4.7 Article

Twinning and dynamic recrystallization behaviors during inchoate deformation of pre-twinned AZ31 Mg alloy sheet at elevated temperatures

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Effects of pretwins on texture and microstructural evolutions of AZ31 magnesium alloy during high temperature deformation

S. M. Fatemi et al.

Summary: The study investigated the effects of pretwins on the flow behavior, microstructure, and texture evolution of a rolled AZ31 magnesium alloy during hot deformation. It was found that pretwins influenced texture reorientation and dynamic recrystallization, leading to changes in flow behavior and microstructure along different directions.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

Mechanical behavior and microstructure evolution of AZ31 magnesium alloy sheet in an ultrasonic vibration-assisted hot tensile test

Juan Liao et al.

Summary: This study conducted ultrasonic vibration-assisted hot deformation experiments on AZ31 magnesium alloy sheets, revealing significant effects on mechanical properties and microstructural evolution, such as delayed occurrence of dynamic recrystallization and accelerated continuous dynamic recrystallization leading to improved material ductility.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

A strategy to regulate the microstructure and properties of Mg-2.0Zn-1.5Mn magnesium alloy by tracing the existence of Mn element

Peng Peng et al.

Summary: The study investigated the impact of four different Mn existence types on the microstructure and mechanical properties of an extruded Mg-2.0Zn-1.5Mn magnesium alloy. It was found that each type of Mn existence had varying effects on grain refinement and mechanical properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Materials Science, Multidisciplinary

Effect of Ce addition on hot deformation behavior and microstructure evolution of AZ80 magnesium alloy

Zhu-Jin Li et al.

Summary: The addition of Ce has significant effects on the hot deformation behavior and microstructure evolution of AZ80 magnesium alloys. The presence of Ce increases the peak stress and weakens the texture of the AZ80-Ce alloy, while promoting recrystallization and reducing dislocation density.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Article Chemistry, Physical

Effect of deformation modes on continuous dynamic recrystallization of extruded AZ31 Mg alloy

Weiying Huang et al.

Summary: Uniaxial compression experiments were conducted on AZ31 magnesium alloy at different temperatures and strain rates to investigate deformation modes and dynamic recrystallization behavior. A unified constitutive equation was established for different initial textures, and activation energies for different samples were determined. The role of prismatic slips and kink bands in the recrystallization process was discussed for the first time, leading to improvements in strength and ductility.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

Effect of Sm on dynamic recrystallization of Mg-8Gd-0.5Zr alloy during hot compression

Limin Zhu et al.

Summary: The addition of Sm reduces the critical strain of dynamic recrystallization during hot compression, making the Mg-8Gd-3Sm-0.5Zr alloy more prone to recrystallization and producing more dynamic precipitates that refine the recrystallized grains. The dynamic recrystallization mechanism of the Mg-8Gd-3Sm-0.5Zr alloy involves continuous dynamic recrystallization (CDRX) and particle stimulated nucleation (PSN).

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Role of second phases and grain boundaries on dynamic recrystallization behavior in ZK60 magnesium alloy

Peng Peng et al.

Summary: This study investigates the influence of initial grain boundaries, primary particles, and precipitates on dynamic recrystallization behavior and microstructure in Mg-6.0Zn-0.5Zr (ZK60) alloy. The findings demonstrate that initial grain boundaries and particles can promote DRX nucleation, while precipitates can hinder grain boundary migration, affecting grain growth.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

A good combination of ductility, strength, and corrosion resistance of fine-grained ZK60 magnesium alloy produced by repeated upsetting process for biodegradable applications

N. Fakhar et al.

Summary: The study found that the application of the Repeated Upsetting (RU) process resulted in significant changes in the fine-grained structure and texture of the ZK60 magnesium alloy, leading to improved strength and ductility but decreased corrosion resistance. The sample processed by 3 passes showed a good combination of acceptable strength, ductility, and corrosion resistance, making it suitable for implant applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Revealing the tensile anisotropy, tension-compression asymmetry, and strain-hardening behavior of a high-performance Mg-Gd-Ag alloy

Zhenquan Yang et al.

Summary: The mechanical behavior of a high-performance Mg-10.6Gd-2Ag alloy fabricated by equal-channel angular pressing (ECAP) was systematically investigated in this study. The alloy exhibited high strength, ductility, near-symmetric yield response, and low anisotropy. The evolution of microstructure and texture played a significant role in influencing the mechanical properties of the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Engineering, Mechanical

Strain hardening, twinning and texture evolution in magnesium alloy using the all twin variant polycrystal modelling approach

Sudeep K. Sahoo et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Materials Science, Multidisciplinary

Influence of twinning-induced recrystallization on texture evolution in a high strain rate compressed Mg-Zn alloy

Yuxuan Liu et al.

