☆ 4.7 Article

Effects of various types of nanomaterials on PCM melting process in a thermal energy storage system for solar cooling application using CFD and MCMC methods

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Large-scale fabrication of flexible EPDM/MXene/PW phase change composites with excellent light-to-thermal conversion efficiency via water-assisted melt blending

Hao Wu et al.

Summary: Thermal therapy based on phase change materials (PCMs) shows great promise in personal thermal care, with EMP based shape-stable phase change composites (SSPCCs) prepared via water-assisted melt blending showing improved light-to-thermal conversion efficiency. The EMP-0.8 SSPCCs exhibit high melting and freezing phase change enthalpies, with stable performance after multiple cycles, making them suitable for personal thermal therapy applications.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Metalloid-Cluster Ligands Enabling Stable and Active FeN4-Ten Motifs for the Oxygen Reduction Reaction

Bifa Ji et al.

Summary: This study demonstrates a design strategy to create a catalyst with excellent ORR activity and stability by incorporating Fe-N-4 motifs into carbon matrices and replacing the thiolate ligand with a stable tellurium cluster. The catalysts with FeN4-Te-n structure exhibit better activity and stability than commercial Pt/C catalyst.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Mathematics

Analytical Treatment of Unsteady Fluid Flow of Nonhomogeneous Nanofluids among Two Infinite Parallel Surfaces: Collocation Method-Based Study

Fengkai Gao et al.

Summary: Fluid flow and heat transfer of nanofluids have been widely studied due to their applications in industry. This paper presents an extension of a well-known method to investigate the accurate solutions to unsteady flow and heat transfer among two parallel plates. The mathematical model is converted into a non-dimensional form and a collocation method is successfully applied to obtain the solutions to the nonlinear ordinary differential equations. Various simulations are performed to analyze the behavior of velocity, temperature, and concentration, as well as other physical parameters. The proposed scheme is shown to be effective and reliable for studying such phenomena.

MATHEMATICS (2022)

添加到收藏夹

Article Thermodynamics

Numerical Study of the Transient Melting Of Nano-Enhanced Phase Change Material

Hamza Faraji et al.

Summary: This study conducted a parametric numerical analysis of heat transfer during the melting process within an enclosure filled with phase change material (PCM), focusing on the influence of dispersing copper nanoparticles on the thermal and hydrodynamic behavior of the optimized heat sink. Mathematical models and the finite volume method were employed to simulate and optimize the heat transfer process within the enclosure.

HEAT TRANSFER ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Nano-enhanced PCMs for low-temperature thermal energy storage systems and passive conditioning applications

Rajat Saxena et al.

Summary: This study focuses on enhancing the thermal properties of PCM-based TES systems by introducing TiO2 nanoparticles into the PCM matrix to form NEPCMs, resulting in an up to 37% increase in thermal conductivity. Beyond 2% concentration, partial settling of nanoparticles is observed over a 1-week duration.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2021)

添加到收藏夹

Article Thermodynamics

Investigation of melting of nanoparticle-enhanced phase change materials (NePCMs) in a shell-and-tube heat exchanger with longitudinal fins

Hamid Masoumi et al.

Summary: This study utilized dispersing nanoparticles in PCM and installing longitudinal fins on the inner tube to enhance the melting rate of PCM in a horizontal shell-and-tube heat exchanger. The addition of TiO2-NPs to PCM slightly improved its thermal conductivity but had a less than 4% impact on the melting rate due to the weakening of natural convection flows caused by increased viscosity.

HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Construction & Building Technology

Coupled EnergyPlus and CFD analysis of PCM for thermal management of buildings

Brijesh Pandey et al.

Summary: This study aims to develop a co-simulation framework between BES tool (EnergyPlus) and CFD tool (Ansys Fluent) to model the PCM integrated built environment and compare its prediction accuracy with the most popular BES tool, i.e., EnergyPlus, showing that the proposed co-simulation has better prediction accuracy in certain scenarios.

ENERGY AND BUILDINGS (2021)

添加到收藏夹

Article Thermodynamics

Experimental and numerical investigations on the effect of porosity and PPI gradients of metal foams on the thermal performance of a composite phase change material heat sink

Girish Kumar Marri et al.

