相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Optimizing microstructure, shrinkage defects and mechanical performance of ZL205A alloys via coupling travelling magnetic fields with unidirectional solidification
Lei Luo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Optimizing the microstructures and mechanical properties of Al-Cu-based alloys with large solidification intervals by coupling travelling magnetic fields with sequential solidification
Lei Luo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Understanding the refinement of grains in laser surface remelted Al-Cu alloys
M. N. Patel et al.
SCRIPTA MATERIALIA (2020)
Enhancement of mechanical properties of Tb0.27Dy0.73Fe1.95 alloy by directional solidification in high magnetic field
Meng Dong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Influence of the low voltage pulsed magnetic field on the columnar-to-equiaxed transition during directional solidification of superalloy K4169
Kuiliang Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
The accelerating nanoscale Kirkendall effect in Co films-native oxide Si (100) system induced by high magnetic fields
Yue Zhao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Iron-rich intermetallics in high pressure die cast A383 aluminum alloys
Tao Liu et al.
INTERMETALLICS (2020)
A novel heat-resistant Al-Si-Cu-Ni-Mg base material synergistically strengthened by Ni-rich intermetallics and nano-AlNp microskeletons
Kaiqi Hu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of minor Sc and Fe co-addition on the microstructure and mechanical properties of Al-Cu alloys during homogenization treatment
Y. H. Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure evolution and properties of rapidly solidified Au-20Sn eutectic solder prepared by single-roll technology
Shengfa Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhanced strength and ductility of A356 alloy due to composite effect of near-rapid solidification and thermo-mechanical treatment
X. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of heat treatment for enhancing performance of Al-5Ti-1B master alloy on mechanical and hot tearing properties of Al-7Si-3Cu alloy
Sachin Kumar Rathi et al.
MATERIALS RESEARCH EXPRESS (2019)
Effect of δ-Al3CuNi phase and thermal exposure on microstructure and mechanical properties of Al-Si-Cu-Ni alloys
Lijie Zuo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of magnetic field on microstructure and mechanical properties of austempered 70Si3MnCr steel
Bilal Nawaz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Directional solidification of gallium under time-dependent magnetic fields with in situ measurements of the melt flow and the solid-liquid interface
N. Thieme et al.
JOURNAL OF CRYSTAL GROWTH (2019)
Precipitation during high temperature aging of Al-Cu alloys: A multiscale analysis based on first principles calculations
H. Liu et al.
ACTA MATERIALIA (2019)
Numerical and experimental study of the traveling magnetic field effect on the horizontal solidification in a rectangular cavity part 2: Acting forces ratio and solidification parameters
M. H. Avnaim et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2018)
Numerical study of melt flow under the influence of heater-generating magnetic field during directional solidification of silicon ingots
Zaoyang Li et al.
JOURNAL OF CRYSTAL GROWTH (2018)
Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite
J. T. Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of permanent magnetic stirring on the solidification microstructure and ingot quality of Al-Cu alloys
Haigen Wei et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
High damage-tolerance bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure
Alateng Shaga et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35 Cu alloy induced by ultrasonic melt processing
Feng Wang et al.
ACTA MATERIALIA (2017)
Interfacial tuning for the nucleation of liquid AlCu alloy
Lu Wang et al.
ACTA MATERIALIA (2017)
Heterogeneous nucleation and grain growth of inoculated aluminium alloys: An integrated study by in-situ X-radiography and numerical modelling
Yijiang Xu et al.
ACTA MATERIALIA (2017)
Fragmentation-driven grain refinement in directional solidification of AlCu10wt-% alloy at low pulling speeds
G. Zimmermann et al.
ACTA MATERIALIA (2017)
Dendritic growth velocities in an undercooled melt of pure nickel under static magnetic fields: A test of theory with convection
Jianrong Gao et al.
ACTA MATERIALIA (2016)
Effect of nano TiN/Ti refiner addition content on the microstructure and properties of as-cast Al-Zn-Mg-Cu alloy
Xinwei Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Measurements and Modeling of Stress in Precipitation-Hardened Aluminum Alloy AA2618 during Gleeble Interrupted Quenching and Constrained Cooling
Nicolas Chobaut et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Understanding the relationship between microstructure and mechanical properties of Al-Cu-Si ultrafine eutectic composites
Jeong Tae Kim et al.
MATERIALS & DESIGN (2016)
An experimental study of the (Ti-6Al-4V) xH phase diagram using in situ synchrotron XRD and TGA/DSC techniques
Pei Sun et al.
ACTA MATERIALIA (2015)
Effect of nickel on the microstructure and mechanical property of die-cast Al-Mg-Si-Mn alloy
Hailin Yang et al.
JOURNAL OF MATERIALS SCIENCE (2014)
The Solidification Behavior of AA2618 Aluminum Alloy and the Influence of Cooling Rate
Yulin Liu et al.
MATERIALS (2014)
Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys
Z. Asghar et al.
ACTA MATERIALIA (2011)
Mechanical behaviour and in situ observation of shear bands in ultrafine grained Pd and Pd-Ag alloys
K. Yang et al.
ACTA MATERIALIA (2010)
Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al-Si piston alloys
Yunguo Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Solute-vacancy binding in aluminum
C. Wolverton
ACTA MATERIALIA (2007)
Microscopic deformation mechanism of a Ti66.1Nb13.9Ni4.8Cu8Sn7.2 nanostructure-dendrite composite
K. B. Kim et al.
ACTA MATERIALIA (2006)
Microstructural control of sintered mechanically alloyed Al-1%Ni material
J Cintas et al.
SCRIPTA MATERIALIA (2005)
Comparative numerical study of the effects of rotating and travelling magnetic fields on the interface shape and thermal stress in the VGF growth of InP crystals
P Schwesig et al.
JOURNAL OF CRYSTAL GROWTH (2004)
Superplasticity and grain boundary sliding in rolled AZ91 magnesium alloy at high strain rates
YH Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
分享论文
