相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Hydrogen strategy as an energy transition and economic transformation avenue for natural gas exporting countries: Qatar as a case study
Dawood Hjeij et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review
Mohammad Azeem et al.
JOURNAL OF ENERGY STORAGE (2022)
Analytical and numerical approach to determine effective diffusion coefficients for composite pressure vessels
Michael Ebermann et al.
COMPOSITE STRUCTURES (2022)
A Review on Industrial Perspectives and Challenges on Material, Manufacturing, Design and Development of Compressed Hydrogen Storage Tanks for the Transportation Sector
Mariana Pimenta Alves et al.
ENERGIES (2022)
Using OBR for pressure monitoring and BVID detection in type IV composite overwrapped pressure vessels
G. Souza et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Analysis on the mechanical response of composite pressure vessels during internal pressure loading: FE modeling and experimental correlation
M. Nebe et al.
COMPOSITES PART B-ENGINEERING (2021)
Investigation on failure behaviors of 70 MPa Type IV carbon fiber overwound hydrogen storage vessels
Zhengyun Hu et al.
COMPOSITE STRUCTURES (2021)
Large-scale compressed hydrogen storage as part of renewable electricity storage systems
Ahmed M. Elberry et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Low temperature fatigue crack propagation in toughened epoxy resins aimed for filament winding of type V composite pressure vessels
Fabian Huebner et al.
POLYMER TESTING (2021)
Simulation and burst validation of 70 MPa type IV hydrogen storage vessel with dome reinforcement
Zhengyun Hu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Investigation of interlayer hybridization effect on burst pressure performance of composite overwrapped pressure vessels with load-sharing metallic liner
Serkan Kangal et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Design optimization for filament wound cylindrical composite internal pressure vessels considering process-induced residual stresses
Chao Liu et al.
COMPOSITE STRUCTURES (2020)
Theoretical analysis of design of filament wound type 3 composite cylinder for the storage of compressed hydrogen gas
Pranjali Sharma et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Experimental and analytical analysis on the stacking sequence of composite pressure vessels
M. Nebe et al.
COMPOSITE STRUCTURES (2020)
Strain Invariant Failure Theory - Part 1: An extensible framework for predicting the mechanical performance of fibre reinforced polymer composites
G. M. K. Pearce et al.
COMPOSITE STRUCTURES (2019)
Influence of fire intensity, fire impingement area and internal pressure on the fire resistance of composite pressure vessels for the storage of hydrogen in automobile applications
Nicola Hupp et al.
FIRE SAFETY JOURNAL (2019)
Acoustic emission-based damage characterization of 70 MPa type IV hydrogen composite pressure vessels during hydraulic tests
B. B. Liao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Damage localization in hydrogen storage vessel by guided waves based on a real-time monitoring system
Bin Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Review on the research of hydrogen storage system fast refueling in fuel cell vehicle
Mengxiao Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Hydrogen storage and delivery: Review of the state of the art technologies and risk and reliability analysis
Ramin Moradi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
In-Situ Monitoring of a Filament Wound Pressure Vessel by the MWCNT Sensor under Hydraulic Fatigue Cycling and Pressurization
Biao Xiao et al.
SENSORS (2019)
Interaction of Guided Waves with Delamination in a Bilayered Aluminum-Composite Pressure Vessel
Mauro Parodi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Hydrogen energy, economy and storage: Review and recommendation
J. O. Abe et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Dynamics of a type IV conformable pressure vessel for natural gas passenger vehicles
Thomas A. Yersak et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2019)
A literature review of failure prediction and analysis methods for composite high-pressure hydrogen storage tanks
Ming Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Evaluation of the mechanical performance of a composite multi-cell tank for cryogenic storage: Part II - Experimental assessment
Nias G. Tapeinos et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Physical model of onboard hydrogen storage tank thermal behaviour during fuelling
Vladimir Molkov et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Evaluation of the mechanical performance of a composite multi-cell tank for cryogenic storage: Part I - Tank pressure window based on progressive failure analysis
Ilias G. Tapeinos et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Distributed fiber-optic strain sensing with millimeter spatial resolution for the structural health monitoring of multiaxial loaded GFRP tube specimens
Dorit Munzke et al.
POLYMER TESTING (2019)
Experimental Analysis on Residual Performance of Used 70MPa Type IV Composite Pressure Vessels
Dongliang Wang et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2019)
Burst pressure estimations of a composite pressure vessel accounting for the composite shell imperfections
A. E. Burov
MECHANICAL SCIENCE AND TECHNOLOGY UPDATE (MSTU 2019) (2019)
How to Design Hydrogen Storage Materials? Fundamentals, Synthesis, and Storage Tanks
Qiwen Lai et al.