Summary: This study investigates the thermal performance of a metal foam based composite phase change material heat sink through experiments and numerical simulations, showing that configurations with non-uniform porosity and PPI density gradients exhibit superior performance in the charging cycle.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Energy & Fuels

Effect of adding alumina nanoparticle in D-Mannitol for reversible solar thermoelectric power generation: An experimental study

Krishnadass Karthick et al.

Summary: Solar thermoelectric power generation using Alumina Nano-Enhanced Phase Change Material and storing rejected heat in D-Mannitol helps in achieving continuous power output. Experimental results suggest that a composition of 99% D-Mannitol + 1% Alumina nanoparticle is optimal for various heat inputs and cooling methods, resulting in significantly higher TEG electrical power outputs compared to natural cooling methods.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

添加到收藏夹

Article Thermodynamics

Numerical Survey on Performance of Hybrid NePCM for Cooling of Electronics: Effect of Heat Source Position and Heat Sink Inclination

Hamza Faraji et al.

Summary: This study focuses on numerical simulations of passive cooling of an electronic component using nano-enhanced phase change material. The results show that the position of the electronic component and the inclination of the heat sink significantly affect the cooling efficiency, with rectangular heat sinks being more effective than square ones for cooling electronic components.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2021)

添加到收藏夹

Article Energy & Fuels

Experimental analysis of small size solar dryer with phase change materials for food preservation

S. Rakshamuthu et al.

Summary: This study developed a small size greenhouse solar dryer equipped with phase change materials to improve the efficiency and quality of drying food products. The results showed that using phase change materials can significantly increase the drying rate and reduce the drying time.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Thermal performance enhancement of eutectic PCM laden with functionalised graphene nanoplatelets for an efficient solar absorption cooling storage system

Rupinder Pal Singh et al.

Summary: This study investigates the thermal enhancement of a binary eutectic phase change material (PCM) laden with COOH-functionalized Graphene nanoplatelets for a solar cooling thermal storage system. The results show that the nano-composite has improved thermal conductivity and specific heat properties. In a solar cooling system, the new nano-composite accelerates heat storage process and reduces total melt duration.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Parametric and sensitivity analysis of a PCM-integrated wall for optimal thermal load modulation in lightweight buildings

Ravi Anant Kishore et al.

Summary: The study conducts a parametric and sensitivity analysis on PCM-integrated lightweight building walls, examining the effects of various PCM parameters on thermal load modulation and wall-related heat gains. The optimized PCM proposed in the study can significantly reduce wall-related heat gain without compromising occupants' thermal comfort.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Silica fume/capric acid-stearic acid PCM included-cementitious composite for thermal controlling of buildings: Thermal energy storage and mechanical properties

Gokhan Hekimoglu et al.

Summary: In this study, a novel kind of cement mortar was produced with thermal energy storing/releasing properties by incorporating CA-SA eutectic PCM and SF to form FSC-PCM. The FSC-PCM showed great stability in terms of thermal properties, chemical structure, and cycling reliability. Replacement of OCM with FSC-PCM in different weight fractions resulted in improved thermoregulation performance in indoor environments, demonstrating potential for energy savings in buildings.

ENERGY (2021)

添加到收藏夹

Article Thermodynamics

A novel battery thermal management system using nano-enhanced phase change materials

Ravindra Jilte et al.

Summary: The study introduces a novel modified battery module configuration using two-layer nanoparticle enhanced phase change materials, which shows better cooling performance for Li-ion cells in electric vehicles. The arrangement of m x n x p maintains cell temperature below 46 degrees C even at a hot ambient temperature of 40 degrees C, indicating the potential of the proposed system for efficient battery thermal management.

ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Bayesian Method for Parameter Estimation in Transient Heat Transfer Problem

Aminul Islam Khan et al.

