4.8 Article

Accelerated Stress Factors Based Nonlinear Wiener Process Model for Lithium-Ion Battery Prognostics

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Automation & Control Systems

Joint State-of-Charge and State-of-Available-Power Estimation Based on the Online Parameter Identification of Lithium-Ion Battery Model

Wenjie Zhang et al.

Summary: This article presents a joint state-of-charge (SOC) and state-of-available-power (SOAP) estimation method based on online battery model parameter identification. The improved ABSE achieves higher accuracy than the ABSE at different battery aging states, and it can accurately estimate the SOC and SOAB-based SOAP.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Battery Fault Diagnosis for Electric Vehicles Based on Voltage Abnormality by Combining the Long Short-Term Memory Neural Network and the Equivalent Circuit Model

Da Li et al.

Summary: This article presents a novel battery fault diagnosis method that combines neural network and equivalent circuit model, utilizing modified adaptive boosting and pre-judging models to enhance accuracy and reliability. Considering driver behavior influence on battery systems, the method can assess potential failure risk and issue early thermal runaway warnings. Real-world operation data from China's National Monitoring and Management Center for New Energy Vehicles is used to verify the method's robustness and accuracy, showing precise fault diagnosis and thermal runaway cell location.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Engineering, Industrial

Remaining Useful Life Prediction of Lithium-ion Batteries Based on Wiener Process Under Time-Varying Temperature Condition

Xiaodong Xu et al.

Summary: This paper proposes a novel prediction method for remaining useful life (RUL) of lithium-ion battery under time-varying temperature condition based on Arrhenius temperature model and Wiener process. The aging model is developed using maximum likelihood estimation and genetic algorithm, leading to the derivation of probability density function (PDF) of RUL. The effectiveness of the method is verified through a case study, demonstrating higher accuracy and smaller uncertainty.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Article Engineering, Industrial

Remaining useful life prediction for multi-phase deteriorating process based on Wiener process

Guobo Liao et al.

Summary: The paper presents a multi-phase degradation model based on Wiener process and uses a Bayesian approach to integrate historical and real-time data for remaining useful life prediction. By estimating hyperparameters using the expectation maximization algorithm, model parameters can be effectively updated to account for multiple random change points.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Article Thermodynamics

Voltage-temperature health feature extraction to improve prognostics and health management of lithium-ion batteries

Jin-zhen Kong et al.

Summary: This paper proposes a voltage-temperature health feature extraction method to improve PHM of lithium-ion batteries. This method can accurately estimate and predict the health conditions and remaining useful life of lithium-ion batteries. Results show that this method provides higher accuracies than existing methods.

ENERGY (2021)

Article Engineering, Mechanical

Two-stage physics-based Wiener process models for online RUL prediction in field vibration data

Bingxin Yan et al.

Summary: This study proposes a two-stage physics-based Wiener process model that integrates fatigue crack mechanisms, crack growth laws, and other minor factors, achieving high accuracy in remaining useful life (RUL) prediction. By jointly employing online change point detection, parameter estimation, and RUL prediction, a general prognostic framework is formulated with good statistical inference and applicability in general nonlinear systems. The joint implementation of an offline two-step parameter estimation method and online Bayesian update method allows for high precision RUL prediction.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Automation & Control Systems

Joint Modeling of Degradation and Lifetime Data for RUL Prediction of Deteriorating Products

Jiawen Hu et al.

Summary: This article addresses the issue of system degradation and lifetime data analysis for remaining useful life (RUL) prediction by utilizing a Bayesian framework and a particle filter method. The proposed model outperforms existing methods in RUL prediction accuracy, as demonstrated through case studies on lead-acid batteries and digital communication systems.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Article Computer Science, Hardware & Architecture

Prognostics Based on Stochastic Degradation Process: The Last Exit Time Perspective

Jian-Xun Zhang et al.

Summary: Degradation-model-based RUL estimation is crucial for effective prognostic and health management, with stochastic-process-based methods widely preferred for capturing stochastic dynamics. Existing studies often underestimate RUL using the conservative first passage time (FPT) method, especially in nonmonotonic stochastic degradation processes. By introducing the last exit time (LET) perspective, this study provides a new definition for lifetime/RUL estimation, illustrated using the Wiener-process-based model with examples and solutions. The proposed method shows potential in preventing premature maintenance and resource wastage by avoiding conservative results.

IEEE TRANSACTIONS ON RELIABILITY (2021)

Article Engineering, Electrical & Electronic

A Novel Consistency Evaluation Method for Series-Connected Battery Systems Based on Real-World Operation Data

Qiushi Wang et al.

Summary: This article presents a cell inconsistency evaluation model for series-connected battery systems based on real-world EV operation data, utilizing consistency indicators and a robust regression method to effectively assess the parameter inconsistency state of the battery system.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2021)

Article Engineering, Multidisciplinary

Remaining useful life prediction for multivariable stochastic degradation systems with non-Markovian diffusion processes

Xiaopeng Xi et al.

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL (2020)

Article Automation & Control Systems

Health-Aware Multiobjective Optimal Charging Strategy With Coupled Electrochemical-Thermal-Aging Model for Lithium-Ion Battery

Yizhao Gao et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)

Editorial Material Nanoscience & Nanotechnology

Machine learning for continuous innovation in battery technologies

Muratahan Aykol et al.

NATURE REVIEWS MATERIALS (2020)

Article Chemistry, Physical

Battery life estimation based on cloud data for electric vehicles

Kai Li et al.

