In situ compatibilization of poly(L-lactic acid)/epoxidized soybean oil bio-blends by reactive additives

Article Engineering, Environmental

Preparation of Poly(Butylene Succinate)/Soy Protein Isolate Bio-Composites by Reactive Compatibilization with Peroxide and Acrylate

Xiu-xian Zhou et al.

Summary: The addition of BPO and HDDA in PBS/SPI bio-composites resulted in the production of a branched graft copolymer, which improved the compatibility and properties of the composites.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2022)

添加到收藏夹

Article Energy & Fuels

Sugar beet pulp: Resurgence and trailblazing journey towards a circular bioeconomy

Ashvinder K. Rana et al.

Summary: With technological advancement, sugar beet pulps have been found to have many alternative uses, being able to create multifunctional materials and various beneficial products.

FUEL (2022)

添加到收藏夹

Article Environmental Sciences

Recent developments in microbial degradation of polypropylene: Integrated approaches towards a sustainable environment

Ashvinder Kumar Rana et al.

Summary: Fossil-fuel-based plastics have caused significant environmental issues, but some bacteria have the ability to degrade and metabolize them, suggesting the potential of biotechnologies based on plastic biodegradation. Polypropylene (PP), one of the most consumed plastics, is somewhat difficult to degrade under natural conditions, but scientists have made efforts in using other microbes and materials to enhance its biodegradation. Current methods such as gravimetric analysis and physical characterization are not sufficient to confirm the biodegradation of PP, so new techniques need to be explored. Further studies are also needed to investigate plastic-degrading microorganisms and improve enzymatic strategies.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Article Agricultural Engineering

Biobased plasticizer and cellulose nanocrystals improve mechanical properties of polylactic acid composites

Martin Eichers et al.

Summary: Polylactic acid (PLA) is a commercially available biopolymer that is widely used in additive manufacturing. However, its low ductility and impact strength limit its application in commercial plastic products. This research aims to improve the mechanical properties of PLA composites by using biobased materials. The addition of cellulose nanocrystals (CNC) and distillers dried grains with solubles (DDGS), as well as polyethylene glycol (PEG) and maleic anhydride (MA), was found to enhance the mechanical and ductile properties of PLA. The results suggest that the incorporation of CNC, plasticizer, and coupling agent can improve the physical and mechanical properties of PLA composites.

INDUSTRIAL CROPS AND PRODUCTS (2022)

添加到收藏夹

Article Agricultural Engineering

Interfacial improvement of poly (lactic acid)/tannin acetate composites via radical initiated polymerization

Jingjing Liao et al.

Summary: Bio-composites based on tannin acetate and polylactic acid (PLA) were successfully prepared with improved molecular weight, Young's modulus, and tensile strength, showing strong interfacial adhesion. Enhanced thermal stability and crystallinity were observed, along with a more hydrophobic characteristic suitable for food packaging applications.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Article Chemistry, Applied

Application of modified vegetable oil for improvement of biodegradable materials based on thermoplastic starch and polylactic acid

M. Bohorquez-Ayala et al.

Summary: The study evaluated the physicochemical and morphological properties of biodegradable materials obtained from TPS, PLA and ESO. The addition of ESO improved the moisture content, surface wettability, mechanical properties, and structural properties of the materials. This suggests potential for use in food packaging with low moisture content.

REVISTA MEXICANA DE INGENIERIA QUIMICA (2021)

添加到收藏夹

Article Food Science & Technology

Effect of Peroxide on Compatibility, Microstructure, Rheology, Crystallization, and Mechanical Properties of PBS/Waxy Starch Composites

Yue Yan et al.

Summary: Polybutylene succinate (PBS)/waxy starch (WS)/dibenzoyl peroxide (BPO) bio-composites were prepared via one-step blending, resulting in improved compatibility between PBS and WS with the aid of BPO in forming a crosslinked graft copolymer (WS-g-PBS), leading to significantly enhanced mechanical properties of the composites.

STARCH-STARKE (2021)

添加到收藏夹

Article Agricultural Engineering

Technology and mechanism of enhanced compatibilization of polylactic acid-grafted glycidyl methacrylate

Xiaoxue Han et al.

Summary: The study successfully prepared a bagasse cellulose composite material based on PLA, and demonstrated the positive impact of PLAGMA graft product on the toughness of PLA. Experimental results showed that the composite material still possessed excellent mechanical properties with 25% PLA-GMA addition and 40% BC addition.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Article Polymer Science

Interfacial improvements in cellulose nanofibers reinforced polylactide bionanocomposites prepared by in situ reactive extrusion

Feng-Jiao Li et al.

