☆ 4.7 Article

Corrosion behavior and mechanical properties of Vit1 metallic glasses prepared at different cooling rates

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Formation ability, thermal stability, and mechanical properties of the Zr50Cu34Al8Ag8 amorphous alloys prepared by different mold materials

Shan Zhang et al.

Summary: In this study, the influence of cooling capacity on the properties of amorphous alloy samples was analyzed. The experimental results showed that the highest glass-forming ability was achieved with a copper mold, and the amorphous alloy obtained by suction casting with a high-purity graphite mold exhibited good thermal stability and mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Engineering, Industrial

Effect of cooling rate on fluidity and glass-forming ability of Zr-based amorphous alloys using different molds

Feilong Wang et al.

Summary: The study systematically investigated the effect of cooling rate on fluidity and glass-forming ability of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 amorphous alloy, showing that the cooling capacity of the mold is the main factor influencing the flow length of the amorphous alloy melt, and the mold material has a certain influence on the glass-forming ability of the amorphous alloy.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Investigation of the Structural Heterogeneity and Corrosion Performance of the Annealed Fe-Based Metallic Glasses

Dandan Liang et al.

Summary: This study investigated the effects of annealing at different temperatures on the structural heterogeneity, mechanical property, electrochemical behavior, and passive film characteristics of Fe-Cr-Mo-W-C-B-Y metallic glasses (MGs). Results showed that annealing below the glass transition temperature enhanced corrosion resistance by forming a protective passive film, while annealing in the supercooled liquid region led to destabilized passive film and deteriorated corrosion resistance. Structural heterogeneity plays a crucial role in tuning the corrosion performance of MGs.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect on microstructure and plastic deformation behavior of a Zr-based amorphous alloy by cooling rate control

Feilong Wang et al.

Summary: This study investigated the effect of different cooling rates on the microstructure and compression deformation behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 amorphous alloys, revealing the appearance of trace nanocrystals with decreased cooling rates and their impact on plasticity. The amount of free volume was found to mainly affect the plasticity of the amorphous alloy, while the elastic strain, yield strength, and compressive strength marginally changed with cooling rate, and plastic strain gradually increased. The study provides insights into how cooling rate influences the properties of amorphous alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

An abnormal correlation between electron work function and corrosion resistance in Ti-Zr-Be-(Ni/Fe) metallic glasses

Jia-Lun Gu et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Novel corrosion behaviours of the annealing and cryogenic thermal cycling it treated Ti-based metallic glasses

Jialun Gu et al.

INTERMETALLICS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Sub-T-g Annealing on the Corrosion Resistance of the Cu-Zr Amorphous Alloys

Sang-Soo Shin et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Comparison of corrosion behaviors between Ti-based bulk metallic glasses and its composites

Y. J. Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Electrochemistry

Effect of Yttrium Addition on Corrosion Resistance of Zr-based Bulk Metallic Glasses in NaCl Solution

Liusi Yu et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Pitting resistivity of Ni-based bulk metallic glasses in chloride solution

Khadijah M. Emran et al.

RSC ADVANCES (2017)

添加到收藏夹

Review Engineering, Biomedical

Recent advances in bulk metallic glasses for biomedical applications

H. F. Li et al.

ACTA BIOMATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behavior of Cr-based bulk metallic glasses in hydrochloric acid solutions

J. J. Si et al.

CORROSION SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Preparation and characterization of the structure and corrosion behavior of wedge mold cast Fe43.2Co28.8B19.2Si4.8Nb4 bulk amorphous alloy

Carlos Triveno Rios et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Chemistry, Physical

Ti-Cu-Zr-Fe-Sn-Si-Sc bulk metallic glasses with good mechanical properties for biomedical applications

Ying Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Chemistry, Physical

High-strength and ductile (Ti-Ni)-(Cu-Zr) crystalline/amorphous composite materials with superelasticity and TRIP effect

Andrey A. Tsarkov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Materials Science, Ceramics

Effect of annealing on the microstructure, microhardness, and corrosion resistance of Ni62Nb33Zr5 metallic glass and its composites

Ke Zhang et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)

添加到收藏夹

Article Materials Science, Biomaterials

Improvement of bio-corrosion resistance for Ti42Zr40Si15Ta3 metallic glasses in simulated body fluid by annealing within supercooled liquid region

C. H. Huang et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of annealing below the crystallization temperature on the corrosion behavior of Al-Ni-Y metallic glasses

R. Jindal et al.

CORROSION SCIENCE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pronounced tensile plasticity at room temperature in a Au65Cu10.5Ag7.5Si17 metallic glass

J. C. Qiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Bulk metallic glass composite with good tensile ductility, high strength and large elastic strain limit

Fu-Fa Wu et al.

SCIENTIFIC REPORTS (2014)

添加到收藏夹

Article Engineering, Biomedical

A Ni-free ZrCuFeAlAg bulk metallic glass with potential for biomedical applications

Yan Liu et al.

ACTA BIOMATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interactions between mechanically generated defects and corrosion phenomena of Zr-based bulk metallic glasses

A. Gebert et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

The pitting corrosion behavior of shear bands in a Zr-based bulk metallic glass

X. P. Nie et al.

SCRIPTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of different annealing atmospheres on crystallization and corrosion resistance of Al86Ni9La5 amorphous alloy

G. H. Li et al.

MATERIALS CHEMISTRY AND PHYSICS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Size-dependent shear fracture and global tensile plasticity of metallic glasses

F. F. Wu et al.

ACTA MATERIALIA (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Free-volume-induced enhancement of plasticity in a monolithic bulk metallic glass at room temperature

L. Y. Chen et al.

SCRIPTA MATERIALIA (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Plasticity of a TiCu-based bulk metallic glass: Effect of cooling rate

J. Shen et al.

JOURNAL OF MATERIALS RESEARCH (2007)

添加到收藏夹

Article Chemistry, Physical

Localized corrosion behavior of a zirconium-based bulk metallic glass relative to its crystalline state

WH Peter et al.

INTERMETALLICS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.