☆ 4.6 Article

Luminescence-Tunable High-Power White Light-Emitting Diodes Through Dam-Adjusted Ceramic Substrate

IEEE TRANSACTIONS ON ELECTRON DEVICES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Electrochemistry

Computational and experiments exploration of convection on Cu filling characteristics of multiple aspect-ratio micro through-holes

Qing Wang et al.

Summary: In this study, a combination of computational simulation and experiments were conducted to investigate the convection and filling characteristics of micro through-holes with different aspect ratios (ARs). It was found that the strength of convection affects the adsorption of additives and subsequently influences the electrodeposition and filling of copper. The AR of 3.33:1 was identified as an important cut-off point, where micro through-holes with AR higher than 3.33:1 can be fully filled.

ELECTROCHIMICA ACTA (2022)

添加到收藏夹

Article Materials Science, Ceramics

Patterned glass ceramic design for high-brightness high-color-quality laser-driven lightings

Qiugui Huang et al.

Summary: A new architecture combining patterned package design and phosphor wheel was proposed to address the challenge of achieving good photometric and chromatic performances in laser-driven lightings. The fabricated composite with CaAlSiN3:Eu2+ (CASN:Eu) glass ceramic film (GCF) on Y3Al5O12:Ce3+ (YAG:Ce) GC plate demonstrated excellent luminescent features and color chromaticity tunability.

JOURNAL OF ADVANCED CERAMICS (2022)

添加到收藏夹

Article Chemistry, Physical

Enhancing opto-thermal performances of white laser lighting by high reflective phosphor converter

Yun Mou et al.

Summary: This study investigates a high reflective converter to enhance the opto-thermal performances of white laser lighting. By utilizing a high reflectivity BN glass composite and an Al substrate with high thermal conductivity, the converter achieves higher luminous flux and lower surface temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Deep-Ultraviolet LEDs With All-Inorganic and Hermetic Packaging by 3D Ceramic Substrate

Jinglong Liu et al.

Summary: An all-inorganic and hermetic packaging technology was proposed for deep-ultraviolet light-emitting diodes, bonding the quartz cap on the 3D ceramic substrate at low temperature. The packaging structure showed low air leakage rate and high tensile strength. After accelerated aging test, the packaged DUV-LEDs demonstrated better stability compared to the unpackaged reference.

IEEE PHOTONICS TECHNOLOGY LETTERS (2021)

添加到收藏夹

Article Engineering, Chemical

Highly improved mechanical and thermal properties of alkali silicate and graphene nanoplatelet composite adhesives

Gyu Hyeon Shim et al.

Summary: In this study, the addition of graphene nanoplatelets into mixed silicates improved the adhesion strength and thermal properties of the material. The specific surface area of graphene nanoplatelets played a significant role in interface formation, load transfer, and stress dispersion. At elevated temperatures, the thermal conductivity of the modified silicate with graphene nanoplatelets was significantly increased.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical behaviors of additives in high Cu(II) concentration solution for high-aspect-ratio through ceramic holes filling

Qing Wang et al.

Summary: The research showed that the filling performance of PEG-SH110-NBT in high Cu(II) solution is affected by convection, with SH110 effectively improving plating efficiency in the designed high Cu(II) plating solution. PEG and NBT have a synergistic effect on inhibition, while NBT shows a leveling effect only in the presence of SH110.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Study on Convective Flow Behaviors of Phosphor Particles During Curing Process of Silicone and the Influences on the Optical Performance of White LEDs

Xinrui Ding et al.

Summary: The CCT variation of phosphor-converted LEDs after curing is influenced by the depth of the device cup, with shallower cups resulting in increased CCT. Additionally, inclined walls can increase the silicone flow path length and inhibit particle flow downward to some extent. These findings can enhance understanding of CCT variation and guide LED encapsulation structure design for improved color quality.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

YAG:Ce3+ Transparent Ceramic Phosphors Brighten the Next-Generation Laser-Driven Lighting

Qi Yao et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Enhancing Luminous Efficiency of Quantum Dot-Based Chip-on-Board Light-Emitting Diodes Using Polystyrene Fiber Mats

Guanwei Liang et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2020)

添加到收藏夹

Review Optics

Machine Learning and Digital Twin Driven Diagnostics and Prognostics of Light-Emitting Diodes

Mesfin Seid Ibrahim et al.