ADVANCED SUSTAINABLE SYSTEMS (2019)
Reliability Analysis of Type III Gas Storage Vessel Under Pressure Loading
A. Ghouaoula et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2019)
Integrated impedance and Lamb wave-based structural health monitoring strategy for long-term cycle-loaded composite structure
Dongyue Gao et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2018)
A simplified method for predicting burst pressure of type III filament-wound CFRP composite vessels considering the inhomogeneity of fiber packing
Shunsuke Harada et al.
COMPOSITE STRUCTURES (2018)
A three dimensional thermodynamically based function for the progressive failure of unidirectional composites
H. Sam Huang et al.
COMPOSITE STRUCTURES (2018)
Stochastic prediction of burst pressure in composite pressure vessels
Roham Rafiee et al.
COMPOSITE STRUCTURES (2018)
Evaluation of stress and crack behavior using the extended finite element method in the composite layer of a type III hydrogen storage vessel
Woo Rim Park et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
Burst Pressure Prediction and Structure Reliability Analysis of Composite Overwrapped Cylinder
Xin Zhang et al.
APPLIED COMPOSITE MATERIALS (2018)
A Large-scale Finite Element Model on Micromechanical Damage and Failure of Carbon Fiber/Epoxy Composites Including Thermal Residual Stress
P. F. Liu et al.
APPLIED COMPOSITE MATERIALS (2018)
Tailoring magnesium based materials for hydrogen storage through synthesis: Current state of the art
Yahui Sun et al.
ENERGY STORAGE MATERIALS (2018)
Optimization of Type 4 composite pressure vessels using genetic algorithms and simulated annealing
V. Alcantar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Performance assessment of 700-bar compressed hydrogen storage for light duty fuel cell vehicles
Thanh Q. Hua et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Hydrogen storage: Recent improvements and industrial perspectives
H. Barthelemy et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Composite pressure vessels for hydrogen storage in fire conditions: Fire tests and burst simulation
Damien Halm et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Burst Pressure Investigation of Filament Wound Type IV Composite Pressure Vessel
Naseer H. Farhood et al.
ADVANCED MATERIALS FOR SUSTAINABILITY AND GROWTH (2017)
Prediction of onset and propagation of damage in the adhesive joining of a dome-separated composite pressure vessel including temperature effects
Jae-Moon Im et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)
Buckling, postbuckling and progressive failure analyses of composite laminated plates under compressive loading
Omer Namdar et al.
COMPOSITES PART B-ENGINEERING (2017)
High pressure strength of carbon fibre reinforced vinylester and epoxy vessels
Yongzheng Shao et al.
COMPOSITE STRUCTURES (2016)
Micromechanics-based progressive failure analysis of carbon fiber/epoxy composite vessel under combined internal pressure and thermomechanical loading
Liang Wang et al.
COMPOSITES PART B-ENGINEERING (2016)
An Integrated Acousto/Ultrasonic Structural Health Monitoring System for Composite Pressure Vessels
Andrea Bulletti et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2016)
The survey of key technologies in hydrogen energy storage
Fan Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
A review on the current progress of metal hydrides material for solid-state hydrogen storage applications
N. A. A. Rusman et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Delamination failure of composite containment vessels subjected to internal blast loading
Jinyang Zheng et al.
COMPOSITE STRUCTURES (2015)
The influence of manufacturing variances on the progressive failure of filament wound cylindrical pressure vessels
Brian Ellul et al.
COMPOSITE STRUCTURES (2015)
Continuum damage modeling and progressive failure analysis of carbon fiber/epoxy composite pressure vessel
Liang Wang et al.
COMPOSITE STRUCTURES (2015)
Stress and deformation of multiple winding angle hybrid filament-wound thick cylinder under axial loading and internal and external pressure
Jingzhong Xing et al.
COMPOSITE STRUCTURES (2015)
Acoustic emission analysis of composite pressure vessels under constant and cyclic pressure
H. Y. Chou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Numerical/experimental impact events on filament wound composite pressure vessel
Giovanni Perillo et al.
