Use of sheep slaughterhouse-derived struvite in the production of environmentally sustainable cement and fire-resistant wooden structures

Utilization of the struvite recovered from sheep slaughterhouse wastewater was explored for the first time in sustainable cement production and fire-resistant wooden structure design. Sheep abattoir-originated struvite precipitation process was optimized using a chemical combination of MgCl2.6H2O + NaH2PO4.2H2O, a molar ratio of Mg2+:NH4+-N:PO43--P = 1.2:1:1, a reaction pH of 9.0, an initial ammonium concentration of 240 mg NH4+N/L, and a reaction time of 15 min. Based on both American (ASTM C305-14) and Turkish (TS EN 196-1) standard methods, struvite was used in proportions of 10-30% by weight for struvite-substituted cement production. The best compressive strength values were achieved with 85.5% cement clinker (C), 4.5% gypsum (G), and 10% struvite (S) for the struvite-replaced cement (C85.5G4.5S10). According to the US EPA's greenhouse gas protocol, it was estimated that producing 10% struvite-substituted cement would result in 9.97% lower absolute CO2 emissions than producing 100% Portland cement. It was also found that slaughterhouse-derived struvite could compete with commercial water-based fire retardant solution and exhibit acceptable flame resistance behavior for wooden structures. The versatility of sheep abattoir-oriented struvite was confirmed as an environmentally sustainable and clean by-product for different structural uses.

Automated summary

This study explored the utilization of struvite recovered from sheep slaughterhouse wastewater in sustainable cement production and fire-resistant wooden structure design. The struvite precipitation process was optimized and it was found that struvite could be a potential environmentally sustainable by-product for different structural uses.