相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy
Weijian Qian et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing
Changhao Pei et al.
ENGINEERING FRACTURE MECHANICS (2022)
Anisotropic cyclic plasticity modeling for additively manufactured nickel-based superalloys
Shengzhe Jin et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)
Microstructural characterization and fatigue performance of the recast material induced by laser manufacturing of a nickel-based superalloy
Tinglian Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
On the fatigue crack growth behaviour of selective laser melting fabricated Inconel 625: Effects of build orientation and stress ratio
Xiaoan Hu et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
Effects of build direction on tensile and fatigue performance of selective laser melting Ti6Al4V titanium alloy
Wenbo Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
A damage evolution model based on micro-structural characteristics for an additive manufactured superalloy under monotonic and cyclic loading conditions
Changhao Pei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
R. Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
In-situ investigation on fatigue behaviors of Ti-6Al-4V manufactured by selective laser melting
Guian Qian et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Thermal gradient mechanical fatigue assessment of a nickel-based superalloy
Jingyu Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
On the Microstructure of Laser Beam Powder Bed Fusion Alloy 718 and Its Influence on the Low Cycle Fatigue Behaviour
Arun Ramanathan Balachandramurthi et al.
MATERIALS (2020)
Cyclic plasticity modeling of nickel-based superalloy Inconel 718 under multi-axial thermo-mechanical fatigue loading conditions
Jingyu Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Characterization of SLM-fabricated Inconel 718 after solid solution and precipitation hardening heat treatments
Wakshum M. Tucho et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Life assessment of multiaxial thermomechanical fatigue of a nickel-based superalloy Inconel 718
Jingyu Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Investigation of the anisotropic cyclic damage behavior of selective laser melted AISI 316L stainless steel
Felix Stern et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Effects of heat treatment and build orientations on the fatigue life of selective laser melted 15-5 PH stainless steel
Sagar Sarkar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718
Changhao Pei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting
Dongyun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction
Claire Bruna-Rosso et al.
MATERIALS & DESIGN (2018)
Solution Treatment Study of Inconel 718 Produced by SLM Additive Technique in View of the Oxidation Resistance
Michele Calandri et al.
ADVANCED ENGINEERING MATERIALS (2018)
Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Multiaxial fatigue life assessment of sintered porous iron under proportional and non-proportional loadings
Songyun Ma et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy
H. Xiao et al.
MATERIALS LETTERS (2017)
Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
Mang Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
Wakshum M. Tucho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
Yen-Ling Kuo et al.
SCRIPTA MATERIALIA (2017)
Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments
Ahmad Mostafa et al.
METALS (2017)
Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Unexpected δ-Phase Formation in Additive-Manufactured Ni-Based Superalloy
Y. Idell et al.
JOM (2016)
Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650°C
G. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
Dongyun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
E. Chlebus et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Effect of hot corrosion on low cycle fatigue behavior of superalloy IN718
G. S. Mahobia et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Zemin Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Erhard Brandl et al.
MATERIALS & DESIGN (2012)
Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
G. P. Dinda et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
分享论文
