☆ 4.5 Article

Poly(lactic acid)/vinyl acetate ethylene blends: effect of crosslinking on their rheological, mechanical and thermal stability behavior

IRANIAN POLYMER JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Toughening modification of poly(lactic acid) using modified natural rubber

Wasan Tessanan et al.

Summary: The toughening modification of PLA was successfully achieved by incorporating modified natural rubber (MNR), which significantly improved fracture resistance, stretchability, and transparency of PLA. The high toughening efficiency of MNR for PLA is attributed to their good compatibility of the two phases.

IRANIAN POLYMER JOURNAL (2022)

添加到收藏夹

Review Polymer Science

An outlook on recent progress in poly(lactic acid): polymerization, modeling, and optimization

Geetu P. Paul et al.

Summary: Poly(lactic acid) has emerged as a capable biodegradable polymer which can be a suitable alternative to polyolefin. The synthesis methods of polycondensation of lactic acid and ring-opening polymerization of lactide have been extensively discussed in this study. Mathematical modeling has been proven to be an uncomplicated and significant approach to simulate the kinetic model for polymerization.

IRANIAN POLYMER JOURNAL (2022)

添加到收藏夹

Article Polymer Science

A novel biodegradable poly(propylene carbonate) with enhanced thermal and mechanical properties by incorporating tannic acid

Jianing Yang et al.

Summary: In this work, a biodegradable poly(propylene carbonate) (PPC) with improved thermo-oxidative stability and biodegradability was successfully prepared by incorporating tannin acid. The composite exhibits improvements in Young's modulus and yield strength due to the plentiful hydrogen bond between PPC and tannic acid (TA). The improved properties are attributed to the abundant polyphenol hydroxyl in TA, which enhances the hydrophilia of PPC/TA composites and constructs plentiful hydrogen bonds with PPC.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

添加到收藏夹

Article Engineering, Environmental

Influence of Ozonized Soybean Oil as a Biobased Plasticizer on the Toughness of Polylactic Acid

Kantima Chaochanchaikul et al.

Summary: "The study investigated the mechanism of enhancing toughness in polylactic acid (PLA) using a biobased plasticizer, ozonized soybean oil (OSBO). The findings showed that the increase in OSBO content led to improved elongation at break and impact strength, but reduced tensile strength of PLA. Additionally, the presence of OSBO enhanced the crystallization of PLA as the glass transition, crystallization, and melting temperatures decreased with increasing OSBO content."

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2022)

添加到收藏夹

Article Thermodynamics

Thermal behavior of PLA plasticized by commercial and cardanol-derived plasticizers and the effect on the mechanical properties

Antonio Greco et al.

Summary: This study investigates the thermal properties of poly(lactic acid) with different plasticizers, revealing that PLA plasticized with cardanol derivatives shows higher enthalpy relaxation below T-g, while PLA plasticized with PEG exhibits higher mobility above T-g. In terms of mechanical properties, PLA plasticized with ECA has a lower modulus but forms thicker crystals during crystallization, leading to a more significant increase in modulus in semicrystalline samples.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Engineering, Environmental

Adsorbability of Modified PBS Nanofiber Membrane to Heavy Metal Ions and Dyes

Mao Fan et al.

Summary: The study investigated the adsorption capacity of rhodamine-loaded PBS electrostatic spinning film for heavy metal ions and dyes, showing promising adsorption performance. Dynamic adsorption tests showed fast adsorption rates for CR and CV, with adsorption capacities of 111.2 and 83.0 mg/g within 10 seconds, while adsorption kinetics and isotherm studies indicated a transition from physical adsorption to chemisorption in the adsorption process.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Polymer Science

Thermal behavior and shape memory properties of PCL blends film with PVC and PMMA polymers

Mustafa Ersin Pekdemir et al.

Summary: The shape memory behavior and characterizations of PCL blended with PVC and PMMA were studied in this research. It was found that blending PVC and PMMA with PCL affected the melting temperature and mass loss temperature of the blended polymers. Additionally, the lack of solubility between PCL and PMMA prevented shape recovery, while the PCL:PVC blend showed excellent strain recovery in the shape memory recovering test.

IRANIAN POLYMER JOURNAL (2021)

添加到收藏夹

Article Polymer Science

Poly(lactic acid)/natural rubber/kenaf biocomposites production using poly(methyl methacrylate) and epoxidized natural rubber as co-compatibilizers

Nur Fazreen Alias et al.

Summary: Biocomposites are environmentally friendly materials with less carbon footprint, but face complexity in compatibility issues. Addition of specific compatibilizers can improve mechanical properties and interfacial adhesion, leading to reduced water absorption.

