4.4 Article

Investigation of the Effect of La and Ti Addition to Mg-4Sn-2Al Alloy on Microstructure, Mechanical and Corrosion Properties

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Metallurgy & Metallurgical Engineering

Effect of La/Nd Ratio on the Microstructure and Corrosion Behaviors of Squeeze-Cast Mg-Al-Zn-La-Nd Alloys

Pengxing Cui et al.

Summary: The effect of adding La and Nd on the microstructural evolution and corrosion response of AZ91 magnesium alloy was investigated in this study. The results showed that the addition of La and Nd improved the corrosion resistance by refining the microstructure and forming protective oxide films. Furthermore, the acicular Al11RE3 phase was found to be more effective than the granular Al2RE phase in hindering corrosion.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Article Metallurgy & Metallurgical Engineering

Effect of Al Content on the Solidification Behaviors of Mg-Al Alloys

Yi Meng et al.

Summary: The force, displacement, and temperature variations during solidification and cooling processes of Mg-Al alloy were measured. The effect of Al content on solidification behavior, solidification shrinkage behavior, and hot cracking tendency was investigated.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Article Metallurgy & Metallurgical Engineering

Study on the Hot Tearing Susceptibility of Mg-4Zn-xSn-1Ca Alloys

Feng Leng et al.

Summary: The effect of Sn addition on the hot tearing susceptibility of Mg-4Zn-xSn-0.6Zr alloy was studied. It was found that appropriate Sn addition could reduce the hot tearing susceptibility, while excessive Sn content increased it.

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Article Materials Science, Multidisciplinary

Mechanical properties of Al-Mg/MWCNT nanocomposite powder produced under different parameters of ball milling process

Hossein Ahmadian et al.

Summary: This study investigates the effects of multi-wall carbon nanotubes (MWCNTs) and ball milling process parameters on the structure of Al-Mg alloy powders. The results show that increasing the time and speed of the ball milling process leads to the formation of finer particles, intensifying plastic deformation and reducing crystallite size by almost 83%. It is also found that increasing the milling rate and time improves the distribution of MWCNTs and promotes their diffusion into the Al-Mg matrix. Microstructural investigations confirm the formation of Al-Mg intermetallic phases during the ball milling process of the composite powders.

DIAMOND AND RELATED MATERIALS (2022)

Article Metallurgy & Metallurgical Engineering

Effect of the precipitation state on high temperature tensile and creep behaviors of Mg-15Gd alloy

Shuxia Ouyang et al.

Summary: This study investigates the effect of different heat treatments on the mechanical behaviors of Mg-Gd alloys at high temperatures. The results show that the T6 alloy exhibits the highest tensile properties from room temperature to 300 degrees C, while the T4 alloy possesses the best creep properties above 260 degrees C.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Article Metallurgy & Metallurgical Engineering

Influence of microstructural characteristics on corrosion behavior of Mg-5Sn-3In alloy in Hank's solution

Xue-jian Wang et al.

Summary: The study investigated the influence of microstructural characteristics on the corrosion behavior of Mg-5Sn-3In alloys in Hank's solution after extrusion, showing that the extruded alloy exhibited a more uniform corrosion morphology and reduced local corrosion susceptibility. Cytotoxicity tests indicated a low cytotoxicity level for the alloy in vitro assays.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Article Materials Science, Multidisciplinary

Effect of La/Nd ratio on microstructure and mechanical properties of as-cast AZ91-xLa/Nd alloy

Pengxing Cui et al.

MATERIALS RESEARCH EXPRESS (2020)

Article Metallurgy & Metallurgical Engineering

Effect of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3A1-(1,2,3)Sn alloys

Xiao-yang Chen et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

Article Materials Science, Multidisciplinary

Effect of Sn addition on the microstructure and mechanical properties of AZ31 alloys

Jiaxuan Ma et al.

MATERIALS RESEARCH EXPRESS (2020)

Article Materials Science, Multidisciplinary

Solid solution softening in dislocation-starved Mg-Al alloys

Mashroor S. Nitol et al.

MECHANICS OF MATERIALS (2020)

Article Materials Science, Composites

The effect of Ti on the microstructure and mechanical properties of (Ti + Mg3Sb2)/Mg composites

Bo Li et al.

ADVANCED COMPOSITES LETTERS (2020)

Article Nanoscience & Nanotechnology

Effects of Mn addition on the microstructures, mechanical properties and work-hardening of Mg-1Sn alloy

Hongxin Liao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Metallurgy & Metallurgical Engineering

Recent progress in Mg-Li matrix composites

Yue-hua Sun et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Article Metallurgy & Metallurgical Engineering

Influence of Sn addition on microstructure and corrosion resistance of AS21 magnesium alloy

Huseyin Zengin et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of as-cast and as-hot-rolled novel Mg-xSn-2.5Zn-2Al alloys (x=2, 4 wt%)

Zhang-Zhi Shi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Chemistry, Physical

T6 Treatment and Its Effects on Corrosion Properties of an Mg-4Sn-4Zn-2Al Alloy

Xuefei Huang et al.

