4.7 Review

Sustainable approach for valorization of solid wastes as a secondary resource through urban mining

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Environmental Sciences

Biotechnological recycling of hazardous waste PCBs using Sulfobacillus thermosulfidooxidans through pretreatment of toxicant metals: Process optimization and kinetic studies

Sadia Ilyas et al.

Summary: This study focused on improving the extraction yield of valuable metals during bioleaching of waste printed circuit boards (WPCBs) by acid pretreatment and parametric optimization. The research demonstrated the auto-catalytic behavior of Cu and the transition from chemically-controlled to diffusion-controlled mechanism in bioleaching kinetics.

CHEMOSPHERE (2022)

Review Environmental Sciences

A review on recent advancements in recovery of valuable and toxic metals from e-waste using bioleaching approach

P. R. Yaashikaa et al.

Summary: This review discusses the environmental pollution caused by printed circuit boards and the methods for recovering valuable and hazardous metals from e-wastes. It highlights the use of chemical, biological, and physical approaches for metal recovery, emphasizing the need for advanced recycling methods to address pollution challenges posed by PCBs.

CHEMOSPHERE (2022)

Article Energy & Fuels

Updates on high value products from cellulosic biorefinery

R. Reshmy et al.

Summary: Bio-based fuels and value-added materials are gaining attention as an alternative to petroleum derived fuels and chemicals. Cellulosic biorefinery offers a cost-effective way to produce a wide range of platform chemicals, biofuels, and other biomaterials using abundant lignocellulosic raw materials. Despite challenges, integrating novel technologies is essential for optimizing processing and enhancing the quality of products.
Review Agricultural Engineering

Organic solid waste: Biorefinery approach as a sustainable strategy in circular bioeconomy

Anil V. Shah et al.

Summary: Waste generation is a significant environmental concern, leading to discussions about its effects. Biorefineries and bio-based products have a crucial role in reducing emissions and supporting energy systems, but their economic viability remains a challenge. This paper thoroughly studies the concept of biorefinery in waste management, technological advancements, and the importance of techno-economic assessment. Further research is needed to find the most viable solutions. This communication is valuable for decision-makers in identifying environmentally suitable biorefinery options.

BIORESOURCE TECHNOLOGY (2022)

Article Engineering, Environmental

Forecasting plastic waste generation and interventions for environmental hazard mitigation

Yee Van Fan et al.

Summary: This study uses a neural network model to predict plastic waste generation in the EU-27 in 2030 and evaluates interventions to mitigate the environmental impact. Results show the importance of reducing plastic waste, with certain countries needing to address high amounts of untreated plastic waste per capita.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Environmental Sciences

Trends in mitigation of industrial waste: Global health hazards, environmental implications and waste derived economy for environmental sustainability

Poonam Sharma et al.

Summary: Utilizing microbes to treat industrial waste reduces environmental and health hazards while producing value-added products to enhance economic benefits. Furthermore, the research has unveiled the potential impact of industrial waste on the global environment.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Green & Sustainable Science & Technology

Governance challenges and opportunities for implementing resource recovery from organic waste streams in urban areas of Latin America: insights from Chia, Colombia

Monica Garcia Aguilar et al.

Summary: There is increasing interest in implementing circular approaches to urban sanitation and waste management worldwide. This study assesses the governance capacity to implement resource recovery from organic waste streams in Chia, Colombia, and identifies local initiatives and public participation as enabling factors while inadequate monitoring, information sharing, and awareness among stakeholders pose barriers. The results provide insights for other urban areas in low- and middle-income countries and contribute to the understanding of governance conditions necessary for implementing resource recovery in similar contexts.

