4.5 Article

Experimental Study on Grouting and Flow Characteristics of Rough Vertical Fractures

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Characterizing clay textures and their impact on the reservoir using deep learning and Lattice-Boltzmann simulation applied to SEM images

Naser Golsanami et al.

Summary: This study provides a detailed quantitative characterization of clays in hydrocarbon reservoirs using deep learning and SEM images, and investigates the impact of clays on reservoir fluid flow. The results show that clays can significantly reduce reservoir porosity and permeability, shedding new light on the detailed impacts of clay minerals on reservoir quality.

ENERGY (2022)

Article Energy & Fuels

Numerical investigation of unpropped fracture closure process in shale based on 3D simulation of fracture surface

Cong Lu et al.

Summary: This study established a 3D simulation method based on core experiments and reverse engineering technology to simulate unpropped fracture closure process. The numerical results showed that fracture roughness and slippage degree have an impact on the closure process, while Young's modulus plays a positive role in resisting closure under high stress state.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Article Energy & Fuels

A new proposed method for observing fluid in rock fractures using enhanced x-ray images from digital radiography

Huan Sun et al.

Summary: This study proposes a visualization method for fluid in rock fractures using enhanced X-ray image digital radiography (EXIDR) and reveals the flow mechanism and failure characteristics of carbonate rocks and red bed mudstone under different engineering backgrounds through coupled hydromechanical tests.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2022)

Article Engineering, Geological

On the effective stress coefficient of single rough rock fractures

Zhihong Zhao et al.

Summary: The effective stress coefficient is crucial for predicting hydromechanical coupling behavior in water-bearing rock fractures. A new model based on the ratio of water-covered fracture surface to total area was proposed and successfully integrated into a constitutive model, showing that the coefficient is less than 1 and decreases with increasing stress-water pressure difference. The new model yielded similar results to Terzaghi's model at high stress levels but differed significantly at moderate stress levels, with implications for subsurface engineering.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Article Environmental Sciences

No-Flow Fraction (NFF) Permeability Model for Rough Fractures Under Normal Stress

Hoda Javanmard et al.

Summary: The study investigates the relationship between fracture permeability and geometry under normal loads, finding that aperture roughness can increase with applied stresses. By introducing the No-Flow Fraction (NFF) parameter, a new Cubic-law-based permeability model is proposed to significantly improve accuracy in permeability estimations. The new models provide permeability estimates accurate to within a factor of 2 of simulated permeability in majority of deformed fractures, compared to previous models with typical deviations of at least one order of magnitude.

WATER RESOURCES RESEARCH (2021)

Article Environmental Sciences

Reutilization of gangue wastes in underground backfilling mining: Overburden aquifer protection

Dan Ma et al.

Summary: Gangue backfilling mining (GBM) can effectively alleviate gangue pollution and protect overburden aquifers. The hydraulic properties and deformation behaviors of granular gangues were studied, showing that these properties vary with the original grain size grade and stress rate. An improved model based on fractal dimension was found to have better accuracy in predicting permeability evolution compared to the traditional Kruger model.

CHEMOSPHERE (2021)

Article Computer Science, Interdisciplinary Applications

Modeling of flow characteristics in 3D rough rock fracture with geometry changes under confining stresses

Yuedu Chen et al.

Summary: The study found that changes in fracture geometries due to increasing confine stress increase the heterogeneities of flow characteristics in 3D fractures, leading to variations in flow rates, streamlines, and water pressure. Streamlines become more channeled under high stress, while the increase in contact and occurrence of eddy flow enhance the nonlinearity of pressure drop.

COMPUTERS AND GEOTECHNICS (2021)

Article Energy & Fuels

Digital and experimental rock analysis of proppant injection into naturally fractured coal

Hamed Lamei Ramandi et al.

Summary: Proppant-laden fluid injection in naturally fractured coal samples did not significantly increase permeability due to proppant accumulation at the inlet creating a filter. Digital computation revealed a notable increase in permeability when accumulated proppants were excluded, indicating the importance of proppant size selection for effective hydraulic fracturing in coal seams.
Article Computer Science, Interdisciplinary Applications

Investigation of critical non-linear flow behavior for fractures with different degrees of fractal roughness

Guan Rong et al.

