☆ 4.0 Article

Optical and electrical properties of copper alumina nanoparticles reinforced chlorinated polyethylene composites for optoelectronic devices

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Synthesis, characterization, magnetoelectric properties and gas sensing application of Poly(anthranilic acid-co-indole)/ magnetite nanocomposites

P. Jayakrishnan et al.

Summary: The present study investigates the properties of nanocomposites of Poly (Anthranilic acid-co-indole)/(PANA-Co-PIN) and magnetite nanoparticles (Fe3O4) prepared via one-step polymerization method. The results demonstrate that the addition of nanoparticles enhances the thermal stability, electrical conductivity, dielectric properties, and ammonia gas sensing performance of the composites, making them promising candidates for nanoelectronic devices.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

添加到收藏夹

Article Chemistry, Applied

Role of copper alumina nanoparticles on the performance of polyvinylchloride nanocomposites

S. Suvarna et al.

Summary: Poly(vinyl chloride) (PVC) nanocomposites with different contents of copper alumina (Cu-Al2O3) nanoparticles were prepared and their structural, thermal, electrical, contact angle, and mechanical properties were thoroughly examined. The presence of Cu-Al2O3 nanoparticles in the PVC matrix was confirmed using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis showed a higher crystallinity of the nanocomposites. SEM images revealed a change in the surface morphology of PVC due to the inclusion of nanofillers. DSC analysis showed an increase in the glass transition temperature with an increase in nanoparticle loading. The inclusion of nanofillers also improved the electrical properties, with the composite containing 7 wt.% sample showing the maximum conductivity and dielectric constant. The mechanical properties of the PVC nanocomposites, including modulus, tensile strength, hardness, and impact properties, were significantly enhanced by the reinforcement of nanoparticles. The highest mechanical and electrical properties were observed for the 7 wt.% Cu-Al2O3 loaded nanocomposite. Contact angle measurements indicated that the addition of Cu-Al2O3 nanofillers increased the hydrophobicity of the polymer matrix.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

添加到收藏夹

Article Polymer Science

Development of conductive poly (para-aminophenol)/zinc oxide nanocomposites for optoelectronic devices

Furhan et al.

Summary: The use of ZnO-reinforced poly(para-aminophenol) (PpAP) as a novel nanocomposite material has shown superior optical properties and electrical conductivities, making it highly desirable for optoelectronic device fabrication. Experimental characterization of the material's structure and properties reveals that the addition of ZnO nanoparticles affects the optical bandgap energy, refractive index, and dielectric properties of PpAP.

POLYMER BULLETIN (2023)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Synthesis, characterization, dielectric properties and gas sensing application of polythiophene/chitosan nanocomposites

K. Amruth et al.

Summary: This paper investigates the polymerization of thiophene monomer in the presence of chitosan nano-powders and analyzes the formation and properties of polythiophene/chitosan nanocomposites. The study confirms the chemical interaction between polythiophene and chitosan nano-powders, as well as the uniform positioning of chitosan in polythiophene. The nanocomposites exhibit improved electrical conductivity and gas sensing performance.

INORGANIC CHEMISTRY COMMUNICATIONS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of hybrid fillers on the mechanical behavior of polypropylene based hybrid composites

Ritika Sinha et al.

Summary: This study investigates the effect of hybrid fillers, such as graphene nanoplatelets (GnPs) and Titanium dioxide (TiO2), on the mechanical properties of polypropylene (PP) composites. The use of Maleic anhydride grafted polypropylene (MAPP) as a compatibilizing agent helps increase the adhesion between the matrix and fillers. The experimental design, based on orthogonal array and Taguchi methods, allows for the analysis of performance characteristics using a small set of experiments. The results suggest that the optimal parameters for maximum tensile modulus and strength are 3 wt% GnPs, 2 wt% TiO2, and 6 wt% MAPP. ANOVA analysis identifies GnPs as the most significant parameter for these properties, followed by TiO2 and MAPP.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Polymer Science

Flexible Conductive Nanocomposites for Electrochemical Devices Based on Chlorinated Natural Rubber/Nickel Oxide Nanoparticles

K. Parvathi et al.

Summary: This study investigated the structural, thermal, and temperature-dependent electrical properties of flexible conductive chlorinated natural rubber with various contents of nickel oxide nanoparticles. The addition of nanoparticles improved the thermal stability, dielectric properties, and AC electrical conductivity of the composites. The study emphasized the importance of interfacial interaction between the fillers and rubber chain for network formation.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Enhanced optical, thermal and electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites for flexible electrochemical devices