JOURNAL OF POWER SOURCES (2020)

Article Energy & Fuels

Data-Driven Online Health Estimation of Li-Ion Batteries Using A Novel Energy-Based Health Indicator

Wei Liu et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2020)

Review Green & Sustainable Science & Technology

A comprehensive review of battery modeling and state estimation approaches for advanced battery management systems

Yujie Wang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Energy & Fuels

Battery heating for lithium-ion batteries based on multi-stage alternative currents

Lei Zhang et al.

JOURNAL OF ENERGY STORAGE (2020)

Article Engineering, Electrical & Electronic

Remaining Useful Life Prediction of Lithium-Ion Batteries Based on Conditional Variational Autoencoders-Particle Filter

Ruihua Jiao et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Review Computer Science, Artificial Intelligence

Predicting the state of charge and health of batteries using data-driven machine learning

Man-Fai Ng et al.

NATURE MACHINE INTELLIGENCE (2020)

Article Automation & Control Systems

Lithium-Ion Battery Remaining Useful Life Prediction With Box-Cox Transformation and Monte Carlo Simulation

Yongzhi Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Article Automation & Control Systems

Gaussian Process Regression for In Situ Capacity Estimation of Lithium-Ion Batteries

Robert R. Richardson et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)

Review Energy & Fuels

A review on various temperature-indication methods for Li-ion batteries

L. H. J. Raijmakers et al.

APPLIED ENERGY (2019)

Article Engineering, Multidisciplinary

The transformed inverse Gaussian process as an age- and state-dependent degradation model

Weiwen Peng et al.

APPLIED MATHEMATICAL MODELLING (2019)

Article Automation & Control Systems

A Novel Estimation Method for the State of Health of Lithium-Ion Battery Using Prior Knowledge-Based Neural Network and Markov Chain

Houde Dai et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Review Multidisciplinary Sciences

Recycling lithium-ion batteries from electric vehicles

Gavin Harper et al.

NATURE (2019)

Review Green & Sustainable Science & Technology

Data-driven health estimation and lifetime prediction of lithium-ion batteries: A review

Yi Li et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Review Management

Degradation data analysis and remaining useful life estimation: A review on Wiener-process-based methods

Zhengxin Zhang et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2018)

Article Automation & Control Systems

Auxiliary Particle Filtering-Based Estimation of Remaining Useful Life of IGBT

Moinul Shahidul Haque et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

Article Automation & Control Systems

Impedance-Based Battery Management System for Safety Monitoring of Lithium-Ion Batteries

Bliss G. Carkhuff et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

Article Computer Science, Hardware & Architecture

Bayesian Approach for Two-Phase Degradation Data Based on Change-Point Wiener Process With Measurement Errors

Pingping Wang et al.

IEEE TRANSACTIONS ON RELIABILITY (2018)

Article Engineering, Electrical & Electronic

Long Short-Term Memory Recurrent Neural Network for Remaining Useful Life Prediction of Lithium-Ion Batteries

Yongzhi Zhang et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2018)

Review Engineering, Mechanical

Machinery health prognostics: A systematic review from data acquisition to RUL prediction

Yaguo Lei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Article Engineering, Industrial

Degradation modeling and RUL prediction using Wiener process subject to multiple change points and unit heterogeneity

Yuxin Wen et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Article Engineering, Electrical & Electronic

Co-Estimation of State of Charge and State of Health for Lithium-Ion Batteries Based on Fractional-Order Calculus

Xiaosong Hu et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2018)

Article Engineering, Mechanical

Nonlinear-drifted Brownian motion with multiple hidden states for remaining useful life prediction of rechargeable batteries

Dong Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Engineering, Electrical & Electronic

Remaining Discharge Time Prognostics of Lithium-Ion Batteries Using Dirichlet Process Mixture Model and Particle Filtering Method

Yu Jinsong et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2017)

Article Engineering, Electrical & Electronic

Remaining Useful Life Prediction of Lithium-Ion Batteries Based on Spherical Cubature Particle Filter

Dong Wang et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2016)

Article Chemistry, Physical

Lithium battery aging model based on Dakin's degradation approach

Issam Baghdadi et al.

JOURNAL OF POWER SOURCES (2016)

Article Automation & Control Systems

An Adaptive Prognostic Approach via Nonlinear Degradation Modeling: Application to Battery Data

Xiao-Sheng Si

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

Article Engineering, Industrial

A new class of Wiener process models for degradation analysis

Zhi-Sheng Ye et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Article Computer Science, Hardware & Architecture

Uncertainty Quantification in Remaining Useful Life Prediction Using First-Order Reliability Methods

Shankar Sankararaman et al.

IEEE TRANSACTIONS ON RELIABILITY (2014)

Article Chemistry, Physical

Temperature dependent ageing mechanisms in Lithium-ion batteries - A Post-Mortem study

Thomas Waldmann et al.

JOURNAL OF POWER SOURCES (2014)

Article Computer Science, Hardware & Architecture

Degradation Data Analysis Using Wiener Processes With Measurement Errors

Zhi-Sheng Ye et al.

IEEE TRANSACTIONS ON RELIABILITY (2013)

Review Chemistry, Physical

A review on the key issues for lithium-ion battery management in electric vehicles

Languang Lu et al.

JOURNAL OF POWER SOURCES (2013)

Article Engineering, Industrial

Prognostics 101: A tutorial for particle filter-based prognostics algorithm using Matlab

Dawn An et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2013)

Article Computer Science, Hardware & Architecture

Remaining Useful Life Estimation Based on a Nonlinear Diffusion Degradation Process

Xiao-Sheng Si et al.

IEEE TRANSACTIONS ON RELIABILITY (2012)

Review Management

Remaining useful life estimation - A review on the statistical data driven approaches

Xiao-Sheng Si et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2011)