相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Lithium-ion batteries remaining useful life prediction based on BLS-RVM
Zewang Chen et al.
ENERGY (2021)
Mechanistic underpinnings of thermal gradient induced inhomogeneity in lithium plating
Conner Fear et al.
ENERGY STORAGE MATERIALS (2021)
State of charge prediction of EV Li-ion batteries using EIS: A machine learning approach
Iman Babaeiyazdi et al.
ENERGY (2021)
Guiding the Design of Heterogeneous Electrode Microstructures for Li-Ion Batteries: Microscopic Imaging, Predictive Modeling, and Machine Learning
Hongyi Xu et al.
ADVANCED ENERGY MATERIALS (2021)
Overdischarge Detection and Prevention With Temperature Monitoring of Li-Ion Batteries and Linear Regression-Based Machine Learning
Bing Li et al.
JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE (2021)
Challenges and key requirements of batteries for electric vertical takeoff and landing aircraft
Xiao-Guang Yang et al.
JOULE (2021)
Enabling fast charging of lithium-ion batteries through secondary-/dual- pore network: Part II - numerical model
Weijie Mai et al.
ELECTROCHIMICA ACTA (2020)
Enabling fast charging of lithium-ion batteries through secondary-/dual- pore network: Part I - Analytical diffusion model
F. L. E. Usseglio-Viretta et al.
ELECTROCHIMICA ACTA (2020)
Identifying degradation patterns of lithium ion batteries from impedance spectroscopy using machine learning
Yunwei Zhang et al.
NATURE COMMUNICATIONS (2020)
A Framework for Optimal Safety Li-ion Batteries Design using Physics-Based Models and Machine Learning Approaches
Takumi Yamanaka et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
A database of battery materials auto-generated using ChemDataExtractor
Shu Huang et al.
SCIENTIFIC DATA (2020)
Mechanistic Analysis of Microstructural Attributes to Lithium Plating in Fast Charging
Venkatesh Kabra et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Predicting porosity, permeability, and tortuosity of porous media from images by deep learning
Krzysztof M. Graczyk et al.
SCIENTIFIC REPORTS (2020)
Fingerprinting Redox Heterogeneity in Electrodes during Extreme Fast Charging
Aashutosh Mistry et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Fast Charging of Lithium-ion Batteries via Electrode Engineering
Bairav S. Vishnugopi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Data-driven prediction of battery cycle life before capacity degradation
Kristen A. Severson et al.
NATURE ENERGY (2019)
Quantifying Transport, Geometrical, and Morphological Parameters in Li-Ion Cathode Phases Using X-ray Microtomography
Thushananth Rajendra et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Challenges and opportunities towards fast-charging battery materials
Yayuan Liu et al.
NATURE ENERGY (2019)
Material search for Li-ion battery electrolytes through an exhaustive search with a Gaussian process
Tomofumi Nakayama et al.
CHEMICAL PHYSICS LETTERS (2019)
An efficient machine learning approach to establish structure-property linkages
Jaimyun Jung et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Data-Driven Studies of Li-Ion-Battery Materials
Steven K. Kauwe et al.
CRYSTALS (2019)
Surface Area of Lithium-Metal Electrodes Measured by Argon Adsorption
Rochelle Weber et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Secondary-Phase Stochastics in Lithium-Ion Battery Electrodes
Aashutosh N. Mistry et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Quantifying Inhomogeneity of Lithium Ion Battery Electrodes and Its Influence on Electrochemical Performance
Simon Mueller et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Tortuosity of Battery Electrodes: Validation of Impedance-Derived Values and Critical Comparison with 3D Tomography
Johannes Landesfeind et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Three-dimensional localization of nanoscale battery reactions using soft X-ray tomography
Young-Sang Yu et al.
NATURE COMMUNICATIONS (2018)
Performance Metrics Required of Next Generation Batteries to Electrify Vertical Takeoff and Landing (VTOL) Aircraft
William L. Fredericks et al.
