☆ 4.7 Article

Atomistic understanding of incipient plasticity in BCC refractory high entropy alloys

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

On calculations of basic structural parameters in multi-principal element small atomistic models

Shuozhi Xu et al.

Summary: Multi-principal element alloys (MPEAs) are alloys consisting of three or more principal elements forming solid solution phases. The numerical study of their mechanical properties relies on calculating basic structural parameters like lattice parameter and elastic constants. Direct calculations can be costly, leading to some studies using only one atomic configuration or indirect methods for estimation. Results show that the coefficient of variation using the first approach is positively correlated with lattice distortion in MPEAs.

COMPUTATIONAL MATERIALS SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Effects of Fe, Cr and Mn on inter-diffusion in CoNi-containing multiple principal alloys

Xin Li et al.

Summary: The study found that the FeCrMnCoNi HEA does not exhibit sluggish diffusion in both the absolute temperature scale and the homologous temperature scale. The effects of specific elements like Mn, Cr, and Fe on inter-diffusion were analyzed, showing different trends in different temperature scales. The relationship between the pre-exponential factor and homologous activation energy suggests that the atomic diffusion process may not qualitatively change from binary to multiple principal alloys.

INTERMETALLICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Atomistic simulations of the local slip resistances in four refractory multi-principal element alloys

Rebecca A. Romero et al.

Summary: This article investigates the slip resistances of dislocations in multi-principal element alloys (MPEAs) and the role of lattice distortion. It is found that MPEAs containing Cr exhibit higher slip resistances and lower anisotropy compared to pure metals.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of C x Hf 0.25 NbTaW 0.5 refractory high-entropy alloys at room and high temperatures

Shiyu Wu et al.

Summary: The microstructure and mechanical properties of refractory high-entropy alloys (RHEAs) were studied, showing excellent performance at high temperatures with yield strength surpassing currently known alloys. These RHEAs exhibited high-temperature performance stability and excellent plasticity.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Screw-controlled strength of BCC non-dilute and high-entropy alloys

Alireza Ghafarollahi et al.

Summary: This study investigates the mechanism of kink migration in single phase BCC High Entropy Alloys (HEAs) and proposes a new theory with a derived analytical model. The quantitative accuracy of the new theory is confirmed through comparison with experimental evidence.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Chemical short-range order strengthening mechanism in CoCrNi medium-entropy alloy under nanoindentation

Xiaofeng Yang et al.

Summary: In this study, the enhancing effect of chemical short-range order (SRO) structure on CoCrNi medium-entropy alloy (MEA) was investigated using molecular dynamics simulations of nanoindentation. Results showed a quantitative correlation between SRO parameters and mechanical properties, with strength and hardness of the alloy increasing with higher SRO parameters until reaching a stable value. Additionally, an increase in average hardness and dislocation nucleation force were observed in models with intermediate and stable SRO structures compared to a random solid solution (RSS) state model.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Remarkably high fracture toughness of HfNbTaTiZr refractory high-entropy alloy

X. J. Fan et al.

Summary: The BCC HfNbTaTiZr refractory HEA exhibits remarkable fracture toughness in addition to its high strength, good tensile ductility, and excellent high-temperature properties. This material shows promise for applications in high-temperature structural materials such as in the aerospace field.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced high-temperature strength of HfNbTaTiZrV refractory high-entropy alloy via Al 2 O 3 reinforcement

Bingjie Wang et al.

Summary: Novel composites of HfNbTaTiZrV refractory high-entropy alloy (RHEA) reinforced with 0-4 vol.% Al2O3 particles have been synthesized, and their microstructure evolution, compressive mechanical properties at room and elevated temperatures, as well as strengthening mechanisms have been analyzed. The addition of Al2O3 not only enhances the phase stability at elevated temperatures but also improves the compressive yield strength through multiple strengthening mechanisms.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Design and Characterization of Self-Lubricating Refractory High Entropy Alloy-Based Multilayered Films

Dawei Luo et al.

Summary: The study demonstrates that NbMoWTa/Ag self-lubricating multilayered films can significantly reduce friction while maintaining high hardness. The film properties are strongly dependent on the individual layer thickness, with the most promising properties obtained when the interface structure transforms into a coherent one. This work may open a new route for developing innovative self-lubricating RHEA films with excellent tribological properties.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Defect accumulation and evolution in refractory multi-principal element alloys

Shijun Zhao et al.