K. Parvathi et al.

Summary: This work investigates the optical, thermal stability, and temperature-dependent electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites. The insertion of zinc ferrite into the rubber matrix leads to a decrease in bandgap energy. The nanocomposites exhibit enhanced thermal stability and electrical properties compared to the parent polymer. Additionally, the conductivity of the nanocomposites shows a non-ohmic behavior, indicating a dynamic relaxation process. The experimental results are in good agreement with theoretical models, suggesting the presence of interfacial interactions in the nanocomposites. These findings are significant for the development of highly-durable flexible electronic devices, actuators, supercapacitors, and elastomeric pressure sensors.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Structural and electrical properties of Ca doped BiFeO3 multiferroic nanomaterials prepared by sol-gel auto-combustion method

G. M. Sravani et al.

Summary: Bi1-xCaxFeO3 multiferroic nanoparticles with rhombohedral structure and increasing grain boundaries were successfully synthesized using the Sol-gel auto combustion method. Their structural and electric properties were characterized by XRD patterns and cole-cole plots.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Optical and antibacterial activity of biogenic core-shell ZnO@TiO2 nanoparticles

K. Karthikeyan et al.

Summary: Inorganic nanocomposites, due to increased stability and safety, are gaining importance in wide range of engineering and medical applications. This study demonstrates the optical and antibacterial activity of core-shell ZnO@TiO2 nanoparticles synthesized via biogenic method.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thermal, mechanical and water barrier properties of graphene oxide/ polyvinyl alcohol/polyol composite films

Mithilesh Yadav et al.

Summary: The GO/PVA/PO composite films prepared by solution casting blend technique exhibit uniform dispersion of graphene oxide and excellent mechanical properties, making them suitable for food packaging applications.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Materials Science, Composites

Compliant materials based on nickel oxide/chlorinated natural rubber nanocomposites

K. Parvathi et al.

Summary: This research article focuses on the preparation of chlorinated natural rubber (Cl-NR)/nickel oxide (NiO) nanocomposites using a simple and environmentally friendly two-roll mill mixing technique. The study demonstrates that increasing the nanofiller content improves the crystallinity, dispersion, glass transition temperature, and mechanical properties of the nanocomposites. In addition, the nanocomposites show higher AC conductivity, dielectric loss, and dielectric constant compared to pure Cl-NR. The incorporation of the nanofiller also reduces the cure time, making the fabrication of rubber products more cost-effective. The study suggests that the nanocomposites with 5 phr NiO loading exhibit the best mechanical and electrical properties and can be used for the fabrication of electromagnetic induction shielding materials, conducting adhesives, and flame-resistant flexible electronic devices.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Studies of structure, dielectric and conduction mechanism of Bi3+/Yb3+ modified BaTiO3

Minakshi Padhy et al.

Summary: This study focuses on the structural, dielectric, electrical, and conduction properties of Bi3+/Yb3+ substituted BaTiO3. The modified BaTiO3 was synthesized by solid state reaction technique, and various properties such as capacitive, resistive, and conductive mechanisms were investigated over a wide temperature and frequency range.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hybrid polypyrrole/copper/graphene oxide nanocomposite films synthesized via potentiostatic deposition with enhanced photovoltaic properties

Augustine U. Agobi et al.

Summary: Novel ternary nanocomposites films of Polypyrrole/copper/graphene oxide (PPy/Cu/GO) with enhanced optical and electronic properties were successfully synthesized and characterized. The results showed that the nanocomposite films have good UV absorbance, and the energy band gap decreases with increasing GO load, making them suitable for photovoltaic applications.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Studies on optical properties, thermal stability and electrical conductivity of copper alumina nanoparticles-reinforced Poly(pyrrole-co-indole) for optoelectronic devices

S. Sankar et al.

Summary: This study investigated the impact of copper alumina (Cu-Al2O3) nanoparticles in poly(pyrrole-co-indole) (PPy-co-PIN) on various properties. The results showed that 5 wt% nanocomposite exhibited the best performance in terms of optical and electrical properties compared to the pristine material.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Copper alumina @ poly (aniline-co-indole) nanocomposites: synthesis, characterization, electrical properties and gas sensing applications

S. Sankar et al.

Summary: Poly(aniline-co-indole)/copper alumina (PANI-co-PIN/Cu-Al2O3) nanocomposites with excellent AC conductivity, dielectric properties, and gas sensing capabilities were synthesized via in situ chemical oxidative polymerization. The successful encapsulation of Cu-Al2O3 nanoparticles in the copolymer was confirmed, and the nanocomposites showed improved electrical and gas sensing properties.