COMPOSITES PART B-ENGINEERING (2015)
In situ synchrotron tomographic evaluation of the effect of toughening strategies on fatigue micromechanisms in carbon fibre reinforced polymers
S. C. Garcea et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Experimental and numerical analyses of progressive damage in non-circular metal/composite hybrid vessels under internal pressure
Peyman Karami et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
A probabilistic damage behavior law for composite material dedicated to composite pressure vessel
B. Gentilleau et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Experimental method and numerical simulation demonstrate non-linear axial behaviour in composite filament wound pressure vessel due to thermal expansion effect
P. Nimdum et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Experimental study of the thermomechanical behavior of wound notched structures
Juan Pedro Berro Ramirez et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
A fixed directions damage model for composite materials dedicated to hyperbaric type IV hydrogen storage vessel - Part II: Validation on notched structures
Juan Pedro Berro Ramirez et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Optimisation of 700 bar type IV hydrogen pressure vessel considering composite damage and dome multi-sequencing
D. Leh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
A fixed directions damage model for composite materials dedicated to hyperbaric type IV hydrogen storage vessel - Part I: Model formulation and identification
Juan Pedro Berro Ramirez et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
The effect of defueling rate on the temperature evolution of on-board hydrogen tanks
N. de Miguel et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
A progressive failure analysis of a 700-bar type IV hydrogen composite pressure vessel
D. Leh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
700 bar type IV high pressure hydrogen storage vessel burst - Simulation and experimental validation
Juan Pedro Berro Ramirez et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Compressed hydrogen tanks for on-board application: Thermal behaviour during cycling
N. de Miguel et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Thermal model development and validation for rapid filling of high pressure hydrogen tanks
Terry Johnson et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Modeling, parameters identification and experimental validation of composite materials behavior law used in 700 bar type IV hydrogen high pressure storage vessel
B. Magneville et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Numerical Determination and Experimental Validation of a Technological Specimen Representative of High-Pressure Hydrogen Storage Vessels
B. Gentilleau et al.
MECHANICS OF COMPOSITE MATERIALS (2015)
Hydrogen storage: Materials, methods and perspectives
Saba Niaz et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Stress and Damage Analyses of Composite Overwrapped Pressure Vessel
Q. G. Wu et al.
PRESSURE VESSEL TECHNOLOGY: PREPARING FOR THE FUTURE (2015)
Hydrogen storage in clathrate hydrates: Current state of the art and future directions
Hari Prakash Veluswamy et al.
APPLIED ENERGY (2014)
Finite element modelling of damage induced by low-velocity impact on composite laminates
D. Feng et al.
COMPOSITE STRUCTURES (2014)
Numerical study of influence of temperature and matrix cracking on type IV hydrogen high pressure storage vessel behavior
B. Gentilleau et al.
COMPOSITE STRUCTURES (2014)
Simulating progressive failure of composite laminates including in-ply and delamination damage effects
Jing-Fen Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Failure analysis of carbon fiber/epoxy composite cylindrical laminates using explicit finite element method
P. F. Liu et al.
COMPOSITES PART B-ENGINEERING (2014)
Load sharing ability of the liner in type III composite pressure vessels under internal pressure
Jose Humberto S. Almeida et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Application of surrogate based particle swarm optimization to the reliability-based robust design of composite pressure vessels
Jianqiao Chen et al.
ACTA MECHANICA SOLIDA SINICA (2013)
Optimization of Composite Material System and Lay-up to Achieve Minimum Weight Pressure Vessel
Haris Hameed Mian et al.
APPLIED COMPOSITE MATERIALS (2013)
Reliability design optimization of composite structures based on PSO together with FEA
Chen Jianqiao et al.
CHINESE JOURNAL OF AERONAUTICS (2013)
Optimization of carbon fiber usage in Type 4 hydrogen storage tanks for fuel cell automobiles
H. S. Roh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Fatigue test of carbon epoxy composite high pressure hydrogen storage vessel under hydrogen environment
Chuan-xiang Zheng et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2013)
Low-Velocity Impact and Residual Burst-Pressure Analysis of Cylindrical Composite Pressure Vessels
Eun-Ho Kim et al.
