☆ 4.7 Article

Fabrication and finite element simulation of 3D printed poly L-lactic acid scaffolds coated with alginate/carbon nanotubes for bone

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Highly conductive, stretchable, durable, breathable electrodes based on electrospun polyurethane mats superficially decorated with carbon nanotubes for multifunctional wearable electronics

Guoxi Luo et al.

Summary: As the use of smart wearable electronics becomes more prevalent, there is a need for stretchable, durable, and breathable electrodes that can easily integrate with the electronics and provide comfort to users over extended periods. However, progress in developing a scalable fabrication process for such electrodes has been limited. In this study, a novel stretchable polymer-carbon nanotube composite electrode was developed using a fibrous polyurethane mat decorated with conductive carbon nanotubes. The fabricated electrodes exhibited superior stretchability, conductivity, stability, durability, and air permeability.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Chemistry, Physical

Piezo-phototronic effect promoted carrier separation in coaxial p-n junctions for self-powered photodetector

Xinxin Du et al.

Summary: This study demonstrates fiber-shaped photodetectors constructed by vertical organic-inorganic heterostructures, achieving self-powered behavior and promoted photoresponse through piezo-phototronic effect. By controlling bend-induced piezo-potentials, tunable photoresponse and ultrafast response and recovery were realized, enhancing light detection ability.

NANO ENERGY (2022)

添加到收藏夹

Article Materials Science, Ceramics

A porous calcium-zirconia scaffolds composed of magnetic nanoparticles for bone cancer treatment: Fabrication, characterization and FEM analysis

Amir Jasemi et al.

Summary: This study utilized a porous magnetic-zirconia calcium bio-nanocomposite scaffold for bone tissue applications, created using the space holder method and mechanical activation. Results showed that the addition of MNPs can alter the mechanical and biological properties of the scaffold, while also increasing porosity. Biocompatibility was confirmed through MTT testing.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of tragacanthin gum-carboxymethyl chitosan bio-nanocomposite wound dressing with silver-titanium nanoparticles using freeze-drying method

Huixing Liang et al.

Summary: Wound healing is a complex process that sometimes requires external stimuli. The use of biological agents in wound dressings can modify the healing process and promote better recovery. In this study, a bio-nanocomposite wound dressing containing different weight percentages of AgO-TiO2 nanoparticles was fabricated and characterized for its physical and chemical properties, as well as bioactivity and biodegradability.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Engineering, Chemical

Application of 3D Bioprinters for Dental Pulp Regeneration and Tissue Engineering (Porous architecture)

Pedram Iranmanesh et al.

Summary: 3D printing technique is well-known for producing porous scaffolds or special three-dimensional structures layer by layer. Integration of different technologies and materials can enhance the properties of 3D tissue engineering scaffolds. Various tissue engineering strategies include cell-based, factor-based, and scaffold-based approaches.

TRANSPORT IN POROUS MEDIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication and characterization of nanocrystalline hydroxyapatite reinforced with silica-magnetite nanoparticles with proper thermal conductivity

Mohamad Shahgholi et al.

Summary: This study aims to improve the mechanical and thermal properties of SiO2 dental composites by incorporating reinforced-hydroxyapatite nano-powder. The results demonstrate that the addition of hydroxyapatite significantly enhances the mechanical properties and thermal conductivity of the composites.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Engineering, Environmental

3D printed nanofiltration membrane technology for waste water distillation

Sadaf Bashir Khan et al.

Summary: Surface water is the main source of drinkable water globally, but it can be polluted by various sources. Producing high-quality drinking water with nanofiltration membranes is possible, but fouling remains a major challenge. Recent advancements in 3D printing technology have the potential to revolutionize membrane design and production, leading to more efficient membrane module components. Surface imprinting technologies may play a significant role in water purification methods in the future.

JOURNAL OF WATER PROCESS ENGINEERING (2022)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Diagnostic accuracy of periapical radiograph, cone beam computed tomography, and intrasurgical linear measurement techniques for assessing furcation defects: a longitudinal randomised controlled trial

Nurul Ain Mohamed Yusof et al.

Summary: This study demonstrated that CBCT provided better diagnostic, sensitivity, and quantitative information on molars with furcation defects compared to periapical radiograph.

CLINICAL ORAL INVESTIGATIONS (2021)

添加到收藏夹

Article Polymer Science

Incorporation of graphene oxide and calcium phosphate in the PCL/PHBV core-shell nanofibers as bone tissue scaffold

Vahid Kheiri Mollaqasem et al.

Summary: Core-shell nanofibers based on polycaprolactone and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with different concentrations of graphene oxide and calcium phosphate were prepared for bone scaffolds, exhibiting desired mechanical and bioactivity properties. The scaffolds showed good biocompatibility and promoted osteocyte differentiation and maturation within 21 days.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Improved surface properties in spray-coated PU/TiO2/graphene hybrid nanocomposites through nonsolvent-induced phase separation

Salman Mirzadeh et al.