Summary: In this study, a Bayesian inference based inverse technique is used to find local heat transfer coefficient and local steam temperature at the inner surface of a steam header. The calculated outer surface temperatures agree well with experimental measurements in both heating and cooling processes, demonstrating the efficiency of the stochastic based Bayesian technique in estimating unknown boundary conditions at an inaccessible location.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement of nano-encapsulated phase change material (NEPCM) using metal foam for thermal energy storage

W. Q. Li et al.

Summary: The Foam/NEPCM composite material enhances thermal energy storage by combining the thermal enhancement of metal foam and latent heat absorption of NEPCM, resulting in lower wall temperature and more uniform internal temperature compared to pure NEPCM. The study also found that the lower porosity Foam/NEPCM composite has lower heated wall temperature and internal temperature near the heated wall due to its higher thermal conductivity and area/volume ratio.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Energy & Fuels

Effect of different building envelope materials on thermal comfort and air-conditioning energy savings: A case study in Basra city, Iraq

Raad Z. Homod et al.

Summary: The study suggests that the materials used in buildings are the most significant factor affecting the energy consumption of HVAC systems. A hybrid calculation model is employed to evaluate thermal comfort in buildings, reflecting their energy consumption. Simulation results of vernacular buildings and autoclaved aerated concrete buildings show that vernacular buildings have the highest energy saving potential throughout the day.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Two-phase frictional pressure drop with pure refrigerants in vertical mini/micro-channels

Muhammad Shujaat Ali et al.

Summary: This study investigated the frictional pressure drop during flow boiling of eco-friendly refrigerants, such as isobutane, HFC-152a, and HFO-1234yf, compared to HFC-134a. The study found that critical controlling parameters like heat flux, mass velocity, and exit vapor quality had a significant impact on pressure drop, with effects varying based on saturation temperature.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Using triply periodic minimal surfaces (TPMS)-based metal foams structures as skeleton for metal-foam-PCM composites for thermal energy storage and energy management applications

Zahid Ahmed Qureshi et al.

Summary: This study investigates the use of novel structures as skeletons for metal foam-PCM composites, comparing their thermal energy storage performance through transient numerical simulations and steady state simulations. The results demonstrate that the novel structures show superior performance in enhancing effective thermal conductivity.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Energy & Fuels

Pareto optimal design of a finned latent heat thermal energy storage unit using a novel hybrid technique

Hamid Maleki et al.

Summary: This study optimized a finned latent heat thermal energy storage (LHTES) unit using a hybrid procedure involving CFD, GMDH-type ANN, NSGA-II, and MCDM. The effects of design variables on objective functions were studied, and the impact of fin length, fin volume fraction, and number of fins on system efficiency was analyzed. The study aimed to minimize phase change time and maximize stored energy, proposing optimal design points based on the analysis.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Mathematics

Optimization of Nano-Additive Characteristics to Improve the Efficiency of a Shell and Tube Thermal Energy Storage System Using a Hybrid Procedure: DOE, ANN, MCDM, MOO, and CFD Modeling

Mohammed Algarni et al.

Summary: The use of nano-enhanced phase change material (NePCM) in latent heat thermal energy storage (LHTES) systems significantly impacts melting/solidification duration and stored energy. This study utilized a hybrid approach involving design of experiments (DOE), computational fluid dynamics (CFD), artificial neural networks (ANNs), multi-objective optimization (MOO), and multi-criteria decision making (MCDM) to optimize nano-additives properties in a shell and tube LHTES system containing paraffin wax as a phase change material (PCM). Multiple optimization variables related to nano-additive properties were considered, with the primary goal of reducing melting duration and increasing total stored energy.

MATHEMATICS (2021)

添加到收藏夹

Article Mathematics

Entropy Optimization of First-Grade Viscoelastic Nanofluid Flow over a Stretching Sheet by Using Classical Keller-Box Scheme

Mashhour A. Alazwari et al.

Summary: This study focuses on the flow characteristics and heat transfer models of nanofluids as heat transfer fluids under different conditions. Mathematical equations and graphs were used to analyze the factors influencing the distribution of temperature, speed, and entropy.

MATHEMATICS (2021)

添加到收藏夹

Article Mathematics

A Significant Solar Energy Note on Powell-Eyring Nanofluid with Thermal Jump Conditions: Implementing Cattaneo-Christov Heat Flux Model

Nidal H. Abu-Hamdeh et al.

Summary: PTSCs are commonly used in solar-thermal applications to achieve high temperatures. This study focused on determining the entropy generation when P-ENF flows across porous media on a horizontal plane under thermal jump circumstances. The research found that changing the permeability parameter affects the fluid properties, which in turn impacts thermal efficiency. Under certain conditions, there is a correlation between the increase in heat transport rate and the decrease in entropy production.

