相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。In situ transmission electron microscopy investigation of electroplasticity in single crystal nickel
Xiaoqing Li et al.
ACTA MATERIALIA (2022)
Analytic model of dislocation density evolution in fcc polycrystals accounting for dislocation generation, storage, and dynamic recovery mechanisms
Abigail Hunter et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
An energy based modeling for the acoustic softening effect on the Hall-Petch behavior of pure titanium in ultrasonic vibration assisted micro-tension
Xinwei Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Defect reconfiguration in a Ti-Al alloy via electroplasticity
Shiteng Zhao et al.
NATURE MATERIALS (2021)
A full-field crystal plasticity model including the effects of precipitates: Application to monotonic, load reversal, and low-cycle fatigue behavior of Inconel 718
Adnan Eghtesad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effects of electric current on the plastic deformation behavior of pure copper, iron, and titanium
C. Rudolf et al.
ACTA MATERIALIA (2021)
Cross-scale prediction from RVE to component
Xinxin Sun et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy
X. X. Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Electron force-induced dislocations annihilation and regeneration of a superalloy through electrical in-situ transmission electron microscopy observations
Xin Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Thermo-magneto-mechanical coupling dynamics of magnetic shape memory alloys
Xue Chen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Microstructure topology optimization by targeting prescribed nonlinear stress-strain relationships
Seongik Kim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Modeling of the thermo-mechanical response and texture evolution of WE43 Mg alloy in the dynamic recrystallization regime using a viscoplastic self-consistent formulation
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Electroplasticity effects in Haynes 230
Patrick S. McNeff et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
A multi-scale MCCPFEM framework: Modeling of thermal interface grooving and deformation anisotropy of titanium alloy with lamellar colony
Jian Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
An efficient and robust approach to determine material parameters of crystal plasticity constitutive laws from macro-scale stress-strain curves
K. Sedighiani et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Dislocation structure evolution under electroplastic effect
Siqi Xiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Understanding the mechanisms of electroplasticity from a crystal plasticity perspective
Arka Lahiri et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys
Tao Tang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Full-stage prediction of discontinuous dynamic recrystallization of a titanium alloy through a sub-mesh internal state variables method
Xinxin Sun et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels
A. Benaarbia et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Mechanism for the macro and micro behaviors of the Ni-based superalloy during electrically-assisted tension: Local Joule heating effect
Xin Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Investigation of Heterogeneous Joule Heating as the Explanation for the Transient Electroplastic Stress Drop in Pulsed Tension of 7075-T6 Aluminum
Brandt J. Ruszkiewicz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Improving mechanism of both strength and ductility of GH4169 alloy induced by electric-pulse treatment
Jinlan An et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Modified Johnson-Cook model incorporated with electroplasticity for uniaxial tension under a pulsed electric current
Moon-Jo Kim et al.
METALS AND MATERIALS INTERNATIONAL (2018)
Extraordinary effect of the δ phase on the electrically-assisted deformation responses of a Ni-based superalloy
Xin Zhang et al.
MATERIALS CHARACTERIZATION (2018)
Electro-thermo-mechanical contact model for bulk metal forming under application of electrical resistance heating
Michael Terhorst et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Investigation of Deformation Behavior of SS304 and Pure Copper Subjected to Electrically Assisted Forming Process
Tianhao Jiang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Electric current-assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension
Moon-Jo Kim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Electroplastic behaviour in an aluminium alloy and dislocation density based modelling
Krishnaswamy Hariharan et al.
MATERIALS & DESIGN (2017)
A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys
Hongwei Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Modeling of thermal and mechanical behavior of a magnesium alloy AZ31 during electrically-assisted micro-tension
Xinwei Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Studies of grain boundary regions in deformed polycrystalline aluminum using spherical nanoindentation
Shraddha J. Vachhani et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Stress relaxation ageing behaviour and constitutive modelling of a 2219 aluminium alloy under the effect of an electric pulse
Lihua Zhan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Multi-scale simulation of nanoindentation on cast Inconel 718 and NbC precipitate for mechanical properties prediction
Chenghui Ye et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Size effects on flow stress behavior during electrically-assisted micro-tension in a magnesium alloy AZ31
Xinwei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Flow behavior and plasticity of Ti-6Al-4V under different electrically assisted treatments
Tianhao Jiang et al.
MATERIALS RESEARCH EXPRESS (2016)
EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation
Y. C. Lin et al.
MATERIALS & DESIGN (2016)
Effects of high-density pulse current on mechanical properties and microstructure in a rolled Mg-9.3Li-1.79Al-1.61Zn alloy
Furong Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The mechanical behavior of 5052-H32 aluminum alloys under a pulsed electric current
Jae-Hun Roh et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Electric current-induced annealing during uniaxial tension of aluminum alloy
Moon-Jo Kim et al.
SCRIPTA MATERIALIA (2014)
Modeling of discontinuous dynamic recrystallization of a near-α titanium alloy IMI834 during isothermal hot compression by combining a cellular automaton model with a crystal plasticity finite element method
Chuan Wu et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing
Hongwei Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically Assisted Deformation
James Magargee et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2013)
Effect of electropulsing on dislocation mobility of titanium sheet
Song Hui et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Manufacturing aspects relating to the effects of direct current on the tensile properties of metals
Carl D. Ross et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2007)
Metallic forging using electrical flow as an alternative to warm/hot working
Timothy A. Perkins et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
The effect of texture on ridging of ferritic stainless steel
HJ Shin et al.
ACTA MATERIALIA (2003)
Thermally activated plastic flow of metals and ceramics with an electric field or current
H Conrad
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Theoretical basis for electro- and magnetoplasticity
MI Molotskii
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Electroplasticity in metals and ceramics
H Conrad
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
A correlation between tensile flow stress and Zener-Hollomon factor in TiAl alloys at high temperatures
Y Wang et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2000)
分享论文