AIAA JOURNAL (2012)
Progressive Failure Analysis of Composite Structures Using a Constitutive Material Model (USERMAT) Developed and Implemented in ANSYS ©
Elisa Pietropaoli
APPLIED COMPOSITE MATERIALS (2012)
Comparison of optimal design methods for type 3 high-pressure storage tanks
P. Francescato et al.
COMPOSITE STRUCTURES (2012)
A combined elastoplastic damage model for progressive failure analysis of composite materials and structures
J. F. Chen et al.
COMPOSITE STRUCTURES (2012)
Micromechanical damage modeling and multiscale progressive failure analysis of composite pressure vessel
P. F. Liu et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Hydrogen storage - Industrial prospectives
Herve Barthelemy
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
CFD analysis of fast filling scenarios for 70 MPa hydrogen type IV tanks
M. Cristina Galassi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Determination of the autofrettage pressure and estimation of material failures of a Type III hydrogen pressure vessel by using finite element analysis
Dae-Sung Son et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Development of high pressure gaseous hydrogen storage technologies
Jinyang Zheng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Progressive failure analysis of glass/epoxy composites at low temperatures
M. M. Shokrieh et al.
STRENGTH OF MATERIALS (2012)
Reliability-based load and resistance factor design of composite pressure vessel under external hydrostatic pressure
Baoping Cai et al.
COMPOSITE STRUCTURES (2011)
In situ fibre fracture measurement in carbon-epoxy laminates using high resolution computed tomography
A. E. Scott et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Influence of temperature on the fatigue strength of compressed-hydrogen tanks for vehicles
Jun-ichi Tomioka et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Determination of lifetime probabilities of carbon fibre composite plates and pressure vessels for hydrogen storage
S. Camara et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Effects of moisture on matrix cracking in a cryo-cycled cross-ply laminate
Mark R. Garnich et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
Optimization of composite pressure vessels with metal liner by adaptive response surface method
Abbas Vafaeesefat
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2011)
On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses
R. Gutkin et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)
A composite finite element to predict failure progress in composite laminates accounting for nonlinear material properties
Ghazi A. Abu-Farsakh et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2011)
Thermal characteristics during hydrogen fueling process of type IV cylinder
Sung Chan Kim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Optimal design of high pressure hydrogen storage vessel using an adaptive genetic algorithm
Ping Xu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Technical assessment of cryo-compressed hydrogen storage tank systems for automotive applications
R. K. Ahluwalia et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Strength reliability analysis of aluminium-carbon fiber/epoxy composite laminates
P. F. Liu et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2010)
Vibration-based Damage Detection to the Composite Tank Filled with Fluid
Wensong Zhou et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2010)
Burst failure load of composite pressure vessels
Aziz Onder et al.
COMPOSITE STRUCTURES (2009)
Artificial immune system for optimal design of composite hydrogen storage vessel
Pengfei Liu et al.
COMPUTATIONAL MATERIALS SCIENCE (2009)
Risk identification and control of stationary high-pressure hydrogen storage vessels
Ping Xu et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2009)
Finite element analysis of burst pressure of composite hydrogen storage vessels
P. Xu et al.
MATERIALS & DESIGN (2009)
Review of Degradation Models for Progressive Failure Analysis of Fiber Reinforced Polymer Composites
Mark R. Garnich et al.
Applied Mechanics Reviews (2008)
Delamination behaviour of very high modulus carbon/epoxy marine composites
N. Baral et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
A progressive failure model for composite laminates subjected to low velocity impact damage
M. V. Donadon et al.
COMPUTERS & STRUCTURES (2008)
21st Century's energy: Hydrogen energy system
T. Nejat Veziroglu et al.
ENERGY CONVERSION AND MANAGEMENT (2008)
Micro-mechanics of failure (MMF) for continuous fiber reinforced composites
Sung Kyu Ha et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics
P. F. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Limiting the permeability of composites for cryogenic applications
Vernon T. Bechel et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Ultrasonic ply-by-ply detection of matrix cracks in laminated composites
Vikram K. Kinra et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2006)
Progress and problems in hydrogen storage methods
L Zhou
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2005)
Progressive damage analysis of multi-bolt composite joints with variable bolt-hole clearances
CT McCarthy et al.
COMPOSITES PART B-ENGINEERING (2005)
Composite laminate failure analysis using multicontinuum theory
JS Mayes et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Experimental and numerical investigation of the tension and compression strength of un-notched and notched quasi-isotropic laminates
J Wang et al.
COMPOSITE STRUCTURES (2004)
Probabilistic deformation and strength prediction for a filament wound pressure vessel
TK Hwang et al.
COMPOSITES PART B-ENGINEERING (2003)
Failure analysis of FRP laminates by means of physically based phenomenological models
A Puck et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Free edge effect on the post failure behavior of composite laminates under tensile loading
SG Joo et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2001)
Experimental and theoretical analyses of first-ply failure of laminated composite pressure vessels
RR Chang
COMPOSITE STRUCTURES (2000)