Summary: Superhydrophobic and antibacterial polyurethane nanocomposite films loaded with TiO2 and graphene nanoparticles were fabricated via a spray coating technique. The combination of TiO2, graphene, and nonsolvent led to a hierarchical structure with high uniform surface roughness, resulting in superhydrophobic/roll-off behavior and increased antibacterial activity to around 99%. The presence of TiO2 and graphene nanoparticles in the nonsolvent-induced phase separation (NIPS) process played a significant role in promoting the surface properties of the films.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Improving the mechanical properties of strontium nitrate doped dicalcium phosphate cement nanoparticles for bone repair application

Rezvan Fada et al.

Summary: Advancements have been made in the field of bone materials and cements, with particular focus on the impact of strontium nitrate on dicalcium phosphate bone cements. Analytical techniques such as XRD and FESEM were used to examine the phase composition and microstructure of the samples. The results indicated improved mechanical and biological properties in certain compositions of the scaffolds, particularly with the addition of hydroxyapatite and brushite.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Self-healing polymers using electrosprayed microcapsules containing oil: Molecular dynamics simulation and experimental studies

Chuan Sun et al.

Summary: The study investigates microcapsule-based smart coatings to reduce corrosion rate in oil and gas transmission lines. It has been found that smaller microcapsules improve corrosion resistance and adhesion of the coating to the substrate. A sample with 40 wt% microcapsules shows the best corrosion resistance, but polymers increase the results of electrochemical and water absorption tests, while the formation of microcracks is a serious problem in polymer composites.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effect of hexagonal structure nanoparticles on the morphological performance of the ceramic scaffold using analytical oscillation response

Ashkan Farazin et al.

Summary: The study investigated the impact of TiO2 nanoparticles on the properties of PCL porous bone implants, revealing that the addition of TiO2 can alter the physical and mechanical characteristics of the scaffolds, as well as slow down the degradation rate. The fabricated bio-nanocomposite scaffolds demonstrated high total porosity and pore sizes suitable for bone cell growth, indicating potential for use as bone substitutes.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation the mechanical properties of a novel multicomponent scaffold coated with a new bio-nanocomposite for bone tissue engineering: Fabrication, simulation and characterization

Nazanin Baneshi et al.

Summary: This study developed a scaffold with ideal properties using freeze-drying technology to treat fractures and injuries, validated its bioactivity, and biocompatibility. Through bioactivity testing, cell behavioral, and antibacterial experiments, it was found that the titanium sample scaffold gradually degrades while supporting cell growth, preserving the mechanical properties of the implants.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Polymer Science

Tissue engineering needs new biomaterials: Poly(xylitol-dodecanedioic acid)-co-polylactic acid (PXDDA-co-PLA) and its nanocomposites

Amir Sotoudeh et al.

Summary: The research introduced new biopolymers through chemical reactions between Xylitol, Dodecanedioic acid (DDA) and Lactic acid (LA), and analyzed their properties using various techniques. The presence of LA was found to have significant effects on the morphology and hydrophilic properties of the polymeric samples. Additionally, the inclusion of LA monomers and bio glass nanoparticles influenced the viscoelastic properties and degradation rate of the nanocomposite samples.

EUROPEAN POLYMER JOURNAL (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Performance of functionalized magnetic nanocatalysts and feedstocks on biodiesel production: A review study

Sajad Tamjidi et al.

Summary: The challenge of replacing fossil fuels with new energy sources is being addressed by exploring biodiesel as an alternative, although its relatively high cost compared to conventional diesel remains an issue. The use of magnetic catalysts shows promise in reducing production costs and promoting the large-scale synthesis of biodiesel.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Radiology, Nuclear Medicine & Medical Imaging

Cortical Bone Mechanical Assessment via Free Water Relaxometry at 3 T

Mahsa Talebi et al.

Summary: The study aims to quantify cortical bone water content using MRI and explore its relationship with mechanical competence. Results show significant correlations between VFA method and bone toughness, ultimate stress, and yield stress, indicating its superiority for this quantification.

JOURNAL OF MAGNETIC RESONANCE IMAGING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of shapeless scaffolds reinforced with baghdadite-magnetite nanoparticles using a 3D printer and freeze-drying technique

Mehdi Karimi et al.

Summary: This study used 3D printing and freeze-drying techniques to manufacture porous scaffolds, and through the study of mechanical and biological properties, it was found that the sample with 20wt% porosity exhibited excellent strength and biocompatibility. The conclusion indicates that the produced bio-nanocomposite scaffolds have potential application in tissue engineering.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A multilayer biomimetic chitosan-gelatin-fluorohydroxyapatite cartilage scaffold using for regenerative medicine application

Yuan Cheng et al.

Summary: In this study, pure chitosan and gelatin solutions were blended with Fluorohydroxyapatite (FHA) at various ratios to produce porous scaffolds, which were analyzed using XRD and SEM. The specimen containing 70% chitosan and 30% gelatin showed the best morphological uniformity and in-vitro biocompatibility properties. Additionally, the mechanical properties were enhanced with the addition of 30 wt% FHA nanoparticles.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Optimization and fabrication of alginate scaffold for alveolar bone regeneration with sufficient drug release

Maryam Soleimani et al.

