☆ 4.7 Article

Design, mechanical properties and optimization of lattice structures with hollow prismatic struts

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Isotropic design and mechanical characterization of TPMS-based hollow cellular structures

Junjian Fu et al.

Summary: This paper presents an isotropic design method for TPMS-based cellular structures, which are optimized using Boolean operations and genetic algorithms to achieve isotropic hollow structures with superior mechanical properties. Compared to solid counterparts, the optimized isotropic hollow cellular structures exhibit higher Young's modulus, bulk modulus, as well as better load-bearing and energy absorption properties in static and dynamic compression scenarios.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Enhancement in the mechanical behaviour of a Schwarz Primitive periodic minimal surface lattice structure design

Xiao Guo et al.

Summary: In this study, an improved Schwarz primitive lattice structure was proposed by redefining the original opening diameter with a shape parameter. Experimental results showed that the modified P lattice structure with a small opening diameter had increased Young's modulus, compressive strength, and energy absorption compared to the original P lattice structure.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Shell offset enhances mechanical and energy absorption properties of SLM-made lattices with controllable separated voids

Fei Liu et al.

Summary: This article introduces a mechanical metamaterial based on surface-based sheet lattice, and proposes a design method of shell offset to enhance mechanical properties and domain controllability. The experimental results show that increasing the shell offset can effectively improve the mechanical properties and energy absorption of the sheet lattice, and a feasible adjustment region has been found to control the spatial volume fraction of the void phases for heat exchange regulation.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Mechanics

Design, mechanical properties, and optimization of BCC lattice structures with taper struts

Miao Zhao et al.

Summary: A novel parametric approach was proposed to improve the mechanical properties of lattice structures. The performance and deformation behavior of lattice structures with different taper struts were investigated through finite element analysis and experimental tests. The results show that tapered struts can reduce stress concentration and increase the elastic modulus of the structure.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Aerospace

Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components

Chuang Wang et al.

Summary: The new method combines topology optimization and lattice optimization to create solid-lattice hybrid structures, improving mechanical performance and reducing structural weight effectively.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Mechanical performance of additively manufactured uniform and graded porous structures based on topology-optimized unit cells

Mohsen Teimouri et al.

Summary: The research utilizes a topology optimization method to develop unit cells for additively manufactured porous lattice structures and evaluates their mechanical properties and energy absorption parameters through finite element simulations. The results show that shell-type structures can achieve superior mechanical properties even with a smaller proportion of material usage.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Engineering, Mechanical

Mechanical properties of a new type of plate-lattice structures

Yabo Liu

Summary: The study found that the Young's modulus of the plate-lattice structure was twice that of the lattice composed of trusses, and the stiffness of the plate-lattice structure was more likely to reach the Hashin-Shtrikman theoretical upper bounds. Compared to truss lattice structures, plate-lattice structures exhibited 2-3 times higher stiffness values.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Increased efficiency gyroid structures by tailored material distribution

David Downing et al.

Summary: The study found that under uniaxial loading, loads predominantly distribute within helical substructures of the solid-surface gyroid, and the mechanical response can be tuned by adjusting the thickness of the load-carrying helical regions. This novel discovery enables more efficient use of material distribution.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of self-supporting lattices for additive manufacturing

Hao Zhou et al.

Summary: This study proposes an innovative design strategy for self-supporting lattice units that considers the geometric constraints of additive manufacturing, deriving the elastic constitutive relation using the nodal displacement method. This design strategy has been employed in the design of novel ultra-light spacecraft structures.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)

添加到收藏夹

Article Engineering, Civil

Topology-optimized hybrid solid-lattice structures for efficient mechanical performance

Mohsen Teimouri et al.

Summary: In this study, new hybrid solid-lattice structures were developed by combining strut-based lattice wireframes with topology optimized solid structures. Mechanical performance analyses showed that the novel structures outperformed classic solid structures and lattice wireframes in terms of stiffness, buckling failure load, and energy absorption, while the effect of different unit cells was also examined. Additionally, despite a considerable increase in structural mass in the hybrid structures, the fundamental frequency was only slightly reduced in frequency analysis.

STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transition boundaries and stiffness optimal design for multi-TPMS lattices

Fangxi Ren et al.

Summary: By optimizing the design of multi-scale and multi-TPMS lattices, utilizing specific lattice units in different stress regions, the performance and functionality of the structure can be significantly improved.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts

Long Bai et al.

Summary: Curving lattice structures, with controllable mechanical properties, low weight, and high strength, offer a promising option for various industries. By introducing a curving lattice design strategy, stress concentration at nodes can be effectively relieved, leading to significant improvements in mechanical properties.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Mechanical

A topology strategy to reduce stress shielding of additively manufactured porous metallic biomaterials

Lei Zhang et al.

