Anionic assisted incorporation of WO3 nanoparticles for enhanced electrochemical properties of AZ31 Mg alloy coated via plasma electrolytic oxidation

The present work examined the influence of anion type on incorporating WO3 into the MgO layer produced via plasma electrolytic oxidation of AZ31 Mg alloy. Here, three different anions, such as aluminate (AlO2-), silicate (SiO32-), and phosphate (PO43-) were added separately into an alkaline electrolyte containing WO3 nanoparticles. The microstructural observations revealed that the incorporation of the WO3 nanoparticles is affected by the diameter of discharge channels associated with the type of anion added into the electrolyte. The sample produced from phosphate electrolytes had higher thickness but was more porous than those obtained in aluminate or silicate electrolytes. Regardless of anion type, the amounts of WO3 nanoparticles incorporated into the inner layer of PEO coating were more significant than those incorporated into the outer layer, where a WO3-rich inner layer was obtained in the case sample coated in electrolyte with silicate anions. The electrochemical measurements in a 3.5 wt% NaCl solution indicated that the corrosion resistance of the sample coated in silicate electrolyte was superior to other samples in which the sample coated in phosphate electrolyte exhibited the lowest corrosion resistance. This behavior is explained by a mechanism in which every anion produces its microstructural defects under the influence of discharge types, such as type-A, B, C, D, and E, thus, affecting the physical incorporation of WO3 into the MgO layer under plasma conditions. (c) 2022 Elsevier B.V. All rights reserved.

Automated summary

The present work investigated the impact of different anions on the incorporation of WO3 nanoparticles into the MgO layer during the plasma electrolytic oxidation of AZ31 Mg alloy. The type of anion added into the electrolyte influenced the microstructural features, coating thickness, and corrosion resistance of the samples. The coating produced in the presence of silicate anions exhibited the best corrosion resistance.