4.6 Article

Molecular Electronic Study of Spiro- [cyclopenta[1,2-b:5,4-b′]dithiophene-4,9′-fluorene] Derivatives: Route to Decent Hole-Transporting Materials

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Engineering of dendritic dopant-free hole transport molecules: enabling ultrahigh fill factor in perovskite solar cells with optimized dendron construction

Wei Chen et al.

Summary: A novel dendritic engineering strategy was utilized to design dopant-free hole-transporting materials (HTMs) for high-performance perovskite solar cells (PVSCs). HTMs MPA-Cz-BTI and MCz-Cz-BTI exhibited improved interfacial contact with the perovskite active layer, resulting in high power conversion efficiencies and ultrahigh fill factors.

SCIENCE CHINA-CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Dually-Passivated Perovskite Solar Cells with Reduced Voltage Loss and Increased Super Oxide Resistance

Qin Zhou et al.

Summary: In recent years, the power conversion efficiency of perovskite solar cells has rapidly improved, but defects at the grain boundaries and surfaces remain a challenge. A dual-passivation strategy effectively reduces defect density, enhancing device performance and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Design of Low Crystallinity Spiro-Typed Hole Transporting Material for Planar Perovskite Solar Cells to Achieve 21.76% Efficiency

Zihao Deng et al.

Summary: Two novel HTMs, SC and ST, were designed in this study to substitute traditional spiro-OMeTAD, with SC showing superior performance in terms of efficiency and stability. Whereas ST exhibits lower efficiency and stability due to its high crystallinity and poor solubility.

CHEMISTRY OF MATERIALS (2021)

Article Nanoscience & Nanotechnology

Fused Dithienopicenocarbazole Enabling High Mobility Dopant-Free Hole-Transporting Polymers for Efficient and Stable Perovskite Solar Cells

Zilong Zhang et al.

Summary: This study introduces two novel donor-acceptor conjugated polymers with excellent hole mobility and superior PCE for the application in dopant-free PSCs, providing a new approach for improving device performance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

A Triple Axial Chirality, Racemic Molecular Semiconductor Based on Thiahelicene and Ethylenedioxythiophene for Perovskite Solar Cells: Microscopic Insights on Performance Enhancement

Aibin Zheng et al.

Summary: This study introduces a molecular semiconductor with triple axial chirality designed in silico, which can be used as the hole transport layer in perovskite solar cells, providing high efficiency and long-term stability. The composite material of this semiconductor has a high glass transition temperature, stable morphology, and can suppress the motion of diffusive components, thereby controlling the degradation of the photoactive layer.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Isomeric Carbazole-Based Hole-Transporting Materials: Role of the Linkage Position on the Photovoltaic Performance of Perovskite Solar Cells

Albertus Adrian Sutanto et al.

Summary: Two structural isomers of carbazole with triarylamine substitution were synthesized and studied for their impact on various properties. One isomer, Car[2,3], exhibited the highest power conversion efficiency in perovskite solar cells, attributed to efficient hole transport due to suitable energy alignment.

CHEMISTRY OF MATERIALS (2021)

Article Chemistry, Multidisciplinary

Marked Passivation Effect of Naphthalene-1,8-Dicarboximides in High-Performance Perovskite Solar Cells

Zhihao Zhang et al.

Summary: This study uses two structurally similar polyaromatic molecules to improve the lifetime and efficiency of perovskite solar cells, successfully designing a more effective passivator and achieving higher device efficiency.

ADVANCED MATERIALS (2021)

Article Energy & Fuels

Azatriphenylene-based D-A-D-typed hole-transporting materials for perovskite solar cells with tunable energy levels and high mobility

Zhu-Zhu Sun et al.