SUSTAINABLE PRODUCTION AND CONSUMPTION (2022)

Article Green & Sustainable Science & Technology

Bioenergy technologies, uses, market and future trends with Austria as a case study

A. Anca-Couce et al.

Summary: The article reviews the current use and conversion technologies of bioenergy in Austria, focusing on bioheat, biofuels, and bioelectricity production. Future developments in bioheat production aim to reduce emissions, increase feedstock flexibility, and integrate with other renewables.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Engineering, Environmental

Removal of micron-scale microplastic particles from different waters with efficient tool of surface-functionalized microbubbles

Ming Zhang et al.

Summary: This study successfully demonstrated the simultaneous removal of micron-scale MP particles and DOM using the CCGA technology. The CCGAs showed high efficiency in removing PS particles and color, but the removal efficiency for PMMA was lower.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Environmental Sciences

Sorption of chemical contaminants on degradable and non-degradable microplastics: Recent progress and research trends

Fernando G. Torres et al.

Summary: This study investigated the sorption behavior of chemicals on microplastics and their impact on the environment. It was found that degradable microplastics have a higher affinity for hydrophobic contaminants, but research on degradable microplastics is still limited.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Environmental

Construction, renovation and demolition (CRD) wastes contaminated by gypsum residues: Characterization, treatment and valorization

Mohamed Amine Laadila et al.

Summary: Managing waste generated from construction, renovation, and demolition activities is a significant challenge. Recovering gypsum residues from the waste can help minimize environmental impact. Various treatment and valorization methods for the waste and extracted gypsum residues are discussed, highlighting the importance of pre-treatment and decontamination processes to improve quality. The valorization potential of the obtained gypsum can lead to reduced greenhouse gas emissions and the production of reusable by-products.

WASTE MANAGEMENT (2021)

Article Green & Sustainable Science & Technology

Constraints leading to system-level lock-ins-the case of electronic waste management in the circular economy

Anna Aminoff et al.

Summary: This study systematically examines the factors that hinder the implementation and diffusion of new closed-loop solutions and the transformation towards a circular economy, specifically in the context of waste electrical and electronic equipment (WEEE) management. The study identified three system-level lock-ins, including the national extended producer responsibility scheme, techno-economic issues, and tensions in the supply chain, which impede the adoption of innovations and the transformation of the WEEE management system. Understanding the interactions between these constraints is crucial for unlocking the system and supporting the transition to a circular economy.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Recovery of gold from waste mobile phone circuit boards and synthesis of nanomaterials using emulsion liquid membrane

Wanying Zhou et al.

Summary: In recent years, waste mobile phones have gained popularity as electronic waste, leading to serious pollution and high resource value. This study explored the application of emulsion liquid membrane for gold recovery and nanomaterial synthesis from WMPCBs, showing promising results for achieving high-value utilization of waste mobile phone secondary metal resource products.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Leaching of rare earth elements and base metals from spent NiMH batteries using gluconate and its potential bio-oxidation products

Payam Rasoulnia et al.

Summary: The study investigated leaching of rare earth elements (REEs) and base metals from spent nickel-metal-hydride (NiMH) batteries using gluconate, 2-ketogluconate and 5-ketogluconate. The results showed that gluconate had higher leaching efficiency for REEs, while 5-ketogluconate was more efficient for base metal leaching, especially at pH 3.0.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Biotechnology & Applied Microbiology

A critical review on various feedstocks as sustainable substrates for biosurfactants production: a way towards cleaner production

Swayansu Sabyasachi Mohanty et al.

Summary: The demand for a chemical surfactant substitute is driven by increased environmental awareness, with biosurfactants offering benefits such as biodegradability and biocompatibility compared to their chemical counterparts. Researchers are looking for low-cost waste materials to use as substrates to lower manufacturing costs and provide waste management services. Utilizing low-cost substrates significantly reduces the cost of producing biosurfactants, making them a more sustainable option for various industries.

MICROBIAL CELL FACTORIES (2021)

Article Biochemistry & Molecular Biology

Bioleaching of rare earth elements from spent automobile catalyst as pretreatment method to improve Pt and Pd recovery: Process optimization and kinetic study

Fariba Hosseinzadeh et al.