MATHEMATICS (2021)

添加到收藏夹

Article Thermodynamics

A detailed hydrothermal investigation of a helical micro double-tube heat exchanger for a wide range of helix pitch length

Nidal H. Abu-Hamdeh et al.

Summary: The study found that applying a helix angle in the helical micro double-tube heat exchanger can enhance heat transfer, with an optimal effect varying with Reynolds number. Increasing Reynolds number leads to higher overall heat transfer coefficient, pressure drop, and pumping power. Additionally, increasing pitch length decreases OHTC, pressure drop, and pumping power.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Review Energy & Fuels

A review on container geometry and orientations of phase change materials for solar thermal systems

Banumathi Munuswamy Swami Punniakodi et al.

Summary: PCM melting and solidification processes are influenced by container geometry and orientation, as well as by the addition of fins, nanoparticles, container geometry, and orientation. Operating parameters such as heat transfer fluid temperature, flow rate, and initial temperature of storage material play a dominant role in PCM melting.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Mathematics

Combination Effect of Baffle Arrangement and Hybrid Nanofluid on Thermal Performance of a Shell and Tube Heat Exchanger Using 3-D Homogeneous Mixture Model

Mashhour A. Alazwari et al.

Summary: The study found that adding nanoparticles to the distilled water or increasing the fluid's Reynolds number can improve the heat transfer performance in shell and tube heat exchangers, especially at a baffle angle of 135 degrees. Additionally, increasing the baffle angle resulted in more fluid blocking areas, leading to increased pressure drop and friction.

MATHEMATICS (2021)

添加到收藏夹

Article Thermodynamics

Melting process of the nano-enhanced phase change material (NePCM) in an optimized design of shell and tube thermal energy storage (TES): Taguchi optimization approach

Mohammad Ghalambaz et al.

Summary: The study modeled and analyzed the performance of petal-shaped pipes in a shell and tube TES unit, finding that copper nanoparticles outperformed graphene oxide nanoparticles. In the optimal design, the geometric shape of the petal pipe was identified as the most important parameter for maximizing energy storage power in the TES unit.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Environmental

Flame-retardant and form-stable phase change composites based on MXene with high thermostability and thermal conductivity for thermal energy storage

Yong Luo et al.

Summary: The study successfully designed and prepared flame-retardant phase change materials, utilizing MXene as a supporting skeleton to improve the thermal conductivity and flame retardancy of PCMs, providing a potential solution for safe and efficient solar energy storage applications.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Thermodynamics

Thermal management of a simulated battery with the compound use of phase change material and fins: Experimental and numerical investigations

Zhiqiang Sun et al.

Summary: A novel PCM-Fin thermal management system is proposed to significantly prolong the working time of batteries and enhance thermal performance. Experimental and numerical results demonstrate the importance of the proposed heat transfer enhancement structures in improving the thermal control performance of PCM systems.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Chemical

Free convection and second law scrutiny of NEPCM suspension inside a wavy-baffle-equipped cylinder under altered Fourier theory

M. K. Nayak et al.

Summary: This study simulated the free convection and entropy generation of nano-encapsulated phase change material (NEPCM) inside a circular cold cylinder using the finite element method, considering the effects of magnetic field and heat flux model. Changes in baffle amplitude and magnetic field strength affect the movement of NEPCMs and entropy generation, while an increase in baffle size alters the flow patterns and velocities.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Thermal performance of heat sink using nano-enhanced phase change material (NePCM) for cooling of electronic components

Anuj Kumar et al.

Summary: The present experimental study focuses on the thermal performance of nano-enhanced phase change material (NePCM) based thermal energy storage system for cooling electronic components. Different heat sink (HS) configurations were studied, with the HSSPF involving PCM/NePCM showing the best thermal performance. The addition of CuO nanoparticle beyond a certain concentration decreased the HS performance considerably.

MICROELECTRONICS RELIABILITY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Numerical study on the performance of shell-and-tube thermal energy storage using multiple PCMs and gradient copper foam

Liang Pu et al.

