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Waves in Structured Mediums or Metamaterials: A Review

Arnab Banerjee et al.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2019)

添加到收藏夹

Article Engineering, Civil

Development and experimental behavior of HDR seismic isolators for low-rise residential buildings

Ingrid E. Madera Sierra et al.

ENGINEERING STRUCTURES (2019)

添加到收藏夹

Article Engineering, Geological

Experimental investigation of the cyclic response of double curved surface sliders subjected to radial and bidirectional sliding motions

Marco Furinghetti et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2019)

添加到收藏夹

Article Construction & Building Technology

Effects of the long-term behaviour of isolation devices on the seismic response of base-isolated buildings

Fabio Mazza

STRUCTURAL CONTROL & HEALTH MONITORING (2019)

添加到收藏夹

Article Construction & Building Technology

Exact H2 optimal solutions to inerter-based isolation systems for building structures

Hongxin Sun et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2019)

添加到收藏夹

Article Engineering, Aerospace

Control of Landing Efficiency of an Aircraft Landing Gear System With Magnetorheological Dampers

Chulhee Han et al.

JOURNAL OF AIRCRAFT (2019)

添加到收藏夹

Article Engineering, Civil

Optimal tuned inerter dampers for performance enhancement of vibration isolation

Feng Qian et al.

ENGINEERING STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

On the dynamics of a vibration isolator with geometrically nonlinear inerter

Fernando de Haro Moraes et al.

NONLINEAR DYNAMICS (2018)

添加到收藏夹

Article Engineering, Geological

Comparison of different models for high damping rubber bearings in seismically isolated bridges

E. Tubaldi et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

Soil-dependent optimum design of a new passive vibration control system combining seismic base isolation with tuned inerter damper

D. De Domenico et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2018)

添加到收藏夹

Article Engineering, Civil

Performance evaluation of existing isolated buildings with supplemental passive pseudo-negative stiffness devices

Meng Wang et al.

ENGINEERING STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

An enhanced base isolation system equipped with optimal tuned mass damper inerter (TMDI)

Dario De Domenico et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Integrated semi-active seat suspension for both longitudinal and vertical vibration isolation

Xian-Xu Bai et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2017)

添加到收藏夹

Article Construction & Building Technology

Simplified Model and Energy Dissipation Characteristics of a Rectangular Liquid-Storage Structure Controlled with Sliding Base Isolation and Displacement-Limiting Devices

Xuansheng Cheng et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2017)

添加到收藏夹

Article Acoustics

Design and experiment of a high-static-low-dynamic stiffness isolator using a negative stiffness magnetic spring

Yisheng Zheng et al.

JOURNAL OF SOUND AND VIBRATION (2016)

添加到收藏夹

Article Acoustics

On the analysis of a high-static-low-dynamic stiffness vibration isolator with time-delayed cubic displacement feedback

Chun Cheng et al.

JOURNAL OF SOUND AND VIBRATION (2016)

添加到收藏夹

Article Engineering, Mechanical

Analysis on nonlinear stiffness and vibration isolation performance of scissor-like structure with full types

Wei Zhang et al.

NONLINEAR DYNAMICS (2016)

添加到收藏夹

Article Engineering, Mechanical

Performance evaluation for inerter-based dynamic vibration absorbers

Yinlong Hu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

添加到收藏夹

Article Acoustics

A vibro-acoustic reduced order model using undeformed coupling interface substructuring - Application to rubber bushing isolation in vehicle suspension systems

Eskil Lindberg et al.

APPLIED ACOUSTICS (2014)

添加到收藏夹

Article Acoustics

Vibration isolation characteristics of a nonlinear isolator using Euler buckled beam as negative stiffness corrector: A theoretical and experimental study

Xiuchang Huang et al.

JOURNAL OF SOUND AND VIBRATION (2014)

添加到收藏夹

Article Acoustics

Analytical and Experimental Investigation of Buckled Beams as Negative Stiffness Elements for Passive Vibration and Shock Isolation Systems

Benjamin A. Fulcher et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2014)

添加到收藏夹

Article Instruments & Instrumentation

Semi-active variable stiffness vibration control of vehicle seat suspension using an MR elastomer isolator

Haiping Du et al.

SMART MATERIALS AND STRUCTURES (2011)

添加到收藏夹

Article Engineering, Mechanical

A hybrid electromagnetic shock absorber for active vehicle suspension systems

Babak Ebrahimi et al.

VEHICLE SYSTEM DYNAMICS (2011)

添加到收藏夹

Article Physics, Multidisciplinary

Theory of phononic gaps induced by inertial amplification in finite structures

C. Yilmaz et al.

PHYSICS LETTERS A (2010)

添加到收藏夹

Article Engineering, Geological

Parametric analysis of liquid storage tanks base isolated by curved surface sliding bearings

Emre Abali et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phononic band gaps induced by inertial amplification in periodic media

C. Yilmaz et al.

PHYSICAL REVIEW B (2007)

添加到收藏夹

Article Acoustics

Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2007)

添加到收藏夹

Article Construction & Building Technology

Negative stiffness friction damping for seismically isolated structures

Hirokazu Iemura et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2006)

添加到收藏夹

Article Construction & Building Technology

Computational numerical models for seismic response of structures isolated by sliding systems

RS Jangid

STRUCTURAL CONTROL & HEALTH MONITORING (2005)

添加到收藏夹

Article Engineering, Civil

Optimum friction pendulum system for near-fault motions

RS Jangid

ENGINEERING STRUCTURES (2005)

添加到收藏夹

Article Engineering, Mechanical

Performance benefits in passive vehicle suspensions employing inerters

MC Smith et al.

VEHICLE SYSTEM DYNAMICS (2004)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Response of pure-friction sliding structures to three components of earthquake excitation

H Shakib et al.

COMPUTERS & STRUCTURES (2003)

添加到收藏夹

Article Multidisciplinary Sciences

Extreme damping in composite materials with negative-stiffness inclusions

RS Lakes et al.

NATURE (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.