4.7 Article

Electrodeposition of silane/reduced graphene oxide nanocomposite on AA2024-T3 alloy with enhanced corrosion protection, chemical and mechanical stability

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Effects of pre- and post-friction surfacing heat treatment on microstructure and corrosion behavior of nickel-aluminide reinforced Al-Cu-Mg alloy

Ramezanali Farajollahi et al.

Summary: This research investigates the effect of pre-heat treatment of mechtrod and post-processing heat treatment of coating on the microstructure and corrosion behavior of nickel-aluminide reinforced Al-Cu-Mg alloy coating. The results demonstrate that the presence of nickel-aluminide reinforcement does not significantly impact the coating efficiency under similar heat treatment conditions. Nickel-aluminide acts as a barrier to grain growth and prevents abnormal grain growth. After aging heat treatment, the presence of nickel-aluminide reduces the formation of S-Al2CuMg precipitates. The corrosion resistance of the nickel-aluminide containing coating is significantly higher than the Al-Cu-Mg alloy substrate and nickel-aluminide free coating.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Multidisciplinary

Effect of Electrolytic Medium on the Electrochemical Reduction of Graphene Oxide on Si(111) as Probed by XPS

Andrea G. Marrani et al.

Summary: The wafer-scale integration of graphene holds great importance in its various proposed and ongoing applications. By carefully selecting chemical environment and electrochemical conditions, a more controlled and tunable graphene-Si(111) interface can be achieved.

NANOMATERIALS (2022)

Article Engineering, Environmental

A superhydrophobic TPU/CNTs@SiO2 coating with excellent mechanical durability and chemical stability for sustainable anti-fouling and anti-corrosion

Yubo Liu et al.

Summary: In this study, a superhydrophobic coating with excellent mechanical durability and chemical stability was successfully prepared by in-situ growing SiO2 particles on the surface of carbon nanotubes and modifying them with thermoplastic polyurethane matrix. The coating has multi-level micro/nanostructures and strong bonding, which prevent the adhesion of contaminants on the coating surface and in liquids, and also exhibit self-cleaning and anti-fouling properties.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Coatings & Films

An environmental friendly self-healing coating with Silane/Ce-ZSM-5 zeolite structure for corrosion protection of aluminum alloy

Juan Du et al.

Summary: This paper investigated the preparation of a new environmentally friendly, pH stimulation response nanocontainer enhanced, self-healing, and efficient anti-corrosion coating. The experimental results showed that the prepared coating exhibited excellent corrosion protection and self-healing ability.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Chemistry, Physical

Controllable preparations and anti-corrosion properties of reduced graphene oxide films by binder-free electrophoretic deposition

Yu Gao et al.

Summary: The study demonstrates that reduced graphene oxide film deposited on copper by a binder-free electrophoretic deposition method has better corrosion resistance compared to graphene oxide film, but the corrosion resistance of the rGO film is influenced by the reduction ratio.

APPLIED SURFACE SCIENCE (2021)

Article Electrochemistry

Electroreduction of Perchlorinated Silanes for Si Electrodeposition

Nathanael Downes et al.

Summary: The electrochemical reactivity and suitability of hexachlorodisilane and tetrakis(trichlorosilyl)silane as Si ec-LLS electrodeposition precursors were investigated. Perchlorinated silanes exhibit similar electrochemical responses as SiCl4, but with low faradaic efficiency, and the anion in the supporting electrolyte affects the stability of the precursor solution.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Electrochemical behavior and corrosion mechanism of anodized 7B04 aluminum alloy in acid NaCl environments

Yangguang Zhang et al.

Summary: The electrochemical behavior and corrosion mechanism of anodized 7B04 aluminum alloy under acid NaCl immersion and salt spray tests were studied, showing that sealing treatment improves the corrosion resistance of the anodic film, and the corrosion severity varies in different corrosive environments.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Review Materials Science, Multidisciplinary

Review on the corrosion-promotion activity of graphene and its inhibition

Wen Sun et al.

Summary: Graphene films and graphene-reinforced nanocomposite coatings have attracted significant attention for corrosion protection due to their chemical inertness and impermeability to aggressive chemicals. However, the potential for high corrosion-promotion activity in graphene-based metal protectors presents a challenge that researchers are actively working to address for future applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

Precipitation-hardness map for Al-Cu-Mg alloy (AA2024-T3)

V. A. Esin et al.

Summary: The precipitation map of Al-Cu-Mg alloy (AA2024-T3) was obtained by combining differential scanning calorimetry analysis and high-resolution transmission electron microscopy observations, revealing the appearance of equilibrium S-Al2CuMg phase at 85 degrees C after 1000 h of ageing. Hardness values showed that the maximum hardness was located at the boundary between S-phase + GPB zones and S-phase regions for all studied temperatures.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Influence of post-treatment process on corrosion and wear properties of PEO coatings on AM50 Mg alloy

Chang Liu et al.