IRANIAN POLYMER JOURNAL (2021)

添加到收藏夹

Article Polymer Science

Thermal, Rheological and Mechanical Properties of Biodegradable Poly(propylene carbonate)/Epoxidized Soybean Oil Blends

Ling Zhao et al.

Summary: Biodegradable PPC/ESO blends were prepared by melt blending to enhance the performance of PPC. The addition of ESO improved the thermal stability of PPC, while also increasing its strength and toughness, as well as enhancing the flow characteristics of PPC.

CHINESE JOURNAL OF POLYMER SCIENCE (2021)

添加到收藏夹

Article Materials Science, Composites

Effect of microcrystalline cellulose [MCC] fibres on the morphological and crystalline behaviour of high density polyethylene [HDPE]/polylactic acid [PLA] blends

Siddharth Mohan Bhasney et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Polymer Science

Isothermal cold crystallization kinetics and properties of thermoformed poly(lactic acid) composites: effects of talc, calcium carbonate, cassava starch and silane coupling agents

Chutimar Deetuam et al.

IRANIAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Polymer Science

Effects of gamma irradiation on properties of PLA/flax composites

Xuelian Xia et al.

IRANIAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Engineering, Environmental

Biodegradation of Polycaprolactone (PCL) with Different Molecular Weights byCandida antarctica Lipase

Qingfeng Ma et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

添加到收藏夹

Article Polymer Science

In situ functionalization of poly(butylene adipate-co-terephthalate) polyester with a multi-functional macromolecular additive

Denial Mahata et al.

IRANIAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Simultaneously enhancing the fire retardancy and crystallization rate of biodegradable polylactic acid with piperazine-1,4-diylbis (diphenylphosphine oxide)

Lubin Liu et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Polymer Science

The properties of chemical cross-linked poly(lactic acid) by bis(tert-butyl dioxy isopropyl) benzene

Xue Ai et al.

POLYMER BULLETIN (2019)

添加到收藏夹

Article Polymer Science

Rubber Toughening of Polylactic Acid (PLA) with Poly(butylene adipate-co-terephthalate) (PBAT): Mechanical Properties, Fracture Mechanics and Analysis of Ductile-to-Brittle Behavior while Varying Temperature and Test Speed

Vito Gigante et al.

EUROPEAN POLYMER JOURNAL (2019)

添加到收藏夹

Article Engineering, Chemical

The Mechanical, Thermal, Rheological and Morphological Properties of PLA/PBAT Blown Films by Using Bis(tert-butyl dioxy isopropyl) Benzene as Crosslinking Agent

Xue Ai et al.

POLYMER ENGINEERING AND SCIENCE (2019)

添加到收藏夹

Article Polymer Science

Preparation and characterization of poly(ethylene carbonate)/poly(lactic acid) blends

N. A. Ramlee et al.

JOURNAL OF POLYMER RESEARCH (2018)

添加到收藏夹

Article Polymer Science

Heat Resistant and Mechanical Properties of Biodegradable Poly(Lactic Acid)/Poly(Butylene Succinate) Blends Crosslinked by Polyaryl Polymethylene Isocyanate

Yanping Hao et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

The effect of MDI on the structure and mechanical properties of poly(lactic acid) and poly(butylene adipate-co-butylene terephthalate) blends

Hongwei Pan et al.

RSC ADVANCES (2018)

添加到收藏夹

Article Polymer Science

Morphology and property changes in PLA/PHBV blends as function of blend composition

Gurmeet S. Kanda et al.

JOURNAL OF POLYMER RESEARCH (2018)

添加到收藏夹

Article Polymer Science

Miscibility and toughness improvement of poly(lactic acid)/poly(3-Hydroxybutyrate) blends using a melt-induced degradation approach

Sun-Mou Lai et al.

JOURNAL OF POLYMER RESEARCH (2017)

添加到收藏夹

Article Polymer Science

Toughening biodegradable polylactide with nanopores

Ningxing Peng et al.

JOURNAL OF POLYMER RESEARCH (2016)

添加到收藏夹

Article Polymer Science

Super Toughened Poly(L-lactide)/Thermoplastic Polyurethane Blends Achieved by Adding Dicumyl Peroxide

Yun-Yun Shi et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Toughening mechanism behind intriguing stress-strain curves in tensile tests of highly enhanced compatibilization of biodegradable poly(lactic acid)/poly(3-hydroxybutyrate-co-4-hydroxybutyrate)blends

Yijie Bian et al.

RSC ADVANCES (2014)

添加到收藏夹

Article Polymer Science

Viscoelasticity and thermal stability of polylactide composites with various functionalized carbon nanotubes

Defeng Wu et al.

POLYMER DEGRADATION AND STABILITY (2008)

添加到收藏夹

Article Polymer Science

The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends

Takeshi Semba et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.