相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Dual-phase hetero-structured strategy to improve ductility of a low carbon martensitic steel
J. X. Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Direct Atomic-Scale Observation of Ultrasmall Ag Nanowires that Exhibit fcc, bcc, and hcp Structures under Bending
Shiduo Sun et al.
PHYSICAL REVIEW LETTERS (2022)
Tracking the sliding of grain boundaries at the atomic scale
Lihua Wang et al.
SCIENCE (2022)
Strengthening and ductilization of laminate dual-phase steels with high martensite content
Bo Gao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Heterostructured materials: superior properties from hetero-zone interaction
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2021)
Effect of stacking fault energy on deformation mechanisms in Cu and Cu-30% Zn alloy with gradient structure obtained by SMAT
Xiaomin Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Mesoscopic origin of damage nucleation in dual-phase steels
Ao Tang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Enhanced mechanical properties of dual phase steel via cross rolling and intercritical annealing
Maryam Soleimani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Micro-laminated and ultrafine-grained dual-phase steel plates generated via intercritical rolling followed by water quenching
X. J. Shen et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Ductile fracture of dual-phase steel sheets under bending
Yu Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
On the mechanical heterogeneity in dual phase steel grades: Activation of slip systems and deformation of martensite in DP800
Chunhua Tian et al.
ACTA MATERIALIA (2020)
Cryogenic Stress-Driven Grain Growth Observed via Microcompression with in situ Electron Backscatter Diffraction
D. Frazer et al.
JOM (2020)
Making ultrastrong steel tough by grain-boundary delamination
L. Liu et al.
SCIENCE (2020)
Extraordinary tensile properties of titanium alloy with heterogeneous phase-distribution based on hetero-deformation induced hardening
Yuankui Cao et al.
MATERIALS RESEARCH LETTERS (2020)
Hetero-deformation-induced stress in additively manufactured 316L stainless steel
Decheng Kong et al.
MATERIALS RESEARCH LETTERS (2020)
Aged metastable high-entropy alloys with heterogeneous lamella structure for superior strength-ductility synergy
Cheng Zhang et al.
ACTA MATERIALIA (2020)
Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling
Bo Gao et al.
SCIENCE ADVANCES (2020)
Engineering Heterogeneous Multiphase Microstructure by Austenite Reverted Transformation Coupled with Ferrite Transformation
L. Liu et al.
JOM (2019)
Synergistic effects of holding time at intercritical annealing temperature and initial microstructure on the mechanical properties of dual phase steel
Fatemeh Jamei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Manipulating the powder size to achieve enhanced strength and ductility in harmonic structured Al alloy
Ruixiao Zheng et al.
MATERIALS RESEARCH LETTERS (2019)
Evaluation of Mechanical Properties and Microstructures of Molybdenum and Niobium Microalloyed Thermomechanically Rolled High-Strength Press Hardening Steel
Jaakko Hannula et al.
JOM (2019)
In-situ observation of dislocation dynamics near heterostructured interfaces
Hao Zhou et al.
MATERIALS RESEARCH LETTERS (2019)
In situ EBSD investigation of deformation processes and strain partitioning in bi-modal Ti-6Al-4V using lattice rotations
S. Hemery et al.
ACTA MATERIALIA (2019)
A high-strength heterogeneous structural dual-phase steel
Bo Gao et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Strong and ductile reduced activation ferritic/martensitic steel additively manufactured by selective laser melting
M. G. Jiang et al.
MATERIALS RESEARCH LETTERS (2019)
Residual stress provides significant strengthening and ductility in gradient structured materials
Mu-Xin Yang et al.
MATERIALS RESEARCH LETTERS (2019)
Effect of Prior Austenite Grain Size on Hole Expansion Ratio of Quenching and Partitioning Processed Medium-Mn Steel
Ji Hoon Kim et al.
JOM (2019)
Back-stress-induced strengthening and strain hardening in dual-phase steel
X. L. Liu et al.
MATERIALIA (2019)
Improved back stress and synergetic strain hardening in coarse-grain/nanostructure laminates
Yanfei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength
Muxin Yang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)
Thermomechanical processing of advanced high strength steels
Jingwei Zhao et al.
PROGRESS IN MATERIALS SCIENCE (2018)
New insights into martensite strength and the damage behaviour of dual phase steels
C. P. Scott et al.
ACTA MATERIALIA (2018)
Effect of microstructural refinement and intercritical annealing time on mechanical properties of high-formability dual phase steel
Mahsa Nouroozi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Severe Plastic Deformation - A Review
R. N. Harsha et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Formation and growth of voids in dual-phase steel at microscale and nanoscale levels
Gregory Gerstein et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Heterogeneous materials: a new class of materials with unprecedented mechanical properties
Xiaolei Wu et al.
MATERIALS RESEARCH LETTERS (2017)
Influence of martensite volume fraction and hardness on the plastic behavior of dual-phase steels: Experiments and micromechanical modeling
Qingquan Lai et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later
Ruslan Z. Valiev et al.
JOM (2016)
On the yield point phenomenon in low-carbon steels with ferrite-cementite microstructure
M. S. Mohsenzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Block and sub-block boundary strengthening in lath martensite
C. Du et al.
SCRIPTA MATERIALIA (2016)
Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials
Sanjay Kumar Vajpai et al.
MATERIALS RESEARCH LETTERS (2016)
Microstructure refinement of dual-phase steels with 3.5 wt% Mn: Influence on plastic and fracture behavior
Q. Lai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Damage and fracture of dual-phase steels: Influence of martensite volume fraction
Q. Lai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of inter-critical temperatures on martensite morphology, volume fraction and mechanical properties of dual-phase steels obtained from direct and continuous annealing cycles
Ali Ghaheri et al.
MATERIALS & DESIGN (2014)
Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics
Zhe Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Development of a new ultrafine grained dual phase steel and examination of the effect of grain size on tensile deformation behavior
N. Saeidi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Growth of austenite from as-quenched martensite during intercritical annealing in an Fe-0.1C-3Mn-1.5Si alloy
R. Wei et al.
ACTA MATERIALIA (2013)
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Y. Estrin et al.
ACTA MATERIALIA (2013)
Microscopic Deformation in Individual Grains in an Advanced High-Strength Steel
Zhenzhen Yu et al.
JOM (2013)
Tensile Properties and Work Hardening Behavior of Laser-Welded Dual-Phase Steel Joints
N. Farabi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Strain hardening behavior of nanostructured dual-phase steel processed by severe plastic deformation
Young Gun Ko et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Relationship between local deformation behavior and crystallographic features of as-quenched lath martensite during uniaxial tensile deformation
M. Michiuchi et al.
ACTA MATERIALIA (2009)
Kinetics of austenite formation in dual phase steels
Mohsen Asadi Asadabad et al.
ISIJ INTERNATIONAL (2008)
The role of geometrically necessary dislocations in giving material strengthening
NA Fleck et al.
SCRIPTA MATERIALIA (2003)