Summary: In this study, post-treatment process was utilized to enhance the corrosion and wear resistance of PEO coatings, with sol-gel and epoxy layers effectively sealing open pores to improve coating performance. The hybrid coatings with epoxy layer showed superior corrosion and wear resistance, especially with longer dipping time during post-treatment generating denser coatings with superior properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Coatings & Films

Improved performance of Ti-based conversion coating in the presence of Ce/Co ions: Surface characterization, electrochemical and adhesion study

Shamim Roshan et al.

Summary: Novel chromium-free conversion coatings based on titanium-cerium (Ti/Ce-CC) and titanium-cobalt (Ti/Co-CC) were prepared to enhance anti-corrosion resistance and adhesion property. The addition of cerium and cobalt ions changed the morphology of Ti-CC, with oxide and hydroxide forms of different valence ions existing on the surface. Ti/Ce-CC showed significant enhancement in anti-corrosion resistance and better performance in salt spray test and adhesion strength compared to Ti/Co-CC, Ti-CC, and bare coated samples.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Coatings & Films

Silane-based coating charged with TiO2 NPs for dental implant applications

M. Lepicka et al.

Summary: To enhance the long-term stability of a dental implant, a protective coating containing TiO2 nanoparticles is proposed for selected parts using GPTMS/TEOS sol-gel coating. This coating effectively improves the anti-loosening properties of the abutment screw and achieves high locking efficacy and anti-wear performance due to its advantageous mechanical properties. The incorporation of TiO2 NPs in the polymeric backbone of the coating improves resistance to hydrolytic degradation and reduces hardness and Young modulus.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Durable Superhydrophobic Wood via One-Step Immersion in Composite Silane Solution

Junfei Ou et al.

Summary: The research team successfully achieved one-step fabrication of superhydrophobic wood without nanoparticles, imparting wood with superhydrophobicity using a composite silane solution. After long-term testing, the wood demonstrated excellent water/moisture repellency in various environmental conditions.

ACS OMEGA (2021)

Article Nanoscience & Nanotechnology

Elucidating the Mechanism of Condensation-Mediated Degradation of Organofunctional Silane Self-Assembled Monolayer Coatings

Ruisong Wang et al.

Summary: Research investigates the mechanism of organofunctional silane SAM coating degradation during water vapor condensation and finds that coatings prepared in a dry environment exhibit superior long-term robustness.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Homogeneously Dispersed Graphene Nanoplatelets as Long-Term Corrosion Inhibitors for Aluminum Matrix Composites

Yuming Xie et al.

Summary: Deformation-driven metallurgy was used to prepare graphene nanoplatelet-reinforced aluminum matrix composites, resulting in enhanced corrosion resistance through severe plastic deformation and homogeneously dispersed graphene nanoplatelets. The formation of a carbon-doped protective film in a chloride-containing environment contributed to the great corrosion inhibition mechanism of the composites.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Multidisciplinary

Enhancing the corrosion resistance of aluminum by superhydrophobic silane/graphene oxide coating

X. Q. Du et al.

Summary: A superhydrophobic silane/graphene oxide composite coating was synthesized on aluminum surface through a facile dipping and curing process. The surface characterization and electrochemical tests demonstrated that the coating exhibited excellent anti-corrosion properties.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)

Article Chemistry, Physical

Fluorinated graphene film for corrosion control on copper: Experimental and theoretical studies

Yangmin Wu et al.

Summary: Fluorination treatment enhances the corrosion protection performance of graphene film, as evidenced by electrochemical impedance spectroscopy and corrosion morphologies. The fluorine atoms bonding with carbon elements inhibit the passage of corrosion-related molecules through the film, resulting in long-term anti-corrosion capability.

CARBON (2021)

Article Chemistry, Physical

ANTICORROSION AND REPAIR BEHAVIOR OF REC-SiO2 SILANE FILM ON CARBON STEEL

Jiabin Tang et al.

Summary: The research focused on the synergistic effect of Ce3+ and SiO2 nanoparticles composite silane film on the corrosion resistance of carbon steel. The preparation method, surface characteristics, and chemical structure analysis of the silane film under different conditions were studied and proved the good corrosion resistance and self-healing performance of the cerium-containing silane film.

SURFACE REVIEW AND LETTERS (2021)

Article Materials Science, Multidisciplinary

Investigation of Silane Impregnation for Protection of Alkali-Activated Slag Mortar

Jin Li et al.

Summary: The study showed that silane impregnation can improve the protective properties of AAS mortars by transforming the surface from hydrophilic to hydrophobic, reducing water absorption, and increasing penetration depth. The optimal coating method is two-layer coating with a recommended silane dosage of 200 g/m2.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Corrosion resistance of a superhydrophobic dodecyltrimethoxysilane coating on magnesium alloy AZ31 fabricated by one-step electrodeposition

Sheng-Jian Zhang et al.

Summary: A superhydrophobic and corrosion-resistant coating with hierarchical macro/nanostructures was successfully fabricated on Mg alloy AZ31 through one-step electrodeposition of dodecyltrimethoxysilane (e-DTMS) in a relatively wet media. The coating showed excellent self-cleaning performance and chemical stability, significantly enhancing the anti-corrosion properties of the AZ31 alloy.