LASER & PHOTONICS REVIEWS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Low-Temperature Fabrication of Three-Dimensional Ceramic Substrate by Molding Inorganic Aluminosilicate Paste

Hao Cheng et al.

JOURNAL OF ELECTRONIC PACKAGING (2019)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of 3D structures via direct ink writing of kaolin/graphene oxide composite suspensions at ambient temperature

Qinglei Sun et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Preparation of three-dimensional ceramic substrate by multiple electroforming for UV-LED hermetic packaging

Zizhou Yang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review-A Review on Phosphor in Glass as a High Power LED Color Converter

Woon Jin Chung et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

White Light-Emitting Diodes With Ultrahigh Color Rendering Index by Red/Green Phosphor Layer Configuration Structure

Ange Wang et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

White Light-Emitting Diodes With High Color Quality Fabricated Using Phosphor-in-Glass Integrated With Liquid-Type Quantum Dot

Hao Wang et al.

IEEE ELECTRON DEVICE LETTERS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Stable and efficient all-inorganic color converter based on phosphor in tellurite glass for next-generation laser-excited white lighting

Yang Peng et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creation of three-dimensional structures by direct ink writing with kaolin suspensions

Qinglei Sun et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Realization of Conformal Phosphor Coating by Ionic Wind Patterning for Phosphor-Converted White LEDs

Jiading Wu et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Luminous Properties and Thermal Reliability of Screen-Printed Phosphor-in-Glass-Based White Light-Emitting Diodes

Yang Peng et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2017)

添加到收藏夹

Article Chemistry, Physical

Facile preparation of patterned phosphor-in-glass with excellent luminous properties through screen-printing for high-power white light-emitting diodes

Yang Peng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Void-free and high-speed filling of through ceramic holes by copper electroplating

Zhen Chen et al.

MICROELECTRONICS RELIABILITY (2017)

添加到收藏夹

Review Thermodynamics

Heat and fluid flow in high-power LED packaging and applications

Xiaobing Luo et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Highly thermal-stable warm w-LED based on Ce:YAG PiG stacked with a red phosphor layer

Zebin Lin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Review Materials Science, Ceramics

Advances in transparent glass-ceramic phosphors for white light-emitting diodes-A review

Daqin Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Synthesis and characterization of YAG:Ce phosphors for white LEDs

V. Tucureanu et al.

OPTO-ELECTRONICS REVIEW (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Properties of transparent Ce:YAG ceramic phosphors for white LED

S. Nishiura et al.

OPTICAL MATERIALS (2011)

添加到收藏夹

Review Materials Science, Ceramics

Overview on fabrication of three-dimensional structures in multi-layer ceramic substrate

L. E. Khoong et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

添加到收藏夹

Article Engineering, Electrical & Electronic

Methods of Increasing Luminous Efficiency of Phosphor-Converted LED Realized by Conformal Phosphor Coating

Bin Hou et al.

JOURNAL OF DISPLAY TECHNOLOGY (2009)

添加到收藏夹

Review Engineering, Electrical & Electronic

Status and prospects for phosphor-based white LED packaging

Zongyuan Liu et al.

FRONTIERS OF OPTOELECTRONICS (2009)

添加到收藏夹

Article Engineering, Electrical & Electronic

Studies of Phosphor Concentration and Thickness for Phosphor-Based White Light-Emitting-Diodes

Nguyen T. Tran et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2008)

添加到收藏夹

Article Engineering, Electrical & Electronic

Illumination with solid state lighting technology

DA Steigerwald et al.

IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.