Enhanced monovalent anion selectivity of poly(2,6-dimethyl-1,4-phenylene oxide)-based amphoteric ion exchange membranes having rough surface

Amphoteric polyelectrolytes have been used as the materials for the high-performance ion-exchange membranes applied in redox flow battery and electrodialysis (ED) etc. In this work, four amphoteric ion-exchange membranes (AIEMs) based on sodium 1-propanesulfonate-3-methylimidazole (MIm-PS) and 1-butylimidazole (BIm) deco-rated poly(2,6-dimethyl-1,4-phenylene oxide) have been prepared for mono-/bi-valent anion separation by using the electrodialyzer. The optimized AIEM has a low surface area resistance of 5.79 omega.cm(2). During the ED testing, at 2.5 mA.cm(-2), the perm-selectivity (P-SO4(2-Cl-) ) tested in a binary mixture of 0.05 M NaCl and 0.05 M Na2SO4, achieves the value of 16.12 at 30th min, which is significantly higher than that of anion-exchange membrane (1.68) as the reference. This superior separation performance has been further verified by the perm-selectivity of 55.5, tested in a single solution of 0.05 M NaCl or 0.05 M Na2SO4. The high perm-selectivity results from the electrostatic repulsion difference of mono-/bi-valent ions against the negatively-charged -SO(3)(- )groups, accompanying with pore-size sieving effect resulting from the smaller ion cluster space of 0.261 nm. It is interesting to find that AIEMs show the increased ion flux values of Cl-/SO42-, though the presence of the negatively-charged -SO3- groups, which is possibly related to the convex particle-like surface that increasing the effective surface area for ions passing. This work may provide a reference to guide the architectural design of advanced mono-valent anion-selective IEMs.

Automated summary

Amphoteric ion-exchange membranes have been prepared for ion separation in this study. The optimized membrane shows good separation performance and may provide guidance for the design of advanced ion-exchange membranes.