☆ 4.6 Article

Effect of Boron Element Additions on Microstructure, Biocompatibility, and Thermodynamic Parameters of NiTi Shape Memory Alloy

JOM (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Microstructure Analysis and Thermal Characteristics of NiTiHf Shape Memory Alloy with Different Composition

S. Buytoz et al.

Summary: Improving the microstructural analysis of shape memory alloys, particularly NiTiHf alloys, is crucial for various applications. Adding more hafnium in NiTiHf alloys can increase phase transformation temperatures but decrease enthalpy change for endo/exothermic processes. Oxidation studies reveal different microstructures, such as needle-like shapes and plate-like Ti-rich microstructures, depending on the composition of Ni and Hf elements in the alloys.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Article Thermodynamics

The effects of substituting Sn for Ni on the thermal and some other characteristics of NiTiSn shape memory alloys

Ibrahim Nazem Qader et al.

Summary: This study found that increasing the Sn content in NiTiSn alloy leads to fragmentation, Vickers microhardness is influenced by grain size, and martensite and austenite peaks shift to lower temperatures with increasing cycling process and Sn element addition.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Theoretical Analysis of Hysteresis and Characteristic Transition Temperatures of Iron-Based Memory Metals

V. Sampath et al.

Summary: The correlation between the valence electrons per atom (e(v)/a) and the characteristic transition temperatures of quaternary and quinary Fe-based shape memory alloys has been investigated. Regression equations relating their transformation temperatures (M-s, A(s)) to composition and e(v)/a have been obtained. It was found that on adding alloying elements to the SMAs, their transformation temperatures get altered in three distinct trends related to their e(v)/a ratio. The correlation between the transformation hysteresis and the atom diameter of the alloying elements was also analyzed.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive Manufacturing of NiTi Shape Memory Alloy for Biomedical Applications: Review of the LPBF Process Ecosystem

Keyvan Safaei et al.

Summary: NiTi shape memory alloys are widely used in biomedical applications due to their unique properties, and when combined with additive manufacturing, they have the potential to revolutionize the biomedical industry. This article discusses the potential biomedical applications of NiTi fabricated using AM processes, focusing on LPBF technique. It reviews the manufacturability, quality, phases, microstructure, properties, challenges, and opportunities associated with NiTi alloys produced via AM processing.

JOM (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of Nickel Content in One-Way and Two-Way Shape Recovery in Binary Ti-Ni Alloys

Elena P. Ryklina et al.

Summary: This study investigated the shape recovery characteristics of titanium nickelide with nickel contents of 50.0% and 50.7%, and found that the nickel content strongly impacts the shape recovery characteristics and grain/subgrain size. The total recovery strain was found to reach a maximum of 13.5-15% in equiatomic alloy and 20% in Ni-rich alloy.

METALS (2021)

添加到收藏夹

Article Physics, Multidisciplinary

Effects of substituting Nb with V on thermal analysis and biocompatibility assessment of quaternary NiTiNbV SMA

Esra Balci et al.

Summary: The study aimed to investigate the thermal, microstructural, and corrosion behavior of NiTiNb SMA by alloying with different composition of vanadium. The alloy with 2 (at.%) of vanadium was found to be more stable, but showed lower biocompatibility compared to equiatomic NiTi SMAs.

EUROPEAN PHYSICAL JOURNAL PLUS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of annealing temperature on microstructure and shape memory effect in austenite-martensite duplex Ni47Ti44Nb9 rolled sheets

Mingyan Sun et al.

Summary: The evolution of phase composition and microstructure in austenite-martensite duplex Ni47Ti44Nb9 rolled sheets during annealing was studied. Different annealing temperatures led to variation in phase composition and microstructure, affecting grain size, dislocation, and crystallographic texture. Sheets annealed at 600 degrees C exhibited higher recoverability compared to those annealed at 950 degrees C due to the combined effect of grain size, dislocation, and crystallographic texture.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure, phase transformation behavior and tensile superelasticity of NiTi shape memory alloys fabricated by the wire-based vacuum additive manufacturing

Ze Pu et al.

Summary: In this study, NiTi shape memory alloys with tensile superelasticity were fabricated using wire-based vacuum additive manufacturing, showing microstructure, phase transformation behavior, and tensile superelasticity dependence on building height. After heat treatment, the transformation behavior and superelasticity on the building height can be adjusted to be uniform.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Deformation Behavior, Structure and Properties of an Equiatomic Ti-Ni Shape Memory Alloy Compressed in a Wide Temperature Range

Victor Komarov et al.

Summary: This study investigated the flow curves and properties of an equiatomic Ti-Ni shape memory alloy at temperatures ranging from 100 to 900 degrees C. It was found that the optimal deformation temperature range for achieving high strains and improved functional properties is between 300-500 degrees C. Additionally, post-deformation annealing at temperatures above the deformation temperature led to a decrease in lattice defectness and a significant increase in shape recovery characteristics.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021)

添加到收藏夹

Article Chemistry, Physical

In-Depth Comparative Assessment of Different Metallic Biomaterials in Simulated Body Fluid

Radu Mirea et al.

Summary: The in vitro experiments on metallic biomaterials used for orthopedic implants immersed in simulated body fluid showed surface corrosion degradation and protective layer generation. The dissociation of metallic ions into the fluid makes them suitable for implant use.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of NiTi-based shape memory microcomposites with enhanced elastocaloric performance by a fully thermomechanical coupled phase-field model

Cheikh Cisse et al.