Summary: This study compares defect accumulation and evolution in two BCC refractory MPEAs through atomistic simulations, showing that the chemical complexity plays a critical role in defect evolution.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy

Rui Feng et al.

Summary: High-entropy alloys show promising applications at high temperatures and a single-phase alloy with high-temperature strength can be designed based on intrinsic material characteristics. The high-temperature strength retention is attributed to mechanisms such as large atomic-size and elastic-modulus mismatches, insensitive temperature dependence of elastic constants, and dominance of non-screw character dislocations caused by strong solute pinning.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Effects of local elemental ordering on defect-grain boundary interactions in high-entropy alloys

Shijun Zhao

Summary: This study investigates the interactions between defects and grain boundaries in a model high-entropy alloy through atomistic simulations. It reveals the significant influence of chemical disorder and local elemental segregation on defect-GB interactions, emphasizing the dominant roles of local ordering tendency and elemental segregation in high-entropy alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chemical-Affinity Disparity and Exclusivity Drive Atomic Segregation, Short-Range Ordering, and Cluster Formation in High-Entropy Alloys

Shuai Chen et al.

Summary: Experimental observations on two high-entropy alloys (HEAs) show that differences in chemical-affinity disparity and exclusivity among constituent elements lead to different clustering behaviors. Strong atomic segregation and short-range ordering in HEAs are influenced by large chemical-affinity disparities and high chemical-element exclusivity in clusters of different energy levels.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation behavior of a model high entropy alloy from atomistic simulations

Diana Farkas

Summary: Atomistic simulation studies on deformation behavior in a model quinary high entropy FCC alloy show that local composition fluctuations in random alloys make dislocation glide more difficult, resulting in higher strength and less plastic deformation compared to average atom materials.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Local chemical fluctuation mediated ductility in body-centered-cubic high-entropy alloys

Yeqiang Bu et al.

Summary: This study captured the dynamic interaction between LCFs and dislocations in ductile BCC HfNbTiZr HEAs, demonstrating how LCFs influence strength and ductility by promoting dislocation interaction. The observed double cross-slips caused by LCFs homogenously distribute dislocations onto various atomic planes, contributing to ductilization in HfNbTiZr. These findings offer insights into the deformation mechanisms of HEAs and suggest new strategies for designing ductile BCC HEAs.

MATERIALS TODAY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chemical short range order strengthening in BCC complex concentrated alloys

E. Antillon et al.

Summary: Atomistic methods were used to anneal two BCC chemically complex alloys to evaluate the effect of chemical short-range order on alloy strength. It was found that annealing led to a softening of the BCC quaternary alloy but had minimal effect on solid solution strengthening in the ternary alloy. Results were modeled using an extension of the Suzuki model of substitutional solid solution strengthening, with good agreement between the model results and direct atomistic simulation data.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Understanding imprint formation, plastic instabilities and hardness evolutions in FCC, BCC and HCP metal surfaces

Javier Varillas et al.

Summary: Nanoindentation experiments in various metals show the onset of plastic instabilities, formation of permanent nanoimprints and defect networks. Molecular dynamics simulations reveal the processes governing contact resistance, abrupt plastic instabilities, and the evolution towards a steady-state with plateauing hardness. The ratio of hardness to Young's modulus varies between different metals, with BCC Ta and Fe showing higher values. Factors such as stacking faults, nanotwin interlocking, and defect remobilization events contribute to the formation of permanent nanoimprints. Additionally, the correlation between nanoimprint formation and material response to indentation influences the hardness to yield strength ratio, exceeding the continuum plasticity bound.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cross-kinks control screw dislocation strength in equiatomic bcc refractory alloys

Xinran Zhou et al.

Summary: Research on refractory multi-element alloys with body-centered cubic structure has shown that chemical energy fluctuations play a significant role in their strength at high temperatures, which cannot be explained by standard models. The formation of cross kinks and self-pinning have been identified as key contributors to the alloy's strength.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of high entropy and twin boundary on the nanoindentation of CoCrNiFeMn high-entropy alloy: A molecular dynamics study

Siyao Shuang et al.

Summary: Molecular dynamics simulations were used to study the elastic-plastic behavior of high-entropy alloys, revealing that load-drop phenomenon during indentation in HEAs is less obvious compared to traditional metals, and a dense dislocation network forms underneath the indenter. Twin boundaries inhibit dislocation penetration and provide slipping paths for dislocations.