ACS ENERGY LETTERS (2018)
Mesoscale Analysis of Conductive Binder Domain Morphology in Lithium-Ion Battery Electrodes
Bradley L. Trembacki et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Resolving the Discrepancy in Tortuosity Factor Estimation for Li-Ion Battery Electrodes through Micro-Macro Modeling and Experiment
Francois L. E. Usseglio-Viretta et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Multi-scale 3D investigations of a commercial 18650 Li-ion battery with correlative electron- and X-ray microscopy
Jeff Gelb et al.
JOURNAL OF POWER SOURCES (2017)
Determination of Tortuosity Using Impedance Spectra Analysis of Symmetric Cell
Simon Malifarge et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Morphology and texture of spheroidized natural and synthetic graphites
Manuel Mundszinger et al.
CARBON (2017)
Multiscale modeling of lithium-ion battery electrodes based on nano-scale X-ray computed tomography
Ali Ghorbani Kashkooli et al.
JOURNAL OF POWER SOURCES (2016)
Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy
Johannes Landesfeind et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Juliette Billaud et al.
NATURE ENERGY (2016)
High-performance battery electrodes via magnetic templating
J. S. Sander et al.
NATURE ENERGY (2016)
Promise and reality of post-lithium-ion batteries with high energy densities
Jang Wook Choi et al.
NATURE REVIEWS MATERIALS (2016)
A novel multistage Support Vector Machine based approach for Li ion battery remaining useful life estimation
Meru A. Patil et al.
APPLIED ENERGY (2015)
A Machine Learning-Based Design Representation Method for Designing Heterogeneous Microstructures
Hongyi Xu et al.
JOURNAL OF MECHANICAL DESIGN (2015)
Multiple imaging mode X-ray computed tomography for distinguishing active and inactive phases in lithium-ion battery cathodes
Siddharth Komini Babu et al.
JOURNAL OF POWER SOURCES (2015)
Design of Bi-Tortuous, Anisotropic Graphite Anodes for Fast Ion-Transport in Li-Ion Batteries
V. Pavan Nemani et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Three-Phase Multiscale Modeling of a LiCoO2 Cathode: Combining the Advantages of FIB-SEM Imaging and X-Ray Tomography
Lukas Zielke et al.
ADVANCED ENERGY MATERIALS (2015)
Three-dimensional high resolution X-ray imaging and quantification of lithium ion battery mesocarbon microbead anodes
F. Tariq et al.
JOURNAL OF POWER SOURCES (2014)
Tortuosity Anisotropy in Lithium-Ion Battery Electrodes
Martin Ebner et al.
ADVANCED ENERGY MATERIALS (2014)
Design of Battery Electrodes with Dual-Scale Porosity to Minimize Tortuosity and Maximize Performance
Chang-Jun Bae et al.
ADVANCED MATERIALS (2013)
Validity of the Bruggeman relation for porous electrodes
Ding-Wen Chung et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
High-Throughput Computational Screening of New Li-Ion Battery Anode Materials
Scott Kirklin et al.
ADVANCED ENERGY MATERIALS (2013)
A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes
Honghe Zheng et al.
ELECTROCHIMICA ACTA (2012)
Review: An Economic Perspective on Liquid Solar Fuels
John Newman et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
An Analytical Method to Determine Tortuosity in Rechargeable Battery Electrodes
Bharath Vijayaraghavan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Multi Length Scale Microstructural Investigations of a Commercially Available Li-Ion Battery Electrode
P. R. Shearing et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Fiji: an open-source platform for biological-image analysis
Johannes Schindelin et al.
NATURE METHODS (2012)
Positive Electrode Materials for Li-Ion and Li-Batteries
Brian L. Ellis et al.
CHEMISTRY OF MATERIALS (2010)
Electrochemistry and the Future of the Automobile
Frederick T. Wagner et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2010)
Contradicting Geometrical Concepts in Pore Size Analysis Attained with Electron Microscopy and Mercury Intrusion
Beat Muench et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Effects of Various Conductive Additive and Polymeric Binder Contents on the Performance of a Lithium-Ion Composite Cathode
G. Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Comparison between potentiostatic and galvanostatic intermittent titration techniques for determination of chemical diffusion coefficients in ion-insertion electrodes
E Markevich et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2005)
Lithium batteries and cathode materials
MS Whittingham
CHEMICAL REVIEWS (2004)