MATERIALS (2018)

Article Nanoscience & Nanotechnology

Microstructural evolution and mechanical strengthening mechanism of Mg-3Sn-1Mn-1La alloy after heat treatments

Zhanyong Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Nanoscience & Nanotechnology

Effects of hot ring forging on microstructure, texture and mechanical properties of AZ31 magnesium alloy

Jing Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Review Materials Science, Multidisciplinary

Fundamentals and advances in magnesium alloy corrosion

M. Esmaily et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Article Materials Science, Multidisciplinary

Effects of Sn addition on microstructure and mechanical properties of Mg-Zn-Al alloys

Bo Wang et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)

Article Metallurgy & Metallurgical Engineering

Corrosion behavior and surface treatment of superlight Mg-Li alloys

Yue-hua Sun et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

Article Materials Science, Multidisciplinary

Effects of Sn addition on microstructure and mechanical properties of Mg-Zn-Al alloys

Bo Wang et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)

Article Nanoscience & Nanotechnology

The microstructure and impression creep behavior of cast Mg-4Sn-4Ca alloy

Hamid Khalilpour et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Metallurgy & Metallurgical Engineering

MICROSTRUCTURE AND CASTABILITY OF Mg-Al-La ALLOYS FOR HIGH CONDUCTIVITY APPLICATIONS

Jeong-Min Kim et al.

INTERNATIONAL JOURNAL OF METALCASTING (2015)

Review Materials Science, Multidisciplinary

Corrosion of magnesium alloys: the role of alloying

K. Gusieva et al.

INTERNATIONAL MATERIALS REVIEWS (2015)

Review Materials Science, Multidisciplinary

Mechanical Properties of Magnesium-Rare Earth Alloy Systems: A Review

Sravya Tekumalla et al.

METALS (2015)

Review Metallurgy & Metallurgical Engineering

Effects of Ti addition on the microstructure and mechanical properties of Mg-Zn-Zr-Ca alloys

Jingai Chen et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2015)

Article Materials Science, Multidisciplinary

In Vitro Study on Mg-Sn-Mn Alloy as Biodegradable Metals

Zhen Zhen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)

Article Metallurgy & Metallurgical Engineering

Role of multi-microalloying by rare earth elements in ductilization of magnesium alloys

Yuanding Huang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2014)

Article Materials Science, Multidisciplinary

Strong strain hardening ability in an as-cast Mg-3Sn-1Zn alloy

Dan Luo et al.

MATERIALS LETTERS (2013)

Article Materials Science, Multidisciplinary

Strong strain hardening ability in an as-cast Mg-3Al-3Sn alloy

Hui-Yuan Wang et al.

MATERIALS CHEMISTRY AND PHYSICS (2012)

Article Materials Science, Multidisciplinary

Tensile properties of hot rolled Mg-3Sn-1Ca alloy sheets at elevated temperatures

G. H. Hasani et al.

MATERIALS & DESIGN (2011)

Article Materials Science, Multidisciplinary

Microstructural stability and high-temperature mechanical properties of AZ91 and AZ91+2RE magnesium alloys

R. Mahmudi et al.

MATERIALS & DESIGN (2011)

Article Engineering, Biomedical

The history of biodegradable magnesium implants: A review

Frank Witte

ACTA BIOMATERIALIA (2010)

Article Chemistry, Applied

Study on microstructure and mechanical properties of as-cast Mg-Sn-Nd alloys

Wang Qing et al.

JOURNAL OF RARE EARTHS (2010)

Article Metallurgy & Metallurgical Engineering

Key R&D activities for development of new types of wrought magnesium alloys in China

Pan Fu-sheng et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)

Article Chemistry, Physical

Characterisation of precipitates in an aged Mg-Zn-Ti alloy

J. Buha

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Chemistry, Physical

Synthesis of HCP, FCC and BCC structure alloys in the Mg-Ti binary system by means of ball milling

Kohta Asano et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Chemistry, Physical

Solid solution strengthening behaviors in binary Mg-Y single phase alloys

L. Gao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Nanoscience & Nanotechnology

Compressive creep behavior of Mg-Sn-La alloys

Shanghai Wei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Article Materials Science, Multidisciplinary

Impression Creep Characteristics of a Cast Mg Alloy

B. Kondori et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)

Article Metallurgy & Metallurgical Engineering

Microstructure, tensile properties and compressive creep resistance of Mg-(5-8.5)%Sn-2%La alloys

Zhang Xiao-ping et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2008)

Article Metallurgy & Metallurgical Engineering

Influence of the Deformation Mechanism on the Anisotropy of the Mechanical Properties and Workability of Magnesium Alloys

S. Ya. Betsofen et al.

RUSSIAN METALLURGY (2008)

Article Materials Science, Multidisciplinary

Natural ageing in magnesium alloys and alloying with Ti

Joka Buha

JOURNAL OF MATERIALS SCIENCE (2008)

Article Chemistry, Physical

Experimental investigation and thermodynamic calculation of Mg-Al-Sn phase equilibria and solidification microstructures

E. Doernberg et al.

JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2007)

Article Chemistry, Physical

The microstructure, tensile properties, and creep behavior of as-cast Mg-(1-10)% Sn alloys

Hongmei Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2007)

Article Materials Science, Multidisciplinary

Grain refinement of AZ31 magnesium alloy by titanium and low-frequency electromagnetic casting

Yingxin Wang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)

Article Metallurgy & Metallurgical Engineering

Structure and properties of alloys of the Mg-REM system

L. L. Rokhlin

METAL SCIENCE AND HEAT TREATMENT (2006)

Article Nanoscience & Nanotechnology

Magnesium - Properties - applications - potential

BL Mordike et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)