Summary: By using a thermomechanical coupled phase-field model, this study designs microarchitectures in NiTi matrix with different types, shapes, and volume fractions of non-transforming intermetallics, showing the potential to increase the coefficient of performance (COP) of elastocaloric composites by controlling processing parameters. Different arrangements and compositions of intermetallics can lead to significant variations in COP values, indicating the importance of selecting intermetallics with specific properties for achieving high COP.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Thermodynamics

Effects of heat treatment temperatures on phase transformation, thermodynamical parameters, crystal microstructure, and electrical resistivity of NiTiV shape memory alloy

Mediha Kok et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of aging temperature and aging time on the mechanism of martensitic transformation in nickel-rich NiTi shape memory alloys

I Kaya et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of the Nb Content on the Microstructure and Phase Transformation Properties of NiTiNb Shape Memory Alloys

F. Dagdelen et al.

JOM (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review on Additive Manufacturing of Shape-Memory Materials for Biomedical Applications

Nasim Sabahi et al.

JOM (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural characterization and quantitative phase analysis of Ni-rich NiTi after stress assisted aging for long times using the Rietveld method

Hojjat Naji et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Hf solute addition on the phase transformation behavior and hardness of a Ni-rich NiTi alloy

Meenu Prasher et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Physics, Multidisciplinary

Investigation of thermodynamic and microstructural characteristics of NiTiCu shape memory alloys produced by arc-melting method

Cengiz Tatar et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Phase field simulation on the grain size dependent super-elasticity and shape memory effect of nanocrystalline NiTi shape memory alloys

Bo Xu et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Thermodynamics

Transformation behavior in NiTi-20Ta and NiTi-20Nb SMAs

Fethi Dagdelen et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing

Jun Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Review Chemistry, Physical

Corrosion of Metallic Biomaterials: A Review

Noam Eliaz

MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Ta Content on Thermodynamic Properties and Transformation Temperatures of Shape Memory NiTi Alloy

F. Dagdelen et al.

METALS AND MATERIALS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural effect on the thermomechanical behavior of aged Ni-rich NiTi SMA

Boutheina Ben Fraj et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Engineering, Biomedical

In vitro performance of a nanobiocomposite scaffold containing boron-modified bioactive glass nanoparticles for dentin regeneration

Reza Moonesi Rad et al.

JOURNAL OF BIOMATERIALS APPLICATIONS (2019)

添加到收藏夹

Article Chemistry, Physical

Correlating microstructure and superelasticity of directed energy deposition additive manufactured Ni-rich NiTi alloys

Reginald F. Hamilton et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of second phase precipitation on martensitic transformation and hardness in highly Ni-rich NiTi alloys

Qiuhui Qin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influences of transformation behavior and precipitates on the deformation behavior of Ni-rich NiTi alloys

Q. C. Fan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of the Dissolution-Reformation Cycle of the Passive Oxide Layer on NiTi Orthodontic Archwires

B. Uzer et al.

SHAPE MEMORY AND SUPERELASTICITY (2017)

添加到收藏夹

Article Chemistry, Physical

A systematic investigation on the role of microstructure on phase transformation behavior in Ni-Ti-Fe shape memory alloys

Ritwik Basu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Thermodynamics

The surface oxidation behavior of Ni-45.16%Ti shape memory alloys at different temperatures

Fethi Dagdelen et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of shape memory alloy research, applications and opportunities

Jaronie Mohd Jani et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and martensitic transformation and mechanical properties of cast Ni rich NiTiCo shape memory alloys

N. El-Bagoury

MATERIALS SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

60NiTi Alloy for Tribological and Biomedical Surface Engineering Applications

Sudeep Ingole

JOM (2013)

添加到收藏夹

Article Chemistry, Physical

Microstructure and transformation behaviour of Ni75-XTiXPd25 high temperature shape memory alloys

K. V. Ramaiah et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Chemistry, Physical

Effect of thermal and mechanical cycling on the elastic and dissipative energy in CuAl(11.5wt%)Ni(5.0wt%) shape memory alloy

T. Y. Elrasasi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Shape memory behavior of high strength Ni54Ti46 alloys

H. E. Karaca et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Review Engineering, Biomedical

A new look at biomedical Ti-based shape memory alloys

Arne Biesiekierski et al.

ACTA BIOMATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-Energy Synchrotron X-Ray Diffraction for In Situ Study of Phase Transformation in Shape-Memory Alloys

Y. D. Wang et al.

JOM (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Upper-Cycle Temperature on the Load-Biased, Strain-Temperature Response of NiTi

Santo Padula et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

添加到收藏夹

Article Engineering, Biomedical

Introduction of antibacterial function into biomedical TiNi shape memory alloy by the addition of element Ag

Y. F. Zheng et al.

ACTA BIOMATERIALIA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Assessment of Corrosion Resistance and Metal Ion Leaching of Nitinol Alloys

Waseem Haider et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of Ni on martensitic phase transformations in NiTi shape memory alloys

J. Frenzel et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dependence of Transformation Temperatures of NiTi-based Shape-Memory Alloys on the Number and Concentration of Valence Electrons

Mehrdad Zarinejad et al.

ADVANCED FUNCTIONAL MATERIALS (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of carbon on martensitic phase transformations in NiTi shape memory alloys

J. Frenzel et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of annealing and initial temperature on mechanical response of a Ni-Ti-Cr shape-memory alloy

Jeom Yong Choi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Spark plasma sintering of functionally graded material in the Ti-TiB2-B system

HB Feng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Materials Science, Ceramics

Sintering and mechanical properties of titanium diboride with aluminum nitride as a sintering aid

LH Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Martensitic transformation of quaternary Ti50.5-XNi49.5ZrX/2HfX/2 (X=020 at.%) shape memory alloys

SF Hsieh et al.

MATERIALS CHARACTERIZATION (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.