Summary: This study numerically investigates the non-linear flow behavior in rough fractures with shear dislocations using the multi-relaxation time lattice Boltzmann method. The results show that increasing surface roughness inhibits fracture flow, leading to a decrease in effective transmissivity. The non-linearity of fracture flow is enhanced with the tortuous flow-path and corner eddies during the closure process, and the anisotropic feature becomes more pronounced with increasing roughness parameter.

COMPUTERS AND GEOTECHNICS (2021)

Article Water Resources

A corrected cubic law for single-phase laminar flow through rough-walled fractures

Xupeng He et al.

Summary: This study provides a comprehensive evaluation and benchmark of the traditional cubic law and other 43 methods, proposing a new corrected cubic law model for improved prediction of hydraulic properties of fractures. Through high-resolution simulations and evaluation of numerical solutions, the superior accuracy and efficiency of the proposed model have been demonstrated.

ADVANCES IN WATER RESOURCES (2021)

Article Engineering, Geological

Evolution of contact area and aperture during the shearing process of natural rock fractures

M. A. Pirzada et al.

Summary: The study investigates the evolution of contact area and fracture aperture during the shearing process of rock discontinuities, revealing a complex process influenced by various factors such as initial surface mismatch, dilation, damage of asperities, and gouge production. The results have significant implications for predicting shearing behavior of faults and fractures by measuring the actual stresses acting on the fracture surfaces.

ENGINEERING GEOLOGY (2021)

Article Engineering, Geological

Natural Rock Fractures: From Aperture to Fluid Flow

Alejandro Cardona et al.

Summary: Fractures in rocks play a key role in establishing internal plumbing and preferential flow paths. Surface roughness and matedness of fractures determine the geometric aperture, with measurements showing a relation between roughness wavelength and amplitude consistent with fractal topography. Normal loading shifts the aperture distribution towards smaller sizes, while shear displacement affects mean and standard deviation of initially mated fractures. The cubic law is valid locally when fracture roughness follows a power law, aiding in numerical analyses of transmissivity. Flow trajectories redistribute with increasing normal stress, and shear displacement induces early aperture anisotropy in initially mated fractures that decreases with unmating. Transmissivity evolution can be accurately captured with power and logistic functions for normal stress and shear displacement, respectively. Positive feedback during reactive fluid flow heightens channeling, as supported by radial transmissivity measurements.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Article Engineering, Civil

Effect of fluid slippage on eddy growth and non-Darcian flow in rock fractures

Jia-Qing Zhou et al.

JOURNAL OF HYDROLOGY (2020)

Article Engineering, Geological

Experimental study on acoustic emission (AE) characteristics and crack classification during rock fracture in several basic lab tests

Kun Du et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Engineering, Geological

The influence of fracture geometry variation on non-Darcy flow in fractures under confining stresses

Yuedu Chen et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Article Computer Science, Interdisciplinary Applications

Nonlinear flow behavior through rough-walled rock fractures: The effect of contact area

Feng Xiong et al.

COMPUTERS AND GEOTECHNICS (2018)

Article Engineering, Geological

Experimental study on the effect of fracture geometric characteristics on the permeability in deformable rough-walled fractures

Yuedu Chen et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)

Article Environmental Sciences

Fracture network created by 3-D printer and its validation using CT images

Anna Suzuki et al.

WATER RESOURCES RESEARCH (2017)

Article Engineering, Geological

Linear flow behaviour of matched joints - case study on standard JRC profiles

Mahdi Zoorabadi et al.

GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2016)

Article Engineering, Geological

Nonlinear flow behavior at low Reynolds numbers through rough-walled fractures subjected to normal compressive loading

Jia-Qing Zhou et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

Article Multidisciplinary Sciences

Visualization of the complex structure and stress field inside rock by means of 3D printing technology

Yang Ju et al.

CHINESE SCIENCE BULLETIN (2014)

Article Geosciences, Multidisciplinary

Assessment of the validity of Stokes and Reynolds equations for fluid flow through a rough-walled fracture with flow imaging

Seung Hyun Lee et al.

GEOPHYSICAL RESEARCH LETTERS (2014)

Article Energy & Fuels

Estimation of tortuosity of fluid flow through a single fracture

S Murata et al.

JOURNAL OF CANADIAN PETROLEUM TECHNOLOGY (2003)

Article Engineering, Geological

Hydraulic characteristics of rough fractures in linear flow under normal and shear load

HS Lee et al.

ROCK MECHANICS AND ROCK ENGINEERING (2002)