☆ 4.7 Article

Densification mechanism and corrosion resistance of h-BN/ZrO2 ceramics prepared by spark plasma sintering

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Low temperature synthesis and spark plasma sintering of a boron carbide with a low residual carbon content

Jonathan Kenny et al.

Summary: Using spark plasma sintering, >98.5% dense boron carbide samples were successfully fabricated from powders synthesized via a low temperature process. The synthesized powder showed lower levels of residual free carbon compared to commercially available samples, resulting in higher hardness values despite a coarser grain size. This improvement is believed to be due to the influence of ZrO2 and AlB2 impurities introduced during powder milling, rather than the lower carbon content.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

An optimized method for synthesizing phase-pure Ti3AlC2 MAX-phase through spark plasma sintering

Mohammad Yunus et al.

Summary: Despite attempts to synthesize phase-pure Ti3AlC2 MAX-phase, the presence of TiC and Ti-Al based intermetallic impurities remains a challenge, with a lack of stability observed at temperatures above 1350 degrees C. This study presents an optimized method for producing phase-pure Ti3AlC2 MAX-phase with high purity using commercial grade Ti, Al, and C elemental powders through Spark Plasma Sintering technique, demonstrating good high temperature stability up to 1500 degrees C under flowing Argon inert atmosphere.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Influence of spark plasma sintering conditions on microstructure, carbon contamination, and transmittance of CaF2 ceramics

Ping Wang et al.

Summary: The experiment results showed that factors such as sintering temperature, pressure, and pre-loading pressure can affect the performance of CaF2 ceramics. Low sintering pressure and high sintering pressure can respectively reduce porosity and carbon concentration, achieving dense transparent ceramics.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

A novel approach for processing CaAlSiON glass-ceramics by spark plasma sintering: Mechanical and electrical properties

Sharafat Ali et al.

Summary: This study evaluated the use of lithium-doped glassy materials for solid electrolytes or electrode materials for lithium-ion batteries. The spark plasma sintering technique (SPS) was shown to offer advantages in producing glass-ceramics, allowing for rapid heating rates and tuning of properties. Increasing the amount of Li in the glass matrix was found to increase crystallinity, while nano-indentation analysis demonstrated decreased hardness and reduced elastic modulus values with the addition of Li-ions.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Corrosion mechanism of BN-ZrO2 based side-dam by molten steel

Fan Qian et al.

Summary: This study reveals the corrosion mechanism of BN-ZrO2 based side-dam in molten steel through contemporary detection technologies and microscopic analysis, including amorphous generation, dissolution-precipitation, and solid-phase skeleton formation.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Optimal preparation of high-entropy boride-silicon carbide ceramics

Yan Zhang et al.

Summary: This study examined the effects of using borothermal and boro/carbothermal reduction methods in fabricating high-entropy boride-silicon carbide (HEB-SiC) ceramics. It was found that spark plasma sintering at 2000 degrees C could achieve HEB-SiC ceramics with > 98% theoretical density, and the addition of SiC resulted in slight coarsening of the microstructure. The results suggested that the choice of powder processing method and the inclusion of SiC phase could optimize the preparation of high-entropy boride-based ceramics.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Baofu Qiu et al.

Summary: BN/La-Al-Si-O composite ceramics were fabricated by hot-pressed sintering using h-BN, La2O3, Al2O3, and SiO2. The presence of La-Al-Si-O liquid phase during sintering facilitated the growth of h-BN grains, while simultaneous cristobalite phase precipitation and h-BN grain growth at higher sintering temperatures significantly influenced densification and mechanical properties. Optimal mechanical properties were achieved at a sintering temperature of 1700 degrees C.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Densification of surface-modified silicon carbide powder by spark-plasma-sintering

Alejandro Monton et al.

Summary: SiC was densified by spark plasma sintering (SPS), with investigations on the effects of surface modification of the powder particles. Lower temperature experiments showed that surface functionalization can reduce the sintering temperature and facilitate densification.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Improvement in mechanical properties in AlN-h-BN composites with high thermal conductivity

Zetan Liu et al.

Summary: The machinability of aluminum nitride-hexagonal boron nitride (AlN-h-BN) ceramics can be improved while maintaining high strength and thermal conductivity by incorporating up to 30 wt% BN as a secondary phase and using yttrium oxide as a sintering aid. The addition of sintering additives helps purify grain boundaries and enhance densification. The optimal BN content enhances flexural strength and fracture toughness of the composite ceramics.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural evolution and mechanical properties of h-BN composite ceramics with Y2O3-AlN addition by liquid-phase sintering

Bao-Fu Qiu et al.

RARE METALS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

Zhuo Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Anisotropic properties of textured h-BN matrix ceramics prepared using 3Y2O3-5Al2O3(-4MgO) as sintering additives

Zhuo Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Friction and wear behavior of spark plasma-sintered cBN-added Al2O3-PSZ-based composites

Bilge Yaman et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics

Delong Cai et al.

JOURNAL OF MATERIALS SCIENCE (2016)

添加到收藏夹

Article Materials Science, Ceramics

Review on the properties of hexagonal boron nitride matrix composite ceramics

Xiaoming Duan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Materials Science, Ceramics

Physical and mechanical properties of hexagonal boron nitride ceramic fabricated by pressureless sintering without additive

T. B. Wang et al.

ADVANCES IN APPLIED CERAMICS (2015)

添加到收藏夹

Article Materials Science, Ceramics

Kinetics of Corrosion of BN-ZrO2-SiC Ceramics in Contact with Si-Killed Steel

Abhishek Kumar et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Materials Science, Ceramics

High temperature oxidation resistance of hot-pressed h-BN/ZrO2 composites

Yin Xu et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion kinetics and corrosion mechanisms of BN-ZrO2-SiC composites in molten steel

Lei Chen et al.

CORROSION SCIENCE (2014)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical properties and microstructure of porous BN-SiO2-Si3N4 composite ceramics

Na-Na Long et al.

CERAMICS INTERNATIONAL (2012)

添加到收藏夹

Article Chemistry, Physical

Atomic layers of hybridized boron nitride and graphene domains

Lijie Ci et al.

NATURE MATERIALS (2010)

添加到收藏夹

Article Materials Science, Ceramics

Oxidation resistance of hot-pressed SiC-BN composites

Zhi-Hua Yang et al.

CERAMICS INTERNATIONAL (2008)

添加到收藏夹

Article Materials Science, Ceramics

Boron nitride (BN) and BN composites for high-temperature applications

Jens Eichler et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)

添加到收藏夹

Review Materials Science, Multidisciplinary

The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method

ZA Munir et al.

JOURNAL OF MATERIALS SCIENCE (2006)

添加到收藏夹

Article Materials Science, Ceramics

Ceramic matrix composite corrosion models

KG Nickel

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)

添加到收藏夹

Article Materials Science, Ceramics

Wettability and corrosion of TiN, TiN-BN and TiN-AlN by liquid steel

A Amadeh et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)

添加到收藏夹

Article Materials Science, Ceramics

Co-enhanced SiO2-BN ceramics for high-temperature dielectric applications

G Wen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.