Summary: The study focused on the extraction of rare metals from spent automobile catalyst using Aspergillus niger. Different factors affecting the growth of A. niger were investigated, and high extraction efficiencies were achieved under specific conditions. After bioleaching, the spent residue was treated with aqua regia for platinum and palladium recovery, with 100% recovery rate. Characterization methods such as SEM, FTIR, HPLC, and XRD were used before and after bioleaching.

PROCESS BIOCHEMISTRY (2021)

Review Green & Sustainable Science & Technology

A review of the current progress in recycling technologies for gallium and rare earth elements from light-emitting diodes

R. P. de Oliveira et al.

Summary: The study focuses on recovery techniques for end-of-life LEDs, including physical processes, pyrolysis, and bioleaching, with hydrometallurgical processing identified as the most suitable method. Despite energy consumption, a first pyrometallurgical step is recommended for gallium recovery. The research highlights the need for further investigation in LED recycling technologies and the importance of selecting the appropriate recovery process based on the composition of LEDs.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Proceedings Paper Materials Science, Multidisciplinary

Optimization of solid waste management in a metropolitan city

Sumit Saxena et al.

Summary: This research aims to optimize the total cost of solid waste management by using a mixed integer linear programming model in a metropolitan city case study. The proposed model overcomes the limitations of existing work.

MATERIALS TODAY-PROCEEDINGS (2021)

Proceedings Paper Materials Science, Multidisciplinary

Analysis of plastic waste management: Utilization, issues & solutions

Gunjan et al.

Summary: Plastics have become an essential part of our daily life over the past 20 years, but the excessive use of plastics has led to a serious waste management issue. It is necessary to manage plastic waste through various methods such as recycling and reusing, while actively seeking ways to reduce waste generation.

MATERIALS TODAY-PROCEEDINGS (2021)

Review Engineering, Environmental

Mechanisms of biological recovery of rare-earth elements from industrial and electronic wastes: A review

Subhabrata Dev et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Environmental Sciences

Microplastics in aquatic environments: Occurrence, accumulation, and biological effects

Shen Xu et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Chemistry, Multidisciplinary

Degradation Rates of Plastics in the Environment

Ali Chamas et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Review Green & Sustainable Science & Technology

(Micro)plastic crisis: Un-ignorable contribution to global greenhouse gas emissions and climate change

Maocai Shen et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Environmental Sciences

Microbial remediation of micro-nano plastics: Current knowledge and future trends

Neha Tiwari et al.

ENVIRONMENTAL POLLUTION (2020)

Article Environmental Sciences

Alternative method of composting on a reclaimed municipal waste landfill in accordance with the circular economy: Benefits and risks

Magdalena Dana Vaverkova et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Review Green & Sustainable Science & Technology

Review of rare earth elements recovery from secondary resources for clean energy technologies: Grand opportunities to create wealth from waste

Rajesh Kumar Jyothi et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Environmental

Environmental life cycle assessment of textile bio-recycling - valorizing cotton-polyester textile waste to pet fiber and glucose syrup

Karpagam Subramanian et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Article Multidisciplinary Sciences

Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution

Stephanie B. Borrelle et al.

SCIENCE (2020)

Review Biotechnology & Applied Microbiology

Bioleaching: urban mining option to curb the menace of E-waste challenge

Shashi Arya et al.

BIOENGINEERED (2020)

Review Food Science & Technology

Food uses of pineapple waste and by-products: a review

Arianna Roda et al.

INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY (2019)

Review Environmental Sciences

An overview of the recent trends on the waste valorization techniques for food wastes

A. Nayak et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)

Article Engineering, Environmental

Using material flow analysis and life cycle assessment in decision support: A case study on WEEE valorization in Belgium

Steven De Meester et al.

RESOURCES CONSERVATION AND RECYCLING (2019)

Article Engineering, Environmental

Effect of biochar addition on the OFMSW composting process under real conditions

Mateusz Malinowski et al.

