☆ 4.7 Article

Green multi-biomimetic spontaneous oil-transport microstructure and its effects on energy consumption in sustainable intermittent cutting

JOURNAL OF CLEANER PRODUCTION (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Material removal energy in ultraprecision machining of micro-lens arrays on single crystal silicon by slow tool servo

Zejia Zhao et al.

Summary: This paper investigates the evolution of material removal energy in ultraprecision machining and finds that the total material removal energy decreases with increasing feedrate, but the maximum material removal energy increases. The study also discusses the differences in material removal energy in different regions and the formation mechanism and effects of cleavage fracture.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Engineering, Mechanical

Performance of MQL and Nano-MQL Lubrication in Machining ER7 Steel for Train Wheel Applications

Kerem Yavuz Camli et al.

Summary: This study investigated the effects of different cutting parameters and cooling technologies on machining ER7 steel. The results showed that the use of MQL and nano-MQL cooling technologies significantly improved machining performance, reducing surface roughness and tool wear.

LUBRICANTS (2022)

添加到收藏夹

Article Automation & Control Systems

Holistic sustainability assessment of hybrid Al-GnP-enriched nanofluids and textured tool in machining of Ti-6Al-4V alloy

Aqib Mashood Khan et al.

Summary: The study investigates the holistic sustainability of external turning of titanium alloy under different cutting environments, finding that hybrid machining process with Al-GnP nanoparticle-based MQL assistance is more environmentally and economically sustainable compared to conventional flood-assisted machining. Results show reduced specific cumulative energy consumption, CO2 emissions, and production costs in the sustainable hybrid machining process.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Performance Assessment of Minimum Quantity Castor-Palm Oil Mixtures in Hard-Milling Operation

Binayak Sen et al.

Summary: Researchers have found limitations to the application of castor oil as a base fluid for Minimum Quantity Lubrication (MQL) due to its high viscosity, while palm oil offers better lubricity and flowability characteristics. A study showed that mixing castor oil with palm oil can enhance lubrication performance, with the optimal volume ratio determined through an integrated technique. The results demonstrated a significant reduction in surface roughness, cutting energy, and tool wear compared to using castor or palm oil alone.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Machinability improvement and sustainability assessment during machining of AISI 4140 using vegetable oil-based MQL

M. A. Makhesana et al.

Summary: The study examines the effectiveness of vegetable oil-based minimum quantity lubrication and minimum quantity solid lubricant in turning steel, showing significant improvement in machining performance compared to dry and wet machining. It demonstrates the ability to reduce surface roughness and energy consumption while achieving sustainability and energy-saving in machining.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800

Munish Kumar Gupta et al.

Summary: The research demonstrates that under sustainable machining conditions, the use of N-2 cooling can significantly reduce total machining cost, energy consumption, carbon emissions, and tool wear, while improving surface quality, which is beneficial for resource conservation and environmental protection.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Engineering, Manufacturing

Use and performance of soybean oil based bio-lubricant in reducing specific cutting energy during biomimetic machining

Xiaobin Cui et al.

Summary: Soybean oil, as a bio-lubricant, has important application value in the industry, especially in reducing energy consumption when integrated with biomimetics and machining technology. Properly designed and prepared soybean oil based bio-lubricant is expected to further decrease energy consumption in biomimetic machining. The combination of ESBO/SBO volume ratio and the element area of the tool surface bio-inspired microstructure has a significant impact on reducing specific cutting energy.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Effects of bio-inspired integration of laser-induced microstructure and coated cemented carbide on tool performance in green intermittent turning

Xiaobin Cui et al.

Summary: The integration of laser-induced microstructure and coated cemented carbide material through biomimetics has been shown to enhance tool performance in green intermittent turning. The study identified the optimal combination of parameters for different cutting processes, and the proposed bio-inspired integration method effectively improved tool performance.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Review Automation & Control Systems

A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process

Munish Kumar Gupta et al.

Summary: This paper reviews common and advanced MQL systems used in grinding operations, and outlines the effects of MQL and other cutting parameters on various aspects such as cutting forces, surface roughness, tool wear, and temperature. The paper also addresses the recent trend in cooling systems for the grinding process.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

The effect of laser micro-scale textured tools on the tool-chip interface performance and surface integrity during austenitic stainless-steel turning

Yassmin Seid Ahmed et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Sustainability-based performance evaluation of hybrid nanofluid assisted machining

Aqib Mashood Khan et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Sustainability and machinability improvement of Nimonic-90 using indigenously developed green hybrid machining technology

Navneet Khanna et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Engineering, Mechanical

Wear behaviour of TiAlN coated solid carbide end-mill under alumina enriched minimum quantity palm oil-based lubricating condition

Binayak Sen et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Automation & Control Systems

Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti-6Al-4V

Muhammad Jamil et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V

Mozammel Mia et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

A multi-criteria approach for comparison of environmental assessment methods in the analysis of the energy efficiency in agricultural production systems

Cristian Mendez Rodriguez et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Engineering, Manufacturing

Study on the surface quality of CFRP machined by micro-textured milling tools

Yadong Chen et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Thermodynamics

Energy modeling method of machine-operator system for sustainable machining

Shun Jia et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Agricultural Engineering

Analysis of volume ratio of castor/soybean oil mixture on minimum quantity lubrication grinding performance and microstructure evaluation by fractal dimension

Shuming Guo et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

The importance of environmental education in the determinants of green behavior: A meta-analysis approach

Laura Varela-Candamio et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials

Yaogang Wang et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Performance of cutting tools with dimple textured surfaces: A comparative study of different texture patterns

Tatsuya Sugihara et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils

Yaogang Wang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Engineering, Industrial

Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation

Johannes Kuemmel et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Bio-inspired scale-like surface textures and their tribological properties

Christian Greiner et al.

BIOINSPIRATION & BIOMIMETICS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel

Youqiang Xing et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)

添加到收藏夹

Article Physics, Applied

Spontaneous movement of water droplets on patterned Cu and Al surfaces with wedge-shaped gradients

M. H. Alheshibri et al.

APPLIED PHYSICS LETTERS (2013)

添加到收藏夹

Article Engineering, Industrial

Highly wear-resistant cutting tools with textured surfaces in steel cutting

Toshiyuki Enomoto et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Manufacturing

Micro-grinding of Micro-groove Array on Tool Rake Surface for Dry Cutting of Titanium Alloy

Jin Xie et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)

添加到收藏夹

Article Automation & Control Systems

Analytical prediction of cutting forces in orthogonal cutting using unequal division shear-zone model

Binglin Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)

添加到收藏夹

Review Engineering, Manufacturing

Energy consumption reduction technology in manufacturing - A selective review of policies, standards, and research

Cheol-Woo Park et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2009)

添加到收藏夹

Article Engineering, Mechanical

Friction modelling in metal cutting

THC Childs

WEAR (2006)

添加到收藏夹

Article Engineering, Mechanical

Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling

A Molinari et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.