Summary: This study investigates the use of multiple phase change materials and gradient copper foam to accelerate the melting of phase change materials and improve heat transfer effectiveness. Results indicate that the utilization of single PCM shows better heat transfer effectiveness compared to radial multiple PCMs. Additionally, the negative gradient type of copper foam offers the best heat transfer effectiveness.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

A new approach for employing multiple PCMs in the passive thermal management of photovoltaic modules

Jasim M. Mahdi et al.

Summary: Utilizing multiple PCMs with different melting temperatures for thermal management of photovoltaic modules can significantly increase the thermal management duration and enhance power output. Based on the research findings, employing the arrangement of multiple PCMs can prolong PCM melting time and extend the thermal management time of photovoltaics.

SOLAR ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Numerical Simulation of the Impact of the Heat Source Position on Melting of a Nano-Enhanced Phase Change Material

Tarek Bouzennada et al.

Summary: A numerical study on a new design of Nano-Enhanced Phase change material (NEPCM)-filled enclosure was conducted in this paper. The results show that both heat transfer and melting rates are significantly improved when the inner tube is located at the bottom region of the enclosure and the concentration of nanoparticles in the PCM is increased.

NANOMATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Simplified mathematical model and experimental analysis of latent thermal energy storage for concentrated solar power plants

Tariq Mehmood et al.

Summary: Depletion of fossil reserves and environmental concerns have driven the development of renewable energy technologies, with concentrated solar power (CSP) emerging as a promising alternative. A simplified mathematical model of PCM-based TES was proposed and experimentally validated, showing high accuracy in predicting energy storage capacity. This model is suitable for quick decision-making and design estimates in large-scale applications of EPCM-TES systems or when a reduced-order model of an entire CSP plant is needed.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Improving the tubular solar still performance using square and circular hollow fins with phase change materials

Mohamed Abdelgaied et al.

Summary: By adding copper hollow fins and PCM reservoir to the tubular solar still, the production of distilled water can be increased. Experimental results demonstrate that utilizing different shapes of hollow fins and PCM can significantly enhance the performance of the tubular solar still.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Mathematics

Non-Isothermal Hydrodynamic Characteristics of a Nanofluid in a Fin-Attached Rotating Tube Bundle

Mashhour A. Alazwari et al.

Summary: This study simulated a novel configuration of a rotating tube bundle under non-isothermal hydrodynamic conditions using a mixture model. It was found that increasing the Reynolds number, nanofluid concentration, and rotation speed could enhance the heat transfer coefficient of the system. The presence of copper nanoparticles also positively impacted the heat transfer paradigm, with a maximum enhancement of 258% achieved by adding a 4% nanoparticle volume concentration to the base fluid.

MATHEMATICS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Transient numerical analysis on the melting characteristics of Paraffin and D-mannitol phase change materials for latent thermal energy storage

S. Karthikeyan et al.

Summary: Solar energy is a widely-used alternative energy source, but its effectiveness is hindered by the lack of proper energy storage systems. Recent research has focused on thermal energy storage systems using Phase Change Materials (PCMs), with studies verifying the efficiency of PCMs through simulation with computational fluid dynamics software.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Thermodynamics

Study of effect of Al and Cu microparticles dispersed in D-Mannitol PCM for effective solar thermal energy storage

M. Pramothraj et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

添加到收藏夹

Article Thermodynamics

Preparation and characteristics evaluation of mono and hybrid nano-enhanced phase change materials (NePCMs) for thermal management of microelectronics

Adeel Arshad et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Thermodynamics

Heat transfer evaluation of a micro heat exchanger cooling with spherical carbon-acetone nanofluid

Z. X. Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Experimental Investigation of Heat Storage and Heat Transfer Rates during Melting of Nano-Enhanced Phase Change Materials (NePCM) in a Differentially-Heated Rectangular Cavity

Zirui Li et al.