RSC ADVANCES (2022)

添加到收藏夹

Article Polymer Science

Synthesis, Characterization, Thermal Properties and Temperature-Dependent AC Conductivity Studies of Poly (Butyl Methacrylate)/Neodymium Oxide Nanocomposites

K. Suhailath et al.

Summary: The addition of neodymium oxide nanoparticles enhanced the glass transition temperature and thermal degradation temperature of PBMA, while increasing the electrical conductivity of the nanocomposite. The experimental results demonstrated better compatibility between the components, and the activation energy and exponential values indicated that the system follows small polaron hopping mechanism.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Study of the influence of nanoparticles on the behavior of composite materials

Nora Chaibi et al.

Summary: The study indicates that MWCNT and SiO2 can effectively enhance the mechanical properties of epoxy resin when added at certain ratios, but performance degradation occurs beyond these ratios. MWCNT outperforms SiO2 in these nanocomposites. Empirical formulas were used to estimate critical stress intensity factors, with better results observed for SiO2 after fitting empirical models.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Electrical Properties of Lithium-Ion Conducting Poly (Vinylidene Fluoride-Co-Hexafluoropropylene) (PVDF-HFP)/Polyvinylpyrrolidone (PVP) Solid Polymer Electrolyte

K. Karpagavel et al.

Summary: The use of lithium bromide ionic salt dispersed with PVDF-HFP/PVP blend polymers has been studied for solid-state lithium batteries, with higher conducting samples following the Arrhenius relationship and ion transport mechanisms coinciding with the correlated barrier height (CBH) model. Conductivity based on dielectric constant obeys modified Arrhenius behavior and ionic diffusion is verified through tunneling mechanism.

JOURNAL OF ELECTRONIC MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Mechanistic understanding of growth of nanorods in microemulsions

Nitin Yadav et al.

Summary: One-dimensional nanostructures have attracted significant attention due to their wide range of applications, and microemulsion-based reaction schemes provide a versatile and successful method for synthesizing such structures. CTAB-based quaternary reverse micelles have been shown to be an effective soft template for synthesizing nanorods with tailored structural characteristics. The growth mechanism of nanorods within the polar core of CTAB RMs requires a symmetry-breaking mechanism to operate, resulting in directional growth along the longitudinal axis and the formation of anisotropic structures. The proposed microemulsion-based heterogeneous growth mechanism has been validated for both slow and relatively fast kinetics of nanorod synthesis.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Polymer Science

Characterization, Optical and Conductivity Study of Nickel Oxide Based Nanocomposites of Polystyrene

S. S. El-Khiyami et al.

Summary: In this study, different concentrations of nickel oxide (NiO) nanoparticles were successfully incorporated into a polystyrene (PS) polymer matrix using the solution casting method. Various characterization techniques were used to analyze the nanocomposites, revealing a strong interaction between PS and NiO nanoparticles. Increasing the nanofiller content improved the absorbance of the nanocomposites and raised the refractive index values, indicating potential applications in photonic devices and optical design. Moreover, the electrical conductivity of the nanocomposites was significantly enhanced due to the uniform dispersion of NiO nanoparticles and increasing content, achieving conduction through correlated barrier hopping (CBH).

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Transition metals Fe3+, Ni2+ modified titanium dioxide (TiO2) film sensors fabricated by CPT method to sense some toxic environmental pollutant gases

Ravindra Haribhau Waghchaure et al.

Summary: The study successfully synthesized undoped TiO2, Ni2+ doped TiO2, and Fe3+ doped TiO2 nanoparticles using a low-cost co-precipitation method, and designed thick film sensors. Various characterization techniques confirmed the structural and surface morphological properties of the prepared materials, with the Fe3+ doped TiO2 sensor showing advantage in specific surface area.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Photoluminescence, thermal and surface properties of triarylimidazole-containing polyimide nanocomposite films

Wu Bai et al.

