相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Environmental, technological and economical aspects of cryogenic assisted hard machining operation of inconel 718: A step towards green manufacturing
Mohd Danish et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Sustainable milling of Ti-6Al-4V: A trade-off between energy efficiency, carbon emissions and machining characteristics under MQL and cryogenic environment
Muhammad Jamil et al.
JOURNAL OF CLEANER PRODUCTION (2021)
A review on cryogenic treatment of tungsten carbide (WC-Co) tool material
M. Padmakumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2021)
Effects of deep cryogenic treatment for tungsten carbide-iron cemented carbide
Jeong-Han Lee et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)
Optimization of Cryogenic Process Parameters for the Minimization of Surface Residual Stress in Pure Iron Using Taguchi Design
Meng Zheng et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2021)
Effect of deep cryogenic treatment on surface chemistry and microstructure of selected high-speed steels
Patricia Jovicevic-Klug et al.
APPLIED SURFACE SCIENCE (2021)
Effect of Cryogenic Treatment on Internal Residual Stresses of Hydrogen-Resistant Steel
Fengxiang Shang et al.
MICROMACHINES (2021)
Performance Investigation of Cryo-treated End Mill on the Mechanical and in vitro behavior of Hybrid-lubri-coolant-milled Ti-6Al-4V alloy
Rahul Davis et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
In Situ X-Ray Diffraction Analysis of Microstructure Evolution during Deep Cryogenic Treatment and Tempering of Tool Steels
Chengsong Cui et al.
STEEL RESEARCH INTERNATIONAL (2021)
Effects of deep cryogenic treatment on the microstructure and mechanical properties of an ultrahigh-strength TRIP-aided bainitic steel
Tianyu Zhang et al.
MATERIALS CHARACTERIZATION (2021)
Analyzing the influence of a deep cryogenic treatment on the mechanical properties of blanking tools by using the short-time method PhyBaLCHT
B. Blinn et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Impact of steel type, composition and heat treatment parameters on effectiveness of deep cryogenic treatment
Patricia Jovicevic-Klug et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Achieving machining effectiveness for AISI 1015 structural steel through coated inserts and grey-fuzzy coupled Taguchi optimization approach
C. Moganapriya et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)
Improvement in performance of cryogenically treated tungsten carbide tools in face milling of Ti-6Al-4V alloy
Abhineet Saini et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
The effect of vibration and cutting zone temperature on surface roughness and tool wear in eco-friendly MQL turning of AISI D2
Onur Ozbek et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effect of machinability, microstructure and hardness of deep cryogenic treatment in hard turning of AISI D2 steel with ceramic cutting
Fuat Kara et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Studies on cryogenically treated WC-Co insert at different soaking conditions
K. Arunkarthikeyan et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Effects of cryogenic treatment types on the performance of coated tungsten tools in the turning of AISI H11 steel
Nursel Altan Ozbek
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effects of deep cryogenic treatment on microstructure, impact toughness and wear resistance of an AISI D6 tool steel
P. H. S. Cardoso et al.
WEAR (2020)
An insight into microstructure and machining performance of deep cryogenically treated cemented carbide inserts
B. N. Sahoo et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effectiveness of deep cryogenic treatment on carbide precipitation
Patricia Jovicevic-Klug et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Comparative study of conventional and deep cryogenic treatment of AISI M3:2 (EN 1.3395) high-speed steel
Patricia Jovicevic-Klug et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Studies on the effects of deep cryogenic treated WC-Co insert on turning of Al6063 using multi-objective optimization
K. Arunkarthikeyan et al.
SN APPLIED SCIENCES (2020)
Influence of cryogenic heat-treatment soaking period and temperature on performance of sintered carbide cutting tools in milling of Inconel 718
Bilal Kursuncu
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy
Chetan et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Characterization of the mechanism of cryogenic treatment on the microstructural changes in tungsten carbide cutting tools
Abdullah Sert et al.
MATERIALS CHARACTERIZATION (2019)
Experimental investigation of cryogenic end milling on maraging steel using cryogenically treated tungsten carbide-cobalt inserts
Vinay Varghese et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of cryo-processing on properties of tungsten carbide with low, medium and high cobalt content
M. Padmakumar et al.
MATERIALS RESEARCH EXPRESS (2019)
Performance of cryogenically treated WC drill using tool wear measurements on the cutting edge and hole surface topography when drilling CFRP
D. Samuel Raj et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Effect of deep cryogenic treatment on microstructure, mechanical properties and machining performances of coated carbide tool
Binxun Li et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Effect of deep cryogenic treatment on the fracture toughness and wear resistance of WC-Co cemented carbides
Zeju Weng et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Influence of deep cryogenic treatment on performance of cemented carbide (WC-Co) inserts during dry end milling of maraging steel
Vinay Varghese et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Improvement of tribological behavior of H-13 steel by optimizing the cryogenic-treatment process using evolutionary algorithms
Sanjeev Katoch et al.