JOURNAL OF THERMAL SCIENCE (2020)

添加到收藏夹

Article Energy & Fuels

A numerical study on the combined effect of dispersed nanoparticles and embedded heat pipes on melting and solidification of a shell and tube latent heat thermal energy storage system

Mahboobe Mahdavi et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the effect of perforated fins on thermal performance enhancement of vertical shell and tube latent heat energy storage systems

Ramin Karami et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Thermodynamics

Accurate Thermal Diffusivity Measurements Using a Modified Ångstrom's Method With Bayesian Statistics

Yuan Hu et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Article Energy & Fuels

A novel volumetric absorber integrated with low-cost D-Mannitol and acetylene-black nanoparticles for solar-thermal-electricity generation

Xusheng Zhang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Configuration and Optimization of a Minichannel Using Water-Alumina Nanofluid by Non-Dominated Sorting Genetic Algorithm and Response Surface Method

Ali Akbar Ahmadi et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Thermodynamics

Forced convection heat transfer of Nano-Encapsulated Phase Change Material (NEPCM) suspension in a mini-channel heatsink

C. J. Ho et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Transient pool boiling and particulate deposition of copper oxide nano-suspensions

Zhixiong Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Comparative study of the performance of air and geothermal sources of heat pumps cycle operating with various refrigerants and vapor injection

Saeed Maddah et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Energy & Fuels

Numerical investigation on the effect of fin design on the melting of phase change material in a horizontal shell and tube thermal energy storage

Hameed B. Mahood et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Energy efficiency optimization of the waste heat recovery system with embedded phase change materials in greenhouses: A thermo-economic-environmental study

Shu-Rong Yan et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Numerical and experimental study of heat transfer in a cubic cavity with a PCM in a vertical heated wall

S. Moreno et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Enhancement of the performance of a NEPCM filled shell-and-multi tube thermal energy storage system using magnetic field: A numerical study

Er Shi et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Performance improvement in concentrated photovoltaics using nano-enhanced phase change material with graphene nanoplatelets

M. Sivashankar et al.

ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Operation analysis, response and performance evaluation of a pulsating heat pipe for low temperature heat recovery

Zhixiong Li et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

A comparison between passive and active PCM systems applied to buildings

Gohar Gholamibozanjani et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Review Energy & Fuels

Performance improvement of solar thermal systems integrated with phase change materials (PCM), a review

F. S. Javadi et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Revisiting melting heat transfer of nano-enhanced phase change materials (NePCM) in differentially-heated rectangular cavities using thermochromic liquid crystal (TLC) thermography

Zi-Rui Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Experimental investigation on thermal behavior of graphene dispersed erythritol PCM in a shell and helical tube latent energy storage system

V Mayilvelnathan et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Boiling heat transfer characteristics of graphene oxide nanoplatelets nano-suspensions of water-perfluorohexane (C6F14) and water-n-pentane

Marjan Goodarzi et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Energy & Fuels

Heat transfer enhancement and melting behavior of phase change material in a direct-contact thermal energy storage container

Shiquan He et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Numerical study of dynamic melting enhancement in a latent heat thermal energy storage system

Jaume Gasia et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Mathematics, Applied

Natural convection heat transfer of water/Ag nanofluid inside an elliptical enclosure with different attack angles

Seyed Alireza Rozati et al.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

A comprehensive study on thermal storage characteristics of nano-CeO2 embedded phase change material and its influence on the performance of evacuated tube solar water heater

P. Manoj Kumar et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Environmental Sciences

Multi-fidelity approach to Bayesian parameter estimation in subsurface heat and fluid transport models

Kathrin Menberg et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Waste heat recovery from exhaust gas of an engine by using a phase change material

Ganesh S. Wahile et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Engineering, Geological

Slope Stability Analysis Using Bayesian Markov Chain Monte Carlo Method

Hadi Fattahi et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Flow and heat transfer in non-Newtonian nanofluids over porous surfaces

Hamid Maleki et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

Heat transfer and fluid flow of pseudo-plastic nanofluid over a moving permeable plate with viscous dissipation and heat absorption/generation

Hamid Maleki et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Business

Postauditing and Cost Estimation Applications: An Illustration of MCMC Simulation for Bayesian Regression Analysis

Hemantha S. B. Herath

ENGINEERING ECONOMIST (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Heat transfer and nanofluid flow over a porous plate with radiation and slip boundary conditions

Hamid Maleki et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2019)

添加到收藏夹

Article Engineering, Geological

Applying Bayesian Models to Forecast Rock Mass Modulus

Hadi Fattahi et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

Numerical study on the effects of fins and nanoparticles in a shell and tube phase change thermal energy storage unit

Mohammad Parsazadeh et al.

APPLIED ENERGY (2018)

添加到收藏夹

Article Engineering, Geological

Bayesian prediction of TBM penetration rate in rock mass

Amoussou Coffi Adoko et al.

