☆ 3.8 Article

Innovation, disruptive technologies and transformation in vascular surgery

GEFASSCHIRURGIE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Peripheral Vascular Disease

Mixed reality for the assessment of aortoiliac anatomy in patients with abdominal aortic aneurysm prior to open and endovascular repair: Feasibility and interobserver agreement

Johannes Hatzl et al.

Summary: The study evaluated the feasibility and interobserver agreement of a Mixed Reality Viewer (MRV) in the assessment of aortoiliac vascular anatomy of abdominal aortic aneurysm (AAA) patients. The results showed that the MRV had equal or better interobserver agreement in assessing calcification, dilatation, tortuosity, and dilatation, while the Conventional viewer (CV) had better interobserver agreement in assessing patency. The CV also identified significantly more lumbar arteries.

VASCULAR (2023)

添加到收藏夹

Article Surgery

Applications of artificial intelligence for patients with peripheral artery disease

Fabien Lareyre et al.

Summary: This review summarizes the current knowledge on applications of artificial intelligence (AI) in patients with peripheral artery disease (PAD), discusses current limits, and highlights perspectives in the field.

JOURNAL OF VASCULAR SURGERY (2023)

添加到收藏夹

Article Surgery

Endovascular navigation with Fiber Optic RealShape technology

Giuseppe Panuccio et al.

Summary: FORS technology is a novel guidance technology that allows real-time three-dimensional visualization of endovascular repair, with the potential to reduce radiation exposure. This study reported the benefits and limitations of FORS technology based on data collected from 50 patients, and found that FORS-guided catheterization had a high success rate, shorter time, and lower radiation exposure compared to standard procedures.

JOURNAL OF VASCULAR SURGERY (2023)

添加到收藏夹

Article Radiology, Nuclear Medicine & Medical Imaging

Radiation-Free Thoracic Endovascular Aneurysm Repair with Fiberoptic and Electromagnetic Guidance: A Phantom Study

Malte Maria Sieren et al.

Summary: This study evaluated the feasibility and accuracy of a radiation-free implantation of a thoracic aortic stent graft. The procedure was successfully performed in an anthropomorphic phantom, and the navigation and handling of the device were rated accurately.

JOURNAL OF VASCULAR AND INTERVENTIONAL RADIOLOGY (2022)

添加到收藏夹

Article Clinical Neurology

Transcarotid access for remote robotic endovascular neurointerventions: a cadaveric proof-of-concept study

Marton Berczeli et al.

Summary: This proof-of-concept study demonstrates the setup and technical feasibility of transcarotid access for remote robot-assisted neurointerventions, such as carotid artery stenting and mechanical thrombectomy. It provides a direct and relatively rapid access route to deliver remote stroke treatment to the brain.

NEUROSURGICAL FOCUS (2022)

添加到收藏夹

Review Cardiac & Cardiovascular Systems

Virtual and Augmented Reality in Cardiovascular Care State-of-the-Art and Future Perspectives

Christian Jung et al.

Summary: Virtual reality and augmented reality have wide applications in cardiovascular education and treatment, with potential in various fields. However, there are technical challenges to overcome and ethical considerations to address, while ensuring the focus of physicians and patients.

JACC-CARDIOVASCULAR IMAGING (2022)

添加到收藏夹

Article Surgery

EndoNaut two-dimensional fusion imaging with a mobile C-arm for endovascular treatment of occlusive peripheral arterial disease

Caroline Caradu et al.

Summary: The present study demonstrated that the use of 2D fusion imaging technology can significantly reduce contrast volume and radiation dose in endovascular treatment of occlusive PAD. This technique resulted in a reduction of over 30% in operative parameters, without excessive training requirements, highlighting its potential benefits for endovascular revascularization in PAD.

JOURNAL OF VASCULAR SURGERY (2022)

添加到收藏夹

Article Surgery

Successful endovascular treatment of severe chronic mesenteric ischemia facilitated by intraoperative positioning system image guidance

Satish C. Muluk et al.

Summary: This article reports the initial experience of using the intraoperative positioning system (IOPS) for the treatment of chronic mesenteric ischemia (CMI). The study found that IOPS can be safely and effectively used, resulting in faster catheterization and reduced contrast load and radiation dose.

JOURNAL OF VASCULAR SURGERY CASES INNOVATIONS AND TECHNIQUES (2022)

添加到收藏夹

Article Imaging Science & Photographic Technology

Mixed-Reality-Assisted Puncture of the Common Femoral Artery in a Phantom Model

Christian Uhl et al.

Summary: This study evaluated the feasibility and positional error of a mixed-reality (MR)-assisted puncture of the common femoral artery using a commercially available navigation system in a phantom model. The results showed that MR-assisted puncture is feasible with acceptable positional errors in the model.

JOURNAL OF IMAGING (2022)

添加到收藏夹

Article Surgery

First in Human Clinical Feasibility Study of Endovascular Navigation with Fiber Optic RealShape (FORS) Technology

Joost A. van Herwaarden et al.

Summary: The FORS technology, as a new visualization tool, showed high feasibility and safety in clinical practice. Most navigational tasks using FORS enabled devices achieved technical success, with good user experience and reduced fluoroscopy time.

EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY (2021)

添加到收藏夹

Article Surgery

The Influence of 3D Printed Aortic Models on the Evolution of Physician Modified Stent Grafts for the Urgent Treatment of Thoraco-abdominal and Pararenal Aortic Pathologies

Daniela Branzan et al.

Summary: This study aimed to describe the outcomes of high risk patients with symptomatic or contained rupture of pararenal and thoraco-abdominal aortic aneurysms who underwent fenestrated endovascular aneurysm repair using physician modified stent grafts planned with 3D image analysis software and 3D printed aortic models. The results showed that this approach was feasible and safe, with high success rates and low complication rates.

EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY (2021)

添加到收藏夹

Review Surgery

A systematic review of three-dimensional printed template-assisted physician-modified stent grafts for fenestrated endovascular aneurysm repair

Jasamine Coles-Black et al.

Summary: 3D-printed templates offer a promising new avenue for assisting with fenestrations in PMSGs, particularly in urgent situations, with larger scale studies needed for validation.

JOURNAL OF VASCULAR SURGERY (2021)

添加到收藏夹

Review Surgery

Robotic endovascular surgery: current and future practice

Lucinda Cruddas et al.

Summary: Although endovascular robotic technology shows great promise in overcoming challenges of traditional techniques, there are still barriers in terms of technology, cost, and sustainability that need to be addressed for its scalability and widespread adoption. Collaboration among industry, clinicians, and patients is crucial for successful future development and dissemination of robotic technology.

SEMINARS IN VASCULAR SURGERY (2021)

添加到收藏夹

Review Medicine, General & Internal

Application of 3D Printing in Preoperative Planning

Nicole Segaran et al.

Summary: Preoperative planning is crucial for surgical success, and traditional 2D imaging may not accurately depict anatomical structures, leading to the need for innovative solutions like 3D printing.

JOURNAL OF CLINICAL MEDICINE (2021)

添加到收藏夹

Review Surgery

Applications of Head-Mounted Displays and Smart Glasses in Vascular Surgery

Fabien Lareyre et al.

Summary: Advances in virtual, augmented, and mixed reality have led to the development of wearable technologies such as head mounted displays and smart glasses. Studies have shown potential applications of these technologies in educating surgeons and enhancing surgical practices, particularly in the field of vascular surgery. Further technical improvements and clinical research are needed before widespread adoption in daily clinical practice.

ANNALS OF VASCULAR SURGERY (2021)

添加到收藏夹

Article Peripheral Vascular Disease

Innovations in the endovascular treatment of peripheral arterial disease

Joerg Tessarek et al.

Summary: The launch of effective tools for vascular treatment supports the dominating position of endovascular therapy in PAD treatment, while innovation in non-radiation image guidance helps reduce radiation exposure without compromising procedural quality. Furthermore, the available portfolio of endovascular tools allows for high-quality treatment of every vessel segment, potentially influencing PAD treatment in the coming years.

GEFASSCHIRURGIE (2021)

添加到收藏夹

Article Surgery

Three-Dimensional Holographic Guidance, Navigation, and Control (3D-GNC) for Endograft Positioning in Porcine Aorta: Feasibility Comparison With 2-Dimensional X-Ray Fluoroscopy

Karl West et al.

Summary: The holographic 3D-GNC system demonstrated improved accuracy of aortic stent-graft positioning with significant reductions in fluoroscopy time, contrast-dye administration, and procedure time.

JOURNAL OF ENDOVASCULAR THERAPY (2021)

添加到收