TRIBOLOGY INTERNATIONAL (2019)
Investigation of phase structure of cobalt and its effect in WC-Co cemented carbides before and after deep cryogenic treatment
M. Padmakumar et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy
Vinothkumar Sivalingam et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Characterization of cryogenically treated cemented carbide
M. Padmakumar et al.
INTEGRATED FERROELECTRICS (2017)
Techno-economic analysis of blanking punch life improvement by environment friendly cryogenic treatment
Gurnam Singh et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Grinding-induced metallurgical alterations in the binder phase of WC-Co cemented carbides
J. Yang et al.
MATERIALS CHARACTERIZATION (2017)
Comparative study of some machinability aspects in turning of pure titanium with untreated and cryogenically treated carbide inserts
Akhtar Khan et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
First Principles Theory of the hcp-fcc Phase Transition in Cobalt
Raquel Lizarraga et al.
SCIENTIFIC REPORTS (2017)
Technical, Economic and Environmental Review of the Lubrication/Cooling Systems used in Machining Processes
E. Benedicto et al.
ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)
The effects of cryogenic-treated carbide tools on tool wear and surface roughness of turning of Hastelloy C22 based on Taguchi method
Sitki Akincioglu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Strain-induced phase transformation of a thin Co film on flexible substrates
V. M. Marx et al.
ACTA MATERIALIA (2016)
Effect of cutting conditions on wear performance of cryogenically treated tungsten carbide inserts in dry turning of stainless steel
Nursel Altan Ozbek et al.
TRIBOLOGY INTERNATIONAL (2016)
A review of cryogenic treatment on cutting tools
Sitki Akincioglu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
An investigation of cobalt phase structure in WC-Co cemented carbides before and after deep cryogenic treatment
Hejia Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Binder phase strengthening of WC-Co alloy through post-sintering treatment
Li Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Influence of different post treatments on microstructure and properties of WC-Co cemented carbides
Lining Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel
Adem Cicek et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Effects of deep cryogenic treatment on microstructure and properties of WC-11Co cemented carbides with various carbon contents
Chen-hui Xie et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Optimization of drilling parameters using Taguchi technique and response surface methodology (RSM) in drilling of AISI 304 steel with cryogenically treated HSS drills
Adem Cicek et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2015)
Investigation of the effects of cryogenic treatment applied at different holding times to cemented carbide inserts on tool wear
Nurse Altan Ozbek et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Effect of cryogenic treatment on wear resistance of Ti-6Al-4V alloy for biomedical applications
Kaixuan Gu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Investigating the effect of quench environment and deep cryogenic treatment on the wear behavior of AZ91
Kamran Amini et al.
MATERIALS & DESIGN (2014)
Effect of Cryogenic Processing on Surface Roughness of Age Hardenable AA6061 Alloy
C. L. Gogte et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Influence of Cryoprocessing on Mechanism of Carbide Development in Cobalt-Bearing High-Speed Steel (M35)
N. B. Dhokey et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Carbide Precipitation During Tempering of a Tool Steel Subjected to Deep Cryogenic Treatment
V. G. Gavriljuk et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Influence of Deep Cryogenic Treatment on Microstructures and Mechanical Properties of an Ultrafine-Grained WC-12Co Cemented Carbide
Hejia Zhang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2014)
Influence of the Cutting Edge Radius and the Cutting Edge Preparation on Tool Life and Cutting Forces at Inserts with Wiper Geometry
Jaroslava Fulemova et al.