NEW JOURNAL OF CHEMISTRY (2021)

Article Materials Science, Ceramics

Multivariable analysis of electrodeposited silane based superhydrophobic coatings for corrosion protection of carbon steel

Gabriel Batalha Leoni et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Effect of functionalized graphene oxide concentration on the corrosion resistance properties provided by cataphoretic acrylic coatings

Massimo Calovi et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Article Chemistry, Physical

Cement based superhydrophobic coating with excellent robustness and solar reflective ability

Fajun Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Review Materials Science, Multidisciplinary

Superhydrophobic coatings for corrosion protection of magnesium alloys

Wenhui Yao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Engineering, Electrical & Electronic

Electromechanical performance of polydimethylsiloxane containing reduced graphene oxide grafted by long-chain alkyl silane

Mohsen Sadroddini et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Chemistry, Physical

Corrosion resistance performance of the self-assembled reduction of graphene/silane composite films

Yuqing Wen et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Article Materials Science, Multidisciplinary

Electrodeposition of Co-Ni-P/graphene oxide composite coating with enhanced wear and corrosion resistance

Cansen Liu et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Article Materials Science, Multidisciplinary

Characterization of Hydrophobic Silane Film Deposited on AISI 304 Stainless Steel for Corrosion Protection

E. T. Akinlabi et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

Article Chemistry, Physical

Enhancement of anticorrosion property of 304 stainless steel using silane coatings

Sultan Akhtar et al.

APPLIED SURFACE SCIENCE (2018)

Article Engineering, Environmental

Polydopamine coated graphene oxide for anticorrosive reinforcement of water-borne epoxy coating

Mingjun Cui et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Physical

An all-water-based system for robust superhydrophobic surfaces

Mingming Liu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Article Materials Science, Multidisciplinary

Electrochemical noise analysis on the pit corrosion susceptibility of biodegradable AZ31 magnesium alloy in four types of simulated body solutions

Changgang Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Article Chemistry, Multidisciplinary

Facile silane functionalization of graphene oxide

Syeda S. Abbas et al.

NANOSCALE (2018)

Article Nanoscience & Nanotechnology

Totally Waterborne, Nonfluorinated, Mechanically Robust, and Self-Healing Superhydrophobic Coatings for Actual Anti-Icing

Yabin Li et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Engineering, Chemical

In-situ monitoring the inhibition effect of benzotriazole on copper corrosion by electrochemical noise technique

Y. Chen et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Article Materials Science, Coatings & Films

Superhydrophobic coating with multiscale structure based on crosslinked silanized polyacrylate and nanoparticles

Benfeng Zhu et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Materials Science, Coatings & Films

Insight into the anti-corrosion performance of electrodeposited silane/nano-CeO2 film on carbon steel

Chengdong Chen et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Chemistry, Physical

Inorganic adhesives for robust, self-healing, superhydrophobic surfaces

Mingming Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Preparation and characterization of a GPTMS/graphene coating on AA-2024 alloy

Yuchao Dun et al.

APPLIED SURFACE SCIENCE (2017)

Article Chemistry, Physical

Preparation and properties of acrylic resin coating modified by functional graphene oxide

Rui Dong et al.

APPLIED SURFACE SCIENCE (2016)

Article Electrochemistry

Corrosion Protective Properties of Silane Functionalized Graphene Oxide Film on AA2024-T3 Aluminum Alloy

Bing Xue et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

Electrophoretic Deposition of Graphene Oxide on Aluminum: Characterization, Low Thermal Annealing, Surface and Anticorrosive Properties

Samira Naghdi et al.

BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN (2015)

Article Materials Science, Multidisciplinary

Advantage of Super-hydrophobic Surface as a Barrier against Atmospheric Corrosion Induced by Salt Deliquescence

Peng Wang et al.

CORROSION SCIENCE (2015)

Article Multidisciplinary Sciences

Robust self-cleaning surfaces that function when exposed to either air or oil

Yao Lu et al.

SCIENCE (2015)

Article Materials Science, Multidisciplinary

Corrosion protection of mild steel by one-step electrodeposition of superhydrophobic silica film

Lian-Kui Wu et al.

CORROSION SCIENCE (2014)

Article Chemistry, Physical

Spray-coating of superhydrophobic aluminum alloys with enhanced mechanical robustness

Youfa Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)

Article Chemistry, Physical

Direct electro-deposition of graphene from aqueous suspensions

Matthias Hilder et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Article Materials Science, Multidisciplinary

Stable pit formation on AA2024-T3 in a NaCl environment

A. Boag et al.

CORROSION SCIENCE (2010)

Article Chemistry, Physical

Covalent functionalization of chemically converted graphene sheets via silane and its reinforcement

Huafeng Yang et al.

JOURNAL OF MATERIALS CHEMISTRY (2009)

Article Materials Science, Coatings & Films

Corrosion protective properties of nanostructured sol-gel hybrid coatings to AA2024-T3

ML Zheludkevich et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Article Chemistry, Analytical

Analysis of pitting corrosion behavior of pure Al in sodium chloride solution with the wavelet technique

C Cai et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2005)