WASTE MANAGEMENT (2019)

Article Engineering, Environmental

Recovery of rare earths from waste cathode ray tube (CRT) phosphor powder with organic and inorganic ligands

L. Alvarado-Hernandez et al.

WASTE MANAGEMENT (2019)

Article Engineering, Environmental

Occurrence of microplastics in landfill systems and their fate with landfill age

Yinglong Su et al.

WATER RESEARCH (2019)

Article Biotechnology & Applied Microbiology

Sorption of fluorescent polystyrene microplastic particles to edible seaweed Fucus vesiculosus

Kasper Bjerrum Sundbaek et al.

JOURNAL OF APPLIED PHYCOLOGY (2018)

Article Green & Sustainable Science & Technology

Catalyzed waste engine oil as alternative binder of roofing tiles - Chemical analysis and optimization of parameters

Wei Ping Teoh et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Green & Sustainable Science & Technology

Bioleaching of indium from discarded liquid crystal displays

Mohammad Javad Jowkar et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Environmental Sciences

Bioleaching of metals from WEEE shredding dust

Alessandra Marra et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)

Article Environmental Sciences

Closing the loop on plastic packaging materials: What is quality and how does it affect their circularity?

John N. Hahladakis et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2018)

Article Engineering, Environmental

Economic evaluation of an electrochemical process for the recovery of metals from electronic waste

Luis A. Diaz et al.

WASTE MANAGEMENT (2018)

Review Environmental Sciences

Nutrient Recovery from Digestate: Systematic Technology Review and Product Classification

Celine Vaneeckhaute et al.

WASTE AND BIOMASS VALORIZATION (2017)

Review Materials Science, Multidisciplinary

Pyrometallurgical Recovery of Platinum Group Metals from Spent Catalysts

Zhiwei Peng et al.

Article Engineering, Chemical

Improving urban mining practices for optimal recovery of resources from e-waste

Fiseha Tesfaye et al.

MINERALS ENGINEERING (2017)

Review Environmental Sciences

Innovating e-waste management: From macroscopic to microscopic scales

Xianlai Zeng et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2017)

Article Multidisciplinary Sciences

Production, use, and fate of all plastics ever made

Roland Geyer et al.

SCIENCE ADVANCES (2017)

Review Agricultural Engineering

Waste biorefineries: Enabling circular economies in developing countries

A. S. Nizami et al.

BIORESOURCE TECHNOLOGY (2017)

Article Microbiology

Production of flavor compounds from olive mill waste by Rhizopus oryzae and Candida tropicalis

Onur Guneser et al.

BRAZILIAN JOURNAL OF MICROBIOLOGY (2017)

Article Materials Science, Ceramics

Preparation of hardened tiles from waste phosphogypsum by a new intermittent pressing hydration

Jun Zhou et al.

CERAMICS INTERNATIONAL (2016)

Article Green & Sustainable Science & Technology

Waste electrical and electronic equipment (WEEE) recycling for a sustainable resource supply in the electronics industry in China

Yifan Gu et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Biochemistry & Molecular Biology

Characterization of poly-3-hydroxybutyrate (PHB) produced from Ralstonia eutropha using an alkali-pretreated biomass feedstock

Ganesh D. Saratale et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)

Review Energy & Fuels

Bioconversion of food waste to energy: A review

Esra Uckun Kiran et al.

Article Business

The socially optimal recycling rate: Evidence from Japan

Thomas C. Kinnaman et al.

JOURNAL OF ENVIRONMENTAL ECONOMICS AND MANAGEMENT (2014)

Article Biotechnology & Applied Microbiology

Biotechnological conversion of waste cooking olive oil into lipid-rich biomass using Aspergillus and Penicillium strains

S. Papanikolaou et al.

JOURNAL OF APPLIED MICROBIOLOGY (2011)