Summary: In-situ grafting of PLA onto cellulose nanofibers using DCP as initiator enhanced the interfacial adhesion and mechanical properties of the resulting bionanocomposites, with significant improvements in tensile modulus, strength, elongation at break, and impact strength. The increased crystallinity of the grafted CNF-g-PLA and improved melt strength of the nanocomposites contribute to the enhanced properties.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Storage stability of the oxygen plasma-modified PLA film

J. Izdebska-Podsiadly et al.

Summary: Extensive research was conducted on the storage stability of oxygen plasma-treated PLA film, revealing the best wettability after 2 and 10 minutes of activation time. The degree of hydrophobic recovery depends on treatment time and is most stable for 6 minutes. PLA hydrophobic recovery reached its peak after a storage period of 14 days.

BULLETIN OF MATERIALS SCIENCE (2021)

添加到收藏夹

Article Engineering, Environmental

Preparation Characterization of Modified Poly(Lactic Acid) Using Dicumyl Peroxide and Tetraglycidyl Diamino Diphenyl Methane

Sung Wook Hwang et al.

Summary: Poly(lactic acid) (PLA) was modified with dicumyl peroxide (DCP) and tetraglycidyl diamino diphenyl methane (TGDDM) to improve melt viscosity and molecular weight. While DCP led to branching or crosslinking and decreased melt flow index, TGDDM resulted in chain extension or branching and increased number- and weight-average molecular weights. The mechanical properties of modified PLA showed marginal changes, with slight decreases in elongation at break observed.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Polymer Science

Structural Features and Properties' Characterization of Polylactic Acid/Natural Rubber Blends with Epoxidized Soybean Oil

Andrey Burkov et al.

Summary: The study successfully enhanced the compatibility of the PLA and NR blends using epoxidized soybean oil as a natural plasticizer and compatibilizer, resulting in samples with improved phase compatibility and enhanced thermal stability of the novel material.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effect of multi-functional epoxy chain extender on the weathering resistance performance of Poly(butylene adipate-co-terephthalate) (PBAT)

Duo Tang et al.

Summary: The effects of multi-functional epoxy chain extender (Joncryl ADR 4370) content on the degradation, mechanical properties, and molecular weight of poly(butylene adipate-co-terephthalate) (PBAT) were investigated through natural and artificial weathering processes. The degradation mechanism of PBAT during weathering is mainly photo-degradation and hydrolyzation. With increasing chain extender content, the degradation rate of PBAT increases, while the loss velocity of tensile strength decreases. The formation of a crosslinked network structure due to excessive chain extenders plays a significant role in maintaining tensile strength during degradation.

POLYMER TESTING (2021)

添加到收藏夹

Article Thermodynamics

Influence of the combination of nucleating agent and plasticizer on the non-isothermal crystallization kinetics and activation energies of poly(lactic acid)

Li Chen et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites

Xiaodong Xu et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Two-Step Chain Extension using Joncryl and PMDA on the Rheological Properties of Poly (lactic acid)

Nasrin Yahyaee et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

添加到收藏夹

Article Polymer Science

Improvement of PLA film ductility by plasticization with epoxidized karanja oil

D. Garcia-Garcia et al.

POLYMER DEGRADATION AND STABILITY (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

The effect of triethyl citrate on the dispersibility and water vapor sorption behavior of polylactic acid/zeolite composites

Miji Lee et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Engineering, Chemical

Improvement of Compatibility and Mechanical Performances of PLA/PBAT Composites with Epoxidized Soybean Oil as Compatibilizer

Yi Han et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Engineering, Manufacturing

Interfacial compatibilization via in-situ polymerization of epoxidized soybean oil for bamboo fibers reinforced poly(lactic acid) biocomposites

Tingting Chen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cynara cardunculus Biomass Recovery: An Eco-Sustainable, Nonedible Resource of Vegetable Oil for the Production of Poly(lactic acid) Bioplasticizers

Rosa Turco et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

添加到收藏夹

Article Polymer Science

Toughening polylactide by direct blending of cellulose nanocrystals and epoxidized soybean oil

Sakil Mahmud et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

添加到收藏夹

Article Polymer Science

Preparation and characterization of poly(lactic acid)/poly(ethylene oxide) blend film: effects of poly(ethylene oxide) and poly(ethylene glycol) on the properties

Debarghya Saha et al.