Summary: A topology strategy of designing double-cone struts was proposed to reduce stress shielding of diamond-like porous metallic biomaterials while maintaining unvaried porosity. Experimental results showed that the elastic modulus and yield strength of DCD structures were significantly lower than those of UD lattices, which could match the mechanical properties with the host bone and avoid stress shielding. The study demonstrated that the double-cone topology strategy has great potential in the field of orthopedic implants.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pragmatic generative optimization of novel structural lattice metamaterials with machine learning

Anthony P. Garland et al.

Summary: Metamaterials, also known as architected or programmable materials, allow designers to customize mesoscale topology and shape for unique material properties not found in nature. However, designing novel lattice metamaterials for complex multi-physics interactions remains challenging, primarily relying on human intuition or gradient optimization for simple problems.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Additively Manufactured Deformation-Recoverable and Broadband Sound-Absorbing Microlattice Inspired by the Concept of Traditional Perforated Panels

Xinwei Li et al.

Summary: This study develops a novel microlattice-based sound absorber by combining traditional concepts with additive manufacturing, which shows excellent absorption properties and impact resistance. The microlattice material has multiple absorption mechanisms, a broad frequency range, and high deformation recovery capability.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Mechanics

Two-scale concurrent topology optimization method of hierarchical structures with self-connected multiple lattice-material domains

Jingyu Hu et al.

Summary: This paper proposes a two-scale concurrent topology optimization method for structures composed of multiple lattice materials, optimizing the microstructures, topology, and material distribution concurrently while ensuring connections between different lattice materials. The method defines a multi-domain self-connected material interpolation model to describe macro-scale topology and interfaces between lattice materials accurately. By using the Solid Isotropic Material with Penalization interpolation and homogenization method, the proposed method effectively designs structures with superior mechanical properties.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Design, mechanical properties and energy absorption capability of graded-thickness triply periodic minimal surface structures fabricated by selective laser melting

Xiaojie Fan et al.

Summary: This study introduces a novel method for designing graded-thickness TPMS structures and summarizes and compares the manufacturability, mechanical properties, and energy absorption capacities of Ti6Al4V graded samples with different thicknesses and TPMS types. The results reveal that constant-thickness TPMS samples exhibit good stiffness, strength, and energy absorption capacities, while graded-thickness samples avoid large stress fluctuations and show higher elastic moduli and cumulative energy absorption values than constant-thickness samples. Additionally, the local curvature distribution predicts the deformation behavior of TPMS structures.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Biomedical

Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties

Oraib Al-Ketan et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Article Computer Science, Software Engineering

Anisotropic design and optimization of conformal gradient lattice structures

Dawei Li et al.

COMPUTER-AIDED DESIGN (2020)

添加到收藏夹

Article Engineering, Mechanical

Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces

Miao Zhao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Mechanical

An experimental and numerical investigation of compressive response of designed Schwarz Primitive triply periodic minimal surface with non-uniform shell thickness

Heran Jia et al.

EXTREME MECHANICS LETTERS (2020)

添加到收藏夹

Article Engineering, Mechanical

Sheet and network based functionally graded lattice structures manufactured by selective laser melting: Design, mechanical properties, and simulation

Hailun Zhou et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints

Lin Cheng et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-property cellular material design approach based on the mechanical behaviour analysis of the reinforced lattice structure

X. Ren et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-lattice inner structures for high-strength and light-weight in metal selective laser melting process

Dongseok Kang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: Simulations & experiments

Colin Bonatti et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

On hybrid cellular materials based on triply periodic minimal surfaces with extreme mechanical properties

Zeyao Chen et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures

Janos Plocher et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Engineering, Mechanical

Stiffness and specific energy absorption of additively-manufactured metallic BCC metamaterials composed of tapered beams

Thomas Tancogne-Dejean et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Mechanical

Design and strengthening mechanisms in hierarchical architected materials processed using additive manufacturing

Yin Sha et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Design, analysis and manufacturing of lattice structures: an overview

Mark Helou et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2018)

添加到收藏夹

Article Engineering, Mechanical

Elastically-isotropic elementary cubic lattices composed of tailored hollow beams

Thomas Tancogne-Dejean et al.

EXTREME MECHANICS LETTERS (2018)

添加到收藏夹

Article Engineering, Mechanical

Efficient design optimization of variable-density cellular structures for additive manufacturing: theory and experimental validation

Lin Cheng et al.

RAPID PROTOTYPING JOURNAL (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Minimum compliance topology optimization of shell-infill composites for additive manufacturing

Jun Wu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A review of analytical micromechanics models on composite elastoplastic behaviour

Yanchao Wang et al.

PLASTICITY AND IMPACT MECHANICS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiscale isogeometric topology optimization for lattice materials

Yingjun Wang et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

添加到收藏夹

Article Engineering, Mechanical

Compressive behaviour of stainless steel micro-lattice structures

R. Gumruk et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

添加到收藏夹

Article Mechanics

A unified periodical boundary conditions for representative volume elements of composites and applications

ZH Xia et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Foam topology bending versus stretching dominated architectures

VS Deshpande et al.

ACTA MATERIALIA (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.