Summary: In this study, transparent polyimide nanocomposite films were successfully prepared by introducing inorganic nanoparticles. The fluorescence intensity of the films increased with the content of inorganic nanoparticles, with the most significant improvement effect observed with nano-SiO2. The functional films exhibited high glass transition temperatures and excellent thermal stabilities, showing potential for optical applications.

RSC ADVANCES (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

High-Temperature Dielectric and Relaxation Behavior of Tantalum-Doped Sodium Bismuth Titanate-Barium Titanate Ceramics

Xiafeng He et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A conductive mechanism of PVA (Mowiol 10-98) filled with ZnO and MWCNT nanoparticles

N. B. Rithin Kumar et al.

BULLETIN OF MATERIALS SCIENCE (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

AC conductivity and dielectric characteristics of PVA/PVP nanocomposite filled with MWCNTs

E. M. Abdelrazek et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

添加到收藏夹

Article Polymer Science

Thermal, electrical, and dielectric properties of reduced graphene oxide-polyaniline nanotubes hybrid nanocomposites synthesized by in situ reduction and varying graphene oxide concentration

Madhabi Devi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of Nd Doping on Dielectric and Impedance Properties of PZT Nanoceramics

P. Kour et al.

JOURNAL OF ELECTRONIC MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanofiller-conjugated percolating conductive network modified polymerization reaction characteristics of aromatic thermosetting copolyester resin

Mete Bakir et al.

RSC ADVANCES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

An effective strategy to enhance mechanical, electrical, and electromagnetic shielding effectiveness of chlorinated polyethylene-carbon nanofiber nanocomposites

Subhadip Mondal et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Investigation of energy band gap in polymer/ZnO nanocomposites

Haider Mohammed Shanshool et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication and characterisation of copper-alumina nanocomposites prepared by high-energy fast milling

E. Salahi et al.

MATERIALS SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Composites

Embedded Eggshells as a Bio-Filler in Natural Rubber for Thermal Insulation Composite Foams

Nuchnapa Tangboribbon et al.

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Electric Modulus Powerful Tool for Analyzing Dielectric Behavior

Fuqiang Tian et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Accurate model for computing dielectric constant of dielectric nanocomposites

M. Ezzat et al.

APPLIED NANOSCIENCE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

In situ copper-alumina composites

C. Krueger et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Polymer Science

A Study on the Compatibility and Physical Properties of Chlorinated Polyethylene Rubber/Nitrile Rubber Blends

Zhen Xiu Zhang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

添加到收藏夹

Article Polymer Science

Effects of Blend Ratio on Rheology, Morphology, Mechanical and Oil-Resistant Properties in Chlorinated Polyethylene Rubber and Copolyamide Blends

Yang Liu et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chlorinated polyethylene nanocomposites: thermal and mechanical behavior

Sritama Kar et al.

JOURNAL OF MATERIALS SCIENCE (2010)

添加到收藏夹

Article Polymer Science

Mechanical properties of hydroxyl functionalized chlorinated polyethylene prepared by in situ chlorinating graft copolymerization

Yingying Sun et al.

JOURNAL OF POLYMER RESEARCH (2009)

添加到收藏夹

Article Polymer Science

Chlorinated polyethylene nanocomposites using PCL/clay nanohybrid masterbatches

Samira Benali et al.

EUROPEAN POLYMER JOURNAL (2008)

添加到收藏夹

Article Materials Science, Composites

Impact modifiers and their influence in toughness and plate-out in highly filled rigid PVC formulations

E. Torres et al.

PLASTICS RUBBER AND COMPOSITES (2008)

添加到收藏夹

Article Thermodynamics

Thermal behavior and characterization of solid-state chlorinated polyethylenes

Stoyanka Stoeva et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2006)

添加到收藏夹

Article Mechanics

Mechanical properties of high-density polyethylene/chlorinated polyethylene blends

RD Maksimov et al.

MECHANICS OF COMPOSITE MATERIALS (2004)

添加到收藏夹

Article Polymer Science

Nanocomposites of poly(vinyl chloride) and nanometric calcium carbonate particles: Effects of chlorinated polyethylene on mechanical properties, morphology, and rheology

DZ Wu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

添加到收藏夹

Article Chemistry, Applied

Thermal decomposition of chlorinated poly(vinyl chloride) (CPVC)

EO Elakesh et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2003)

添加到收藏夹

Article Engineering, Electrical & Electronic

Study on dielectric properties of oil/water random composites

QZ Xue

JOURNAL OF ELECTROSTATICS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.