ENGINEERING GEOLOGY (2017)

添加到收藏夹

Article Thermodynamics

Experimental and numerical study on heat transfer enhancement of flat tube radiator using Al2O3 and CuO nanofluids

Sobin Alosious et al.

HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Energy & Fuels

Heat transfer study of phase change materials with graphene nano particle for thermal energy storage

Karunesh Kant et al.

SOLAR ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Characterization of different sugar alcohols as phase thermal energy storage applications

E. Palomo del Barrio et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

添加到收藏夹

Article Construction & Building Technology

Experimental and numerical characterization of natural convection in a vertical shell-and-tube latent thermal energy storage system

Saeid Seddegh et al.

SUSTAINABLE CITIES AND SOCIETY (2017)

添加到收藏夹

Article Energy & Fuels

Thermal performance of a shell-and-tube latent heat thermal energy storage unit: Role of annular fins

Xiaohu Yang et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Numerical and statistical study on melting of nanoparticle enhanced phase change material in a shell-and-tube thermal energy storage system

Mohammad Parsazadeh et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Unconstrained melting heat transfer in a spherical container revisited in the presence of nano-enhanced phase change materials (NePCM)

Li-Wu Fan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Transient natural convection heat transfer of liquid D-mannitol on a horizontal cylinder

Makoto Shibahara et al.

RENEWABLE ENERGY (2016)

添加到收藏夹

Article Energy & Fuels

Preparation and thermal energy storage properties of D-Mannitol/expanded graphite composite phase change material

Tao Xu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

添加到收藏夹

Article Engineering, Chemical

Effects of Cu and Ag nano-particles on flow and heat transfer from permeable surfaces

M. R. Hajmohammadi et al.

ADVANCED POWDER TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improvement in thermal endurance of D-mannitol as phase-change material by impregnation into nanosized pores

Akihito Sagara et al.

MATERIALS CHEMISTRY AND PHYSICS (2014)

添加到收藏夹

Review Green & Sustainable Science & Technology

Superior thermal features of carbon nanotubes-based nanofluids - A review

S. M. Sohel Murshed et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

添加到收藏夹

Article Thermodynamics

Enhance heat transfer for PCM melting in triplex tube with internal-external fins

Sohif Mat et al.

ENERGY CONVERSION AND MANAGEMENT (2013)

添加到收藏夹

Article Green & Sustainable Science & Technology

Material selection and testing for thermal energy storage in solar cooling

Antoni Gil et al.

RENEWABLE ENERGY (2013)

添加到收藏夹

Article Physics, Applied

Effective thermal conductivity of graphene-based composites

Ke Chu et al.

APPLIED PHYSICS LETTERS (2012)

添加到收藏夹

Article Construction & Building Technology

Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution

Tiago Silva et al.

ENERGY AND BUILDINGS (2012)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review of solar cooling methods and thermal storage options

L. A. Chidambaram et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)

添加到收藏夹

Article Thermodynamics

Numerical study of fluid dynamic and heat transfer performance of Al2O3 and CuO nanofluids in the flat tubes of a radiator

Ravikanth S. Vajjha et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2010)

添加到收藏夹

Article Chemistry, Physical

The rheology of concentrated suspensions of arbitrarily-shaped particles

I. Santamaria-Holek et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2010)

添加到收藏夹

Article Thermodynamics

Experimental study on melting/solidification characteristics of a paraffin as PCM

Mithat Akgun et al.

ENERGY CONVERSION AND MANAGEMENT (2007)

添加到收藏夹

Article Physics, Condensed Matter

Model for thermal conductivity of carbon nanotube-based composites

QZ Xue

PHYSICA B-CONDENSED MATTER (2005)

添加到收藏夹

Article Statistics & Probability

Bayesian measures of model complexity and fit

DJ Spiegelhalter et al.

JOURNAL OF THE ROYAL STATISTICAL SOCIETY SERIES B-STATISTICAL METHODOLOGY (2002)

添加到收藏夹

Article Computer Science, Theory & Methods

WinBUGS - A Bayesian modelling framework: Concepts, structure, and extensibility

DJ Lunn et al.

STATISTICS AND COMPUTING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.