MATERIALS CHARACTERIZATION (2020)

Article Materials Science, Multidisciplinary

Variation in dynamic deformation behavior and resultant yield asymmetry of AZ80 alloy with extrusion temperature

Sang-Hoon Kim et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Nanoscience & Nanotechnology

Effect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperature

Dabiao Xia et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Chemistry, Physical

Processing maps of extruded AZ80+0.4% Ce magnesium alloy

Yongbiao Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Physical

Strength-ductility combination of fine-grained magnesium alloy with high deformation twin density

F. Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Nanoscience & Nanotechnology

Effect of pre-existing {10(1)over-bar2} extension twins on mechanical properties, microstructure evolution and dynamic recrystallization of AZ31 Mg alloy during uniaxial compression

Hua Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Engineering, Industrial

Enhanced stretch formability of AZ31 magnesium alloy thin sheet by pre-crossed twinning lamellas induced static recrystallizations

Weili Cheng et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Article Engineering, Mechanical

Transition of dynamic recrystallization mechanisms of as-cast AZ31 Mg alloys during hot compression

C. Xie et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2018)

Article Chemistry, Physical

VPSC-TDT modeling and texture characterization of the deformation of a Mg-3Al-1Zn plate

LingYu Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Materials Science, Multidisciplinary

Effect of Sn addition on the microstructure and deformation behavior of Mg-3Al alloy

Byeong-Chan Suh et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Intragranular twinning, detwinning, and twinning-like lattice reorientation in magnesium alloys

Wei Wu et al.

ACTA MATERIALIA (2016)

Article Materials Science, Multidisciplinary

Twinning effects on the hot deformation behavior of AZ31 Mg alloy

Yuanli Chen et al.

MATERIALS CHARACTERIZATION (2016)

Article Materials Science, Multidisciplinary

Influence of basal slip activity in twin lamellae on mechanical behavior of Mg alloys

Bo Song et al.

MATERIALS LETTERS (2016)

Article Nanoscience & Nanotechnology

Dynamic microstructural evolution in Mg-4Zn-2Al-2Sn alloy during hot deformation

Dongqing Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Review Materials Science, Multidisciplinary

A review of dynamic recrystallization phenomena in metallic materials

K. Huang et al.

MATERIALS & DESIGN (2016)

Article Chemistry, Physical

Texture evolution of rolled Mg-3Al-1Zn alloy undergoing a {10-12} twinning dominant strain path change

Sung Hyuk Park et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Nanoscience & Nanotechnology

Hot deformation and dynamic recrystallization behaviors of Mg-Gd-Y-Zr alloy

H. C. Xiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Materials Science, Multidisciplinary

Optimum parameters and kinetic analysis for hot working of a homogenized Mg-8Sn-1Al-1Zn alloy

Weili Cheng et al.

MATERIALS & DESIGN (2015)

Article Chemistry, Physical

Influence of yttrium content on phase formation and strain hardening behavior of Mg-Zn-Mn magnesium alloy

N. Tahreen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Article Nanoscience & Nanotechnology

Detwinning behavior of Mg-3Al-1Zn alloy at elevated temperatures

Huihui Yu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Nanoscience & Nanotechnology

An investigation of dynamic recrystallization behavior of ZK60-Er magnesium alloy

Jing Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Nanoscience & Nanotechnology

Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression

Hua Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Review Materials Science, Multidisciplinary

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

Taku Sakai et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Article Engineering, Mechanical

A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms

H. Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

Article Materials Science, Multidisciplinary

Microstructures and tensile properties of Mg-Gd-Y-Zr alloy during multidirectional forging at 773 K

Liechong Tang et al.

MATERIALS & DESIGN (2013)

Article Materials Science, Multidisciplinary

Microstructure and texture of coarse-grained Mg-Gd-Y-Nd-Zr alloy after hot compression

Xiangsheng Xia et al.

MATERIALS & DESIGN (2013)

Article Nanoscience & Nanotechnology

Enhancing the strength of rolled ZK60 alloys via the combined use of twinning deformation and aging treatment

Bo Song et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Nanoscience & Nanotechnology

Enhanced stretch formability of rolled Mg-3Al-1Zn alloy at room temperature by initial {10-12} twins

Sung Hyuk Park et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Nanoscience & Nanotechnology

Improving the mechanical properties of extruded Mg-3Al-1Zn alloy by cold pre-forging

Sung Hyuk Park et al.

SCRIPTA MATERIALIA (2013)

Article Nanoscience & Nanotechnology

The deformation behaviour of the magnesium alloy AZ80 at 77 and 293 K

J. Jain et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Materials Science, Multidisciplinary

Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals

Adrien Chapuis et al.

ACTA MATERIALIA (2011)

Article Materials Science, Multidisciplinary

Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates

I. Ulacia et al.

ACTA MATERIALIA (2010)

Article Materials Science, Multidisciplinary

Distribution Characteristics of In-Grain Misorientation Axes in Cold-Rolled Commercially Pure Titanium and Their Correlation with Active Slip Modes

Y. B. Chun et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)

Article Nanoscience & Nanotechnology

Twinning and the ductility of magnesium alloys Part I: Tension twins

M. R. Barnett

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Article Nanoscience & Nanotechnology

Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet

A. Jain et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Article Materials Science, Multidisciplinary

The role of twinning and untwinning in yielding behavior in hot-extruded Mg-Al-Zn alloy

Y. N. Wang et al.

ACTA MATERIALIA (2007)