24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013 (2014)
Effects of deep cryogenic treatment on the wear development of H13A tungsten carbide inserts when machining AISI 1045 steel
R. Thornton et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2014)
Effect of Deep Cryogenic Treatment on Machinability and Wear Mechanism of TiAlN Coated Tools during Dry Turning
Hui-Bo He et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)
Evaluation of machinability of hardened and cryo-treated AISI H13 hot work tool steel with ceramic inserts
Adem Cicek et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)
Effects of Deep Cryogenic Treatment on Wear Mechanisms and Microthermal Expansion for the Material of Drive Elements
Yuh-Ping Chang et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2013)
Effect of cryogenic and QPQ compound treatment on the microstructures and performance of high speed steel
Luo Defu et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2012)
Metallurgical and mechanical characteristics of cryogenically treated tungsten carbide (WC-Co)
Simranpreet Singh Gill et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Performance of cryogenically treated M35 HSS drills in drilling of austenitic stainless steels
Adem Cicek et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Machinability of AISI 316 Austenitic Stainless Steel With Cryogenically Treated M35 High-Speed Steel Twist Drills
Adem Cicek et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Effect of Cryogenic Treatment on AISI M2 High Speed Steel: Metallurgical and Mechanical Characterization
Simranpreet Singh Gill et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Investigating the effect of holding duration on the microstructure of 1.2080 tool steel during the deep cryogenic heat treatment
Kamran Amini et al.
VACUUM (2012)
Metallurgical principles of cryogenically treated tool steels-a review on the current state of science
Simranpreet Singh Gill et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Performance evaluation of CBN, coated carbide, cryogenically treated uncoated/coated carbide inserts in finish-turning of hardened steel
Manu Dogra et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Investigation on wear behaviour of cryogenically treated TiA1N coated tungsten carbide inserts in turning
Simranpreet Singh Gill et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Effects of LaB6 addition on the microstructure and mechanical properties of ultrafine grained WC-10Co alloys
T. T. Shen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Influence of Shallow and Deep Cryogenic Treatment on Tribological Behavior of En 19 Steel
D. Senthilkumar et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2011)
Influence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steel
D. Senthilkumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Flank Wear and Machining Performance of Cryogenically Treated Tungsten Carbide Inserts
Simranpreet Singh Gill et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
Effect of cryogenic treatment on WC-Co cemented carbides
Jiang Yong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Kinetics of the allotropic hcp-fcc phase transformation in cobalt
Rico Bauer et al.
PHILOSOPHICAL MAGAZINE (2011)
Wear mechanisms of cemented carbide tools in dry cutting of precipitation hardening semi-austenitic stainless steels
Deng Jianxin et al.
WEAR (2011)
Cryoprocessing of cutting tool materials-a review
Simranpreet Singh Gill et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Cryogenic Processing: A Study of Materials at Low Temperatures
Susheel Kalia
JOURNAL OF LOW TEMPERATURE PHYSICS (2010)
Deep cryogenic treatment of AISI 302 stainless steel: Part I - Hardness and tensile properties
Paolo Baldissera
MATERIALS & DESIGN (2010)
Cryogenic Treatment of Tool Materials: A Review
Nirmal S. Kalsi et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy
Yong Jiang et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Wear characteristics of titanium alloy Ti54 for cryogenic sliding applications
N. S. M. El-Tayeb et al.
TRIBOLOGY INTERNATIONAL (2010)
Machinability of C45 steel with deep cryogenic treated tungsten carbide cutting tool inserts
T. V. SreeramaReddy et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Dry sliding wear of cryotreated multiple tempered D-3 tool steel
N. B. Dhokey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Effects of cryogenic treatment on wear behavior of D6 tool steel
A. Akhbarizadeh et al.
MATERIALS & DESIGN (2009)
fcc-hcp phase transformation in Co nanoparticles induced by swift heavy-ion irradiation
D. J. Sprouster et al.
PHYSICAL REVIEW B (2009)
Influence of varied cryotreatment on the wear behavior of AISI D2 steel
D. Dasa et al.
WEAR (2009)
Investigation of tool wear and cutting force in cryogenic machining using design of experiments
K. V. B. S. Kalyan Kumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Influence of different post treatments on tungsten carbide-cobalt inserts
Dinesh Thakur et al.
MATERIALS LETTERS (2008)
Effect of cryogenic treatment on the mechanical properties of 4340 steel
S. Zhirafar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI-4037 steel under cryogenic condition
N. R. Dhar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Performance of cryogenically treated tungsten carbide tools in milling operations
A. Y. L. Yong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Effect of deep cryogenic treatment on the carbide precipitation and tribological behavior of D2 steel
D. Das et al.
MATERIALS AND MANUFACTURING PROCESSES (2007)
Performance evaluation of cryogenically treated tungsten carbide cutting tool inserts
KHW Seah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2003)
Micro structure-based simulation of thermomechanical behavior of composite materials by object-oriented finite element analysis
N Chawla et al.
MATERIALS CHARACTERIZATION (2002)
Cryogenic treatment to augment wear resistance of tool and die steels
DM Lal et al.
CRYOGENICS (2001)
分享论文