POLYMER INTERNATIONAL (2019)

添加到收藏夹

Article Polymer Science

The Consequence of Epoxidized Soybean Oil in the Toughening of Polylactide and Micro-Fibrillated Cellulose Blend

Sakil Mahmud et al.

POLYMER SCIENCE SERIES A (2019)

添加到收藏夹

Article Polymer Science

Balancing performance of epoxidized soybean oil (ESO)/poly(lactic acid) composites: Synergistic effects of carbon nanotubes and tannic acid-induced crosslinking of ESO

W. Liu et al.

EXPRESS POLYMER LETTERS (2019)

添加到收藏夹

Article Engineering, Chemical

Influence of Multiwalled Carbon Nanotubes on Biodegradable Poly(lactic acid) Nanocomposites for Electroactive Shape Memory Actuator

Raja Mohan et al.

ADVANCES IN POLYMER TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Manufacturing of Thermally Remoldable Blends from Epoxidized Soybean Oil and Poly(lactic acid) via Dynamic Cross-Linking in a Twin-Screw Extruder

Wendi Liu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Article Agricultural Engineering

Preparation and characterization of biodegradable and compostable PLA/TPS/ESO compositions

A. Przybytek et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

添加到收藏夹

Article Agricultural Engineering

Preparation and characterization of poly(lactic acid) plasticized with vegetable oils and reinforced with sisal fibers

A. Orue et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

添加到收藏夹

Article Polymer Science

An efficient plasticization method for poly(lactic acid) using combination of liquid-state and solid-state plasticizers

Haichao Huang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Production and characterization of sustainable poly(lactic acid)/functionalized-eggshell composites plasticized by epoxidized soybean oil

Junjun Kong et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Polymer Science

PLA/ESO/MWCNT nanocomposite: a study on mechanical, thermal and electroactive shape memory properties

Surya Raghunath et al.

JOURNAL OF POLYMER RESEARCH (2018)

添加到收藏夹

Article Polymer Science

Tannic acid-induced crosslinking of epoxidized soybean oil for toughening poly(latic acid) via dynamic vulcanization

Wendi Liu et al.

POLYMER (2018)

添加到收藏夹

Article Polymer Science

Influence of liquid media on the craze initiation in amorphous polylactide

E. S. Trofimchuk et al.

POLYMER (2018)

添加到收藏夹

Article Polymer Science

Heat Resistant and Mechanical Properties of Biodegradable Poly(Lactic Acid)/Poly(Butylene Succinate) Blends Crosslinked by Polyaryl Polymethylene Isocyanate

Yanping Hao et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Physical

Interface Bond Improvement of Sisal Fibre Reinforced Polylactide Composites with Added Epoxy Oligomer

Mingyang Hao et al.

MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

The effect of MDI on the structure and mechanical properties of poly(lactic acid) and poly(butylene adipate-co-butylene terephthalate) blends

Hongwei Pan et al.

RSC ADVANCES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Toughening of nanocelluose/PLA composites via bio-epoxy interaction: Mechanistic study

Xiangtao Meng et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Review Polymer Science

How Green is Your Plasticizer?

Roya Jamarani et al.

POLYMERS (2018)

添加到收藏夹

Article Agricultural Engineering

Plasticization effect of epoxidized cottonseed oil (ECSO) on poly(lactic acid)

Alfredo Carbonell-Verdu et al.

INDUSTRIAL CROPS AND PRODUCTS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

High Performance and Thermal Processable Dicarboxylic Acid Cured Epoxidized Plant Oil Resins through Dynamic Vulcanization with Poly(lactic acid)

Tong-Hui Zhao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

添加到收藏夹

Article Polymer Science

Evaluation of some eco-friendly plasticizers for PLA films processing

Raluca N. Darie-Nita et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

添加到收藏夹

Article Polymer Science

Epoxidized soybean oil-plasticized poly(lactic acid) films performance as impacted by storage

Cheng Xing et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

添加到收藏夹

Review Polymer Science

Petro-Based and Bio-Based Plasticizers: Chemical Structures to Plasticizing Properties

Maeva Bocque et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Plasticizing effect of biobased epoxidized fatty acid esters on mechanical and thermal properties of poly(lactic acid)

J. M. Ferri et al.

JOURNAL OF MATERIALS SCIENCE (2016)

添加到收藏夹

Article Polymer Science

Poly(lacticacid)/thermoplastic starch sheets: effect of adipate esters on the morphological, mechanical and barrier properties

Marianne Ayumi Shirai et al.