Summary: Bone tissues with porous structure and drug-delivering capabilities can serve as effective drug delivery systems throughout the body. This study focuses on designing osteoconductive scaffolds with drug delivery function, incorporating drugs and magnetite nanoparticles into calcium silicate ceramics (CSC) to enhance bone tissue regeneration. The incorporation of metal oxides and substitution of calcium ions in CSCs lead to improved compressive strength and drug release capabilities, making them promising materials for bone tissue applications.

INTERNATIONAL NANO LETTERS (2021)

添加到收藏夹

Article Engineering, Chemical

Effect of calcium silicate nanoparticle on surface feature of calcium phosphates hybrid bio-nanocomposite using for bone substitute application

Hossein Akbari Aghdam et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Idiopathic osteosclerosis mimicry of a tooth: case report

M. Y. P. M. Yusof et al.

AUSTRALIAN DENTAL JOURNAL (2020)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical investigation of impact resistance of aluminum-copper cladded sheets using an energy-based damage model

M. R. Saeedi et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Thermal Conductivity Enhancement via Synthesis Produces a New Hybrid Mixture Composed of Copper Oxide and Multi-walled Carbon Nanotube Dispersed in Water: Experimental Characterization and Artificial Neural Network Modeling

Aliakbar Karimipour et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Test Methods for Fibre/Matrix Adhesion in Cellulose Fibre-Reinforced Thermoplastic Composite Materials: A Critical Review

J. Muessig et al.

REVIEWS OF ADHESION AND ADHESIVES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiscale modeling of the elastic moduli of CNT-reinforced polymers and fitting of efficiency parameters for the use of the extended rule-of-mixtures

Enrique Garcia-Macias et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Ceramics

Preparation of novel porous calcium silicate scaffold loaded by celecoxib drug using freeze drying technique: Fabrication, characterization and simulation

Alireza Kordjamshidi et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Preparation and characterization of PLA/PCL/HA composite scaffolds using indirect 3D printing for bone tissue engineering

Shadi Hassanajili et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Materials Science, Ceramics

3D microstructure-based modelling of the deformation behaviour of ceramic matrix composites

Tomasz Trzepiecinski et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Engineering, Manufacturing

Theoretical and experimental investigation of deep drawing of tailor-welded IF steel blanks with non-uniform blank holder forces

Mohammad Hossein Asadian-Ardakani et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Repeat analysis of intraoral digital imaging performed by undergraduate students using a complementary metal oxide semiconductor sensor: An institutional case study

Mohd Yusmiaidil Putera Mohd Yusof et al.

IMAGING SCIENCE IN DENTISTRY (2017)

添加到收藏夹

Article Engineering, Biomedical

Magnesium oxide nanoparticle-loaded polycaprolactone composite electrospun fiber scaffolds for bone-soft tissue engineering applications: in-vitro and in-vivo evaluation

Ajay Suryavanshi et al.

BIOMEDICAL MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of carbon nanotube-activated carbon hybrid electrodes by electrophoretic deposition for supercapacitor applications

Mohammad Mahmudul Huq et al.

DIAMOND AND RELATED MATERIALS (2016)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical characterization of glass-ceramic scaffolds at multiple characteristic lengths through nanoindentation

Mohamad Shahgholi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

添加到收藏夹

Proceedings Paper Nanoscience & Nanotechnology

A Novel Nano-Fiber of Iranian Gum Tragacanth-Polyvinyl Alcohol/Nanoclay Composite for Wound Healing Applications

H. Amiri Heydary et al.

5TH INTERNATIONAL BIENNIAL CONFERENCE ON ULTRAFINE GRAINED AND NANOSTRUCTURED MATERIALS, UFGNSM15 (2015)

添加到收藏夹

Review Engineering, Multidisciplinary

Virtual testing of advanced composites, cellular materials and biomaterials: A review

M. I. Okereke et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Chemistry, Physical

Sonochemical processing and characterization of composite materials based on soy protein and alginate containing micron-sized bioactive glass particles

Raquel Silva et al.

JOURNAL OF MOLECULAR STRUCTURE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bone tissue engineering using 3D printing

Susmita Bose et al.

MATERIALS TODAY (2013)

添加到收藏夹

Review Polymer Science

Alginate: Properties and biomedical applications

Kuen Yong Lee et al.

PROGRESS IN POLYMER SCIENCE (2012)

添加到收藏夹

Article Pharmacology & Pharmacy

The effect of acetaminophen nanoparticles on liver toxicity in a rat model

Esmaeil Biazar

International Journal of Nanomedicine (2010)

添加到收藏夹

Article Materials Science, Composites

On the estimation of mechanical properties of single-walled carbon nanotubes by using a molecular-mechanics based FE approach

Marco Rossi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Manufacturing

Novel approach to initial blank design in deep drawing using artificial neural network

M. Haddadzadeh et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2009)

添加到收藏夹

Article Engineering, Multidisciplinary

Research directions in computational mechanics

JT Oden et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.