4.1 Article

Deep desulfurization of real fuel oils over tin-impregnated graphene oxide-hydrogen peroxide and formic acid catalyst-oxidant system

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Phosphomolybdic acid-based sulfur-containing metal-organic framework as an efficient catalyst for dibenzothiophene oxidative desulfurization

Haifeng Ji et al.

Summary: In this study, novel HPMo@DUT-67 composites were successfully synthesized by inducing the autonomous assembly of MOFs with polyoxometalate as guest molecules. The microstructure and catalytic performance of the composites were investigated. The results showed that the composites exhibited excellent catalytic activity and reusability for oxidative desulfurization.

JOURNAL OF SULFUR CHEMISTRY (2022)

Article Engineering, Chemical

Oxidative desulfurization of model and real petroleum distillates using Cu or Ni impregnated banana peels derived activated carbon-NaClO catalyst-oxidant system

Muhammad Yaseen et al.

Summary: Sulfur compounds in transportation fuels cause serious environmental pollution when burned. This study presents the catalytic oxidative desulfurization (ODS) of model and real petroleum distillates using sodium hypochlorite (NaClO) as oxidant over Cu and Ni loaded activated carbon (AC) derived from banana peels. The Ni/AC-NaClO catalyst-oxidant system showed high catalytic activity and stability for sulfur removal, outperforming some state-of-the-art catalysts reported. The presence of super-strong oxidizing species of hypochlorite (OCl-) generated from NaClO dissociation over the catalyst surface contributed to the excellent performance.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)

Article Chemistry, Multidisciplinary

Deep Adsorption Desulfurization of Fluid Catalytic Cracking Light Gasoline on NiO/ZnO-TiO2 Adsorbents with a High Breakthrough Sulfur Capacity

Guanglin Zhou et al.

Summary: Two kinds of NiO/ZnO-TiO2 adsorbents were prepared using different methods, and their surface morphology and active site distribution were found to vary significantly. NiO/ZnO-TiO2-2 prepared by kneading exhibited smaller pore size, larger specific surface area, and stronger interaction between the active component and the support. During desulfurization, NiO/ZnO-TiO2-2 effectively inhibited olefin saturation and demonstrated better desulfurization performance.

ACS OMEGA (2022)

Review Energy & Fuels

Perspectives on Advances in the Catalytic Desulfurization and Denitrogenation of Transportation Fuel Oils Using Graphitic Carbon Nitride and Boron Nitride

Sana Ullah et al.

Summary: This review systematically summarizes the applications of graphitic carbon nitride (g-C3N4) and boron nitrides (BNs) in fuel oil processing, including synthesis methods, various properties, and experimental findings. It also provides important suggestions for future research directions and new technologies using g-C3N4 and BNs for the processing of transportation fuels.

ENERGY & FUELS (2022)

Article Energy & Fuels

Hausmannite Mn3O4 functionalized graphene Oxide-NaClO system for oxidative desulfurization and denitrogenation of fuel oils

Muhammad Yaseen et al.

Summary: In this study, Hausmannite Manganese oxides nanocubes (Mn3O4) deposited on graphene oxide (GO) nanosheets were synthesized and composited together as Mn3O4/GO via in-situ pot hydrothermal technique. The synthesized materials were characterized by various analytical procedures, showing that the Mn3O4/GO composite had a large active surface area and surface functionalities, which resulted in excellent catalytic performance. Moreover, the Mn3O4/GO-NaClO system exhibited good catalytic response in the ultra-fast and highly efficient, environment friendly and cost-effective oxidative desulfurization and denitrogenation of fuel oils.
Article Engineering, Chemical

Recovery and characterization of useful benzene derivatives from spent engine oil through solvent extraction

Muhammad Yaseen et al.

Summary: This study successfully extracted useful hydrocarbons from used engine oil through solvent extraction and column separation, developing a highly efficient and cost-effective extraction strategy as a promising alternative to conventional burning and reclamation of oil. The process demonstrated high efficiency and cost-effectiveness, suggesting potential for extraction of other valuable compounds from used oils and mitigating environmental pollution on a larger scale.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2021)

Article Energy & Fuels

Fabrication of Zn and Mn loaded activated carbon derived from corn cobs for the adsorptive desulfurization of model and real fuel oils

Muhammad Yaseen et al.