POLIMEROS-CIENCIA E TECNOLOGIA (2016)

添加到收藏夹

Article Engineering, Chemical

Mechanical, thermal, and morphology properties of poly(lactic acid) plasticized with poly(ethylene glycol) and epoxidized palm oil hybrid plasticizer

Buong Woei Chieng et al.

POLYMER ENGINEERING AND SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dynamic vulcanization of castor oil in a polylactide matrix for toughening

Tong-Hui Zhao et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Polymer Science

A Toughened PLA/Nanosilica Composite Obtained in the Presence of Epoxidized Soybean Oil

Zhu Xiong et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Compatibilization strategies in poly(lactic acid)-based blends

Jian-Bing Zeng et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Supertough Polylactide Materials Prepared through In Situ Reactive Blending with PEG-Based Diacrylate Monomer

Huagao Fang et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Polymer Science

Morphology, Rheology, Crystallization Behavior, and Mechanical Properties of Poly(lactic acid)/Poly(butylene succinate)/Dicumyl Peroxide Reactive Blends

Deyun Ji et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

添加到收藏夹

Article Polymer Science

Melting of Conformationally Disordered Crystals (α′-Phase) of Poly(L-lactic acid)

Rene Androsch et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Continuous Blending Approach in the Manufacture of Epoxidized SoybeanPlasticized Poly(lactic acid) Sheets and Films

Shalini Vijayarajan et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2014)

添加到收藏夹

Article Polymer Science

In-situ compatibilization of poly(lactic acid) and poly(butylene adipate-co-terephthalate) blends by using dicumyl peroxide as a free-radical initiator

P. Ma et al.

POLYMER DEGRADATION AND STABILITY (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of epoxidized sunflower oil on polylactic acid properties

M. M. Wadhi et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2014)

添加到收藏夹

Article Polymer Science

Thermal, mechanical and morphological characterization of plasticized PLA-PHB blends

Mohamed A. Abdelwahab et al.

POLYMER DEGRADATION AND STABILITY (2012)

添加到收藏夹

Article Engineering, Chemical

Effect of 4,4′-methylenediphenyl diisocyanate on thermal and mechanical properties of Bioflex/lactic acid polycondensate blends

A. Gregorova et al.

ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2012)

添加到收藏夹

Article Polymer Science

Mechanical and Thermal Properties of Biocomposites from Poly(lactic acid) and DDGS

Yonghui Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Properties of epoxidized palm oil plasticized polytlactic acid

Emad A. Jaffar Al-Mulla et al.

JOURNAL OF MATERIALS SCIENCE (2010)

添加到收藏夹

Article Polymer Science

Mechanical and Rheological Properties of Epoxidized Soybean Oil Plasticized Poly(lactic acid)

Yu-Qiong Xu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

添加到收藏夹

Article Polymer Science

Thermal, mechanical and rheological properties of poly (lactic acid)/epoxidized soybean oil blends

Fathilah Ali et al.

POLYMER BULLETIN (2009)

添加到收藏夹

Article Polymer Science

Synthesis and characterization of biodegradable lactic acid-based polymers by chain extension

ShuYing Gu et al.

POLYMER INTERNATIONAL (2008)

添加到收藏夹

Review Polymer Science

Toughening polylactide

Kelly S. Anderson et al.

POLYMER REVIEWS (2008)

添加到收藏夹

Article Polymer Science

Poly(urethane-oxazolidone): Synthesis, characterisation and shape memory properties

J. Dyana Merline et al.

EUROPEAN POLYMER JOURNAL (2007)

添加到收藏夹

Article Polymer Science

Plasticization of semicrystalline poly(L-lactide) with poly(propylene glycol)

E. Piorkowska et al.

POLYMER (2006)

添加到收藏夹

Article Polymer Science

Plasticization of poly(lactic acid) with oligomeric malonate esteramides:: Dynamic mechanical and thermal film properties

N Ljungberg et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2005)

添加到收藏夹

Article Polymer Science

Starch-based biodegradable blends:: morphology and interface properties

E Schwach et al.

POLYMER INTERNATIONAL (2004)

添加到收藏夹

In situ compatibilization of poly(L-lactic acid)/epoxidized soybean oil bio-blends by reactive additives

相关参考文献

导出引文

分享论文