相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Promoted formation of stereocomplex in enantiomeric poly(lactic acid)s induced by cellulose nanofibers
Qian Ren et al.
CARBOHYDRATE POLYMERS (2022)
Cellulose nanofiber reinforced poly (lactic acid) with enhanced rheology, crystallization and foaming ability
Qian Ren et al.
CARBOHYDRATE POLYMERS (2022)
Nanocellulose nanocomposite aerogel towards efficient oil and organic solvent adsorption
Hongbo Gu et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)
Preparation and properties of thermoplastic polyurethane foams with bimodal structure based on TPU/PDMS blends
Bozhen Wu et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2021)
Microcellular injection molded outstanding oleophilic and sound-insulating PP/PTFE nanocomposite foam
Jinchuan Zhao et al.
COMPOSITES PART B-ENGINEERING (2021)
Lightweight and strong gelling agent-reinforced injection-molded polypropylene composite foams fabricated using low-pressure CO2 as the foaming agent
Qian Ren et al.
JOURNAL OF CO2 UTILIZATION (2021)
Lightweight and strong glass fiber reinforced polypropylene composite foams achieved by mold-opening microcellular injection molding
Chunxia Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Ultra-lightweight, super thermal-insulation and strong PP/CNT microcellular foams
Jinchuan Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Strong and super thermally insulating in-situ nanofibrillar PLA/PET composite foam fabricated by high-pressure microcellular injection molding
Guilong Wang et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Highly expanded fine-cell foam of polylactide/polyhydroxyalkanoate/nano-fibrillated polytetrafluoroethylene composites blown with moldopening injection molding
Richard E. Lee et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Green fabrication method of layered and open-cell polylactide foams for oil-sorption via pre-crystallization and supercritical CO2-induced melting
Bo Li et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2020)
Controlled Arrangement of Nanocellulose in Polymeric Matrix: From Reinforcement to Functionality
Na Peng et al.
ACS NANO (2020)
Ultra-high expansion linear polypropylene foams prepared in a semi-molten state under supercritical CO2
Junji Hou et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2019)
Effect of Cellulose Nanofiber (CNF) Surface Treatment on Cellular Structures and Mechanical Properties of Polypropylene/CNF Nanocomposite Foams via Core-Back Foam Injection Molding
Long Wang et al.
POLYMERS (2019)
Strong and thermally insulating polylactic acid/glass fiber composite foam fabricated by supercritical carbon dioxide foaming
Jiachang Wang et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Effects and mechanism of cellulose acetate butyrate on the crystallization of polylactic acid
Jun Kuang et al.
EUROPEAN POLYMER JOURNAL (2019)
Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding
Guilong Wang et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Foaming of polymers with supercritical fluids and perspectives on the current knowledge gaps and challenges
Ernesto Di Maio et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2018)
Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications
Guilong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Lightweight and strong microcellular injection molded PP/talc nanocomposite
Guilong Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Effect of surface modification on the dispersion, rheological behavior, crystallization kinetics, and foaming ability of polypropylene/cellulose nanofiber nanocomposites
Long Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Morphological, physical and mechanical properties of nanocrystalline cellulose filled Nylon 6 foams
Hajar Yousefian et al.
JOURNAL OF CELLULAR PLASTICS (2017)
Fabrication of lightweight microcellular foams in injection-molded polypropylene using the synergy of long-chain branches and crystal nucleating agents
Long Wang et al.
POLYMER (2017)
Use of stereocomplex crystallites for fully-biobased microcellular low-density poly(lactic acid) foams for green packaging
Long Wang et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Effects of hydrophobic-modified cellulose nanofibers (CNFs) on cell morphology and mechanical properties of high void fraction polypropylene nanocomposite foams
Long Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Fundamental Influences of Induced Crystallization and Phase Separation on the Foaming Behavior of Poly(lactic acid)/Polyethylene Glycol Blends Blown with Compressed CO2
Qian Ren et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Fabrication of High Expansion Microcellular Injection-Molded Polypropylene Foams by Adding Long-Chain Branches
Long Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Cell nucleation in dominating formation of bimodal cell structure in polypropylene/polystyrene blend foams prepared via continuous extrusion with supercritical CO2
Kun Wang et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2016)
Sustainable polymers from renewable resources
Yunqing Zhu et al.
NATURE (2016)
Polymorphic Crystalline Structure and Crystal Morphology of Enantiomeric Poly(lactic acid) Blends Tailored by a Self-Assemblable Aryl Amide Nucleator
Qing Xie et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Strong Surface Treatment Effects on Reinforcement Efficiency in Biocomposites Based on Cellulose Nanocrystals in Poly(vinyl acetate) Matrix
Farhan Ansari et al.
BIOMACROMOLECULES (2015)
Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors
A. Ameli et al.
CHEMICAL ENGINEERING JOURNAL (2015)
A novel method of producing lightweight microcellular injection molded parts with improved ductility and toughness
Xiaofei Sun et al.
POLYMER (2015)
Biodegradable and renewable poly(lactide)-lignin composites: synthesis, interface and toughening mechanism
Yang Sun et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties
A. Ameli et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
On the use of nanocellulose as reinforcement in polymer matrix composites
Koon-Yang Lee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Nonisothermal Crystallization Kinetics of Poly(lactic acid) Nucleated with a Multiamide Nucleating Agent
Ting Xu et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2014)
An Ultrastrong Nanofibrillar Biomaterial: The Strength of Single Cellulose Nanofibrils Revealed via Sonication-Induced Fragmentation
Tsuguyuki Saito et al.
BIOMACROMOLECULES (2013)
Microcellular Foaming of Poly(lactic acid)/Silica Nanocomposites in Compressed CO2: Critical Influence of Crystallite Size on Cell Morphology and Foam Expansion
Guoying Ji et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Influence of cellulose nanofibers on the morphology and physical properties of poly(lactic acid) foaming by supercritical carbon dioxide
Se Youn Cho et al.
MACROMOLECULAR RESEARCH (2013)
Nanocellulose: a new ageless bionanomaterial
Alain Dufresne
MATERIALS TODAY (2013)
Effects of nano-/micro-sized additives on the crystallization behaviors of PLA and PLA/CO2 mixtures
Mohammadreza Nofar et al.
POLYMER (2013)
Poly(lactic acid) crystallization
Sajjad Saeidlou et al.
PROGRESS IN POLYMER SCIENCE (2012)
The role of cellulose nanofibres in supercritical foaming of polylactic acid and their effect on the foam morphology
Jana Dlouha et al.
SOFT MATTER (2012)
Crystallization Kinetics of Linear and Long-Chain-Branched Polylactide
Mohammadreza Nofar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion
Mehdi Jonoobi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Preparation in supercritical CO2 of porous poly(methyl methacrylate)-poly(L-lactic acid) (PMMA-PLA) scaffolds incorporating ibuprofen
D. Velasco et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2010)
Rheology and Extrusion Foaming of Chain-Branched Poly(lactic acid)
Mihaela Mihai et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Effects of die geometry on cell nucleation of PS foams blown with CO2
X Xu et al.
POLYMER ENGINEERING AND SCIENCE (2003)
The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP
JL Thomason
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)