Summary: In this study, zinc and manganese loaded activated carbon derived from corn cobs were used for adsorptive desulfurization of model and real fuel oils. The results showed that Zn/AC and Mn/AC performed better in removing dibenzothiophene, following pseudo 2nd order kinetics and Freundlich adsorption isotherm model. The prepared adsorbents remained highly active for six repeated cycles with minimal decrease in desulfurization performance under the optimized reaction conditions.
Article Engineering, Environmental

Enhanced Performance of Sulfonated GO in SPEEK Proton-Exchange Membrane for Microbial Fuel-Cell Application

Sivasankaran Ayyaru et al.

Summary: The addition of sulfonated graphene oxide to sulfonated polyetheretherketone membranes can significantly enhance proton conductivity and improve the performance of microbial fuel cells. The membrane with 2% sulfonated graphene oxide showed better performance compared to pristine polyetheretherketone and graphene oxide membranes.

JOURNAL OF ENVIRONMENTAL ENGINEERING (2021)

Article Engineering, Environmental

Fabrication of MnO2 NPs incorporated UiO-66 for the green and efficient oxidative desulfurization and denitrogenation of fuel oils

Sidra Subhan et al.

Summary: In this study, MnO2 nanoparticles were deposited on Zr-based UiO-66 molecular organic framework to create MnO2/UiO-66 composite, which was oxidized with NaClO for catalytic oxidative desulfurization and denitrogenation of fuel oil. Characterization of the composites confirmed uniform deposition of MnO2 and increased surface area of UiO-66, leading to high efficiency in removing sulfur and nitrogen compounds from the fuel oil. The mechanism involved the synergy among Mn4+, Zr4+, and NaClO species, producing strong oxidizing radicals for effective desulfurization and denitrogenation.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Energy & Fuels

Optimization of ultrasonic-assisted oxidative desulfurization of gasoline and crude oil

Cuihong Zhou et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)

Article Chemistry, Physical

A Ti-based bi-MOF for the tandem reaction of H2O2 generation and catalytic oxidative desulfurization

Xiaoyuan Liao et al.

CATALYSIS SCIENCE & TECHNOLOGY (2020)

Article Engineering, Chemical

Porous Hybrid Nanoflower Self-Assembled from Polyoxometalate and Polyionene for Efficient Oxidative Desulfurization

Luhong Zhang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Article Environmental Sciences

Efficient DBT removal from diesel oil by CVD synthesized N-doped graphene as a nanoadsorbent: Equilibrium, kinetic and DFT study

Seyyed Salar Meshkat et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2019)

Article Engineering, Environmental

Catalytic oxidative desulfurization of DBT using green catalyst (Mo/MCM-41) derived from coal fly ash

Prerana Sikarwar et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

Article Engineering, Chemical

Kinetics of Performic Acid Synthesis and Decomposition

Elio Santacesaria et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Materials Science, Multidisciplinary

Nanocarbon materials for oxidative-adsorptive desulfurization using air oxygen under mild conditions

Yongqiang Zhang et al.

DIAMOND AND RELATED MATERIALS (2017)

Article Chemistry, Physical

Mesoporous graphitic carbon nitride as photo-catalyst for oxidative desulfurization with oxygen

Yunfeng Zhu et al.

CATALYSIS COMMUNICATIONS (2016)

Article Thermodynamics

Measurements of H2O2 in low temperature dimethyl ether oxidation

Huijun Guo et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)

Article Chemistry, Applied

Desulfurization of liquid fuels using air-assisted performic acid oxidation and emulsion catalyst

Ahmad Imtiaz et al.

CHINESE JOURNAL OF CATALYSIS (2013)

Article Chemistry, Multidisciplinary

Room-Temperature Hydrogen Sensing with Heteronanostructures Based on Reduced Graphene Oxide and Tin Oxide

Patricia A. Russo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Article Chemistry, Applied

Effect of transition metal oxides catalysts on oxidative desulfurization of model diesel

Wan Azelee Wan Abu Bakar et al.

FUEL PROCESSING TECHNOLOGY (2012)

Article Engineering, Chemical

Removal Mechanism of Thiophenic Compounds in Model Oil by Inorganic Lewis Acids

Jia-jun Gao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

Article Chemistry, Applied

Oxidative Desulfurization of Fuel Oils

Jiang Zongxuan et al.

CHINESE JOURNAL OF CATALYSIS (2011)

Article Chemistry, Organic

Sulfide oxygenation by tert-butyl hydroperoxide with mononuclear (Me3TACN)Mn catalysts

JE Barker et al.

TETRAHEDRON LETTERS (2005)

Article Chemistry, Physical

Influence of the coordination on the catalytic properties of supported W catalysts

F Figueras et al.

JOURNAL OF CATALYSIS (2004)