Summary: In this study, six novel D-A-D type HTMs and three thiophene-substituted acceptors were designed and the influences of acceptor moiety on HTMs performance were investigated through theoretical chemical calculations. The results showed that the designed HTMs exhibited more negative HOMO energy levels and slightly red-shifted light absorption, with a small torsion angle between the acceptor and donor proving beneficial for hole transport and charge mobility enhancement. Moreover, the large charge transfer amounts and small exciton binding energies of the HTMs may facilitate electron-hole separation, although their stability could be compromised according to the calculated electrostatic surface potential and absolute hardness results.

SOLAR ENERGY (2021)

Article Chemistry, Physical

Fluorene-based enamines as low-cost and dopant-free hole transporting materials for high performance and stable perovskite solar cells

Sarune Daskeviciute et al.

Summary: Research on perovskite solar cells demonstrates that hole transporting materials prepared via simple chemistry methods can achieve high performance, while also offering lower cost and better stability compared to materials obtained through expensive cross-coupling techniques.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Efficient Perovskite Solar Cells by Reducing Interface-Mediated Recombination: a Bulky Amine Approach

Lusheng Liang et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Aza[5]helicene Rivals N-Annulated Perylene as π-Linker of D-π-D Typed Hole-Transporters for Perovskite Solar Cells

Jianan Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

Review Chemistry, Multidisciplinary

Molecular materials as interfacial layers and additives in perovskite solar cells

Maria Vasilopoulou et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Nanoscience & Nanotechnology

Unraveling the Structure-Property Relationship of Molecular Hole-Transporting Materials for Perovskite Solar Cells

Lingyi Fang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Cyclopentadithiophene and Fluorene Spiro-Core-Based Hole-Transporting Materials for Perovskite Solar Cells

Rana Nakar et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Review Chemistry, Multidisciplinary

Efficiency vs. stability: dopant-free hole transporting materials towards stabilized perovskite solar cells

Kasparas Rakstys et al.

CHEMICAL SCIENCE (2019)

Review Chemistry, Physical

Less is More: Dopant-Free Hole Transporting Materials for High-Efficiency Perovskite Solar Cells

Weiqi Zhou et al.

ADVANCED ENERGY MATERIALS (2018)

Review Chemistry, Physical

Spiro-linked organic small molecules as hole-transport materials for perovskite solar cells

Sivakumar Gangala et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Multidisciplinary

Highly Efficient Perovskite Solar Cells Employing an Easily Attainable Bifluorenylidene-Based Hole-Transporting Material

Kasparas Rakstys et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Review Chemistry, Multidisciplinary

Hole-Transport Materials for Perovskite Solar Cells

Laura Calio et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Multidisciplinary

Theoretical Study of the Molecular Ordering, Paracrystallinity, And Charge Mobilities of Oligomers in Different Crystalline Phases

Ilhan Yavuz et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

Article Chemistry, Physical

Spiro-thiophene derivatives as hole-transport materials for perovskite solar cells

Shuying Ma et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Multidisciplinary

Organohalide lead perovskites for photovoltaic applications

Peng Gao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

Article Multidisciplinary Sciences

Sequential deposition as a route to high-performance perovskite-sensitized solar cells

Julian Burschka et al.

NATURE (2013)

Article Multidisciplinary Sciences

Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3

Guichuan Xing et al.

SCIENCE (2013)

Article Chemistry, Multidisciplinary

Multiwfn: A multifunctional wavefunction analyzer

Tian Lu et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2012)

Article Chemistry, Physical

OPAL: A Multiscale Multicenter Simulation Package Based on MPI-2 Protocol

Chao Cao et al.

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY (2011)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Review Chemistry, Multidisciplinary

Spiro compounds for organic optoelectronics

Tobat P. I. Saragi et al.

CHEMICAL REVIEWS (2007)

Review Chemistry, Multidisciplinary

Hopping transport in conductive heterocyclic oligomers: Reorganization energies and substituent effects

GR Hutchison et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)

Article Chemistry, Multidisciplinary

Solvent effects on charge transfer bands of nitrogen-centered intervalence compounds

SF Nelsen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2001)