COMPUTATIONAL MATERIALS SCIENCE (2021)

添加到收藏夹

Article Engineering, Mechanical

Atomistic insights into the deformation mechanism of a CoCrNi medium entropy alloy under nanoindentation

Dongpeng Hua et al.

Summary: Understanding contact-induced behavior in metals is crucial for studying mechanical properties. Nanoindentation studies on CoCrNi MEA revealed unique dislocation nucleation at Cr-rich clusters, contrary to conventional homogeneous nucleation in pure metals. Compositional inhomogeneity and temperature were found to influence defect behavior, with nanotwin formation and phase-transformation promoted at low temperatures.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order

Sheng Yin et al.

Summary: The presence of short-range order influences the mobility of dislocations in high-entropy alloys, with edge dislocations being enhanced and double-kink nucleation in screw dislocations being reduced. A cross-slip locking mechanism is observed for the motion of screws, providing extra strengthening for refractory high-entropy alloy system.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K

Francesco Maresca et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Theory of screw dislocation strengthening in random BCC alloys from dilute to High-Entropy alloys

Francesco Maresca et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain boundary structure and mobility in high-entropy alloys: A comparative molecular dynamics study on a Σ11 symmetrical tilt grain boundary in face-centered cubic CuNiCoFe

Daniel Utt et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel atomic-scale mechanism of incipient plasticity in a chemically complex CrCoNi medium-entropy alloy associated with inhomogeneity in local chemical environment

Fu-Hua Cao et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Multidisciplinary Sciences

In-situ observation of the initiation of plasticity by nucleation of prismatic dislocation loops

Subin Lee et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Complex strengthening mechanisms in the NbMoTaW multi-principal element alloy

Xiang-Guo Li et al.

NPJ COMPUTATIONAL MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of solute-solute interactions on strengthening of random alloys from dilute to high entropy alloys

Shankha Nag et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dislocation structure and dynamics govern pop-in modes of nanoindentation on single-crystal metals

Nian Zhou et al.

PHILOSOPHICAL MAGAZINE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Unusual activated processes controlling dislocation motion in body-centered-cubic high-entropy alloys

Bing Chen et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Multiplicity of dislocation pathways in a refractory multiprincipal element alloy

Fulin Wang et al.

SCIENCE (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Nanoindentation/scratching at finite temperatures: Insights from atomistic-based modeling

Saeed Zare Chavoshi et al.

PROGRESS IN MATERIALS SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Solution hardening in body-centered cubic quaternary alloys interpreted using Suzuki's kink-solute interaction model

S. I. Rao et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of ultra-fine grained MoNbTaTiV refractory high-entropy alloy fabricated by spark plasma sintering

Qing Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Nanoindentation into a high-entropy alloy - An atomistic study

Iyad Alabd Alhafez et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transformation induced softening and plasticity in high entropy alloys

Jia Li et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys

M. Vaidya et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Development and exploration of refractory high entropy alloys-A review

Oleg N. Senkov et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lattice distortion in a strong and ductile refractory high-entropy alloy

Chanho Lee et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

High-Entropy Alloys: Potential Candidates for High-Temperature Applications - An Overview

Sathiyamoorthi Praveen et al.

ADVANCED ENGINEERING MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties of refractory high-entropy alloys: Experiments and modeling

H. W. Yao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Molecular dynamics simulation of BCC Ta with coherent twin boundaries under nanoindentation

Cheng Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Review Crystallography

Review of Nanoindentation Size Effect: Experiments and Atomistic Simulation

George Z. Voyiadjis et al.

CRYSTALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative simulation study of the structure of the plastic zone produced by nanoindentation

Yu Gao et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy

Yu Zou et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Atomistic simulation of tantalum nanoindentation: Effects of indenter diameter, penetration velocity, and interatomic potentials on defect mechanisms and evolution

C. J. Ruestes et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: Microstructure and phase analysis

O. N. Senkov et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys

K. -Y. Tsai et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2011)

添加到收藏夹

Article Chemistry, Physical

Refractory high-entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers

XW Zhou et al.

PHYSICAL REVIEW B (2004)

添加到收藏夹

Article Multidisciplinary Sciences

Sample dimensions influence strength and crystal plasticity

MD Uchic et al.

SCIENCE (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

Article Multidisciplinary Sciences

Atomistic mechanisms governing elastic limit and incipient plasticity in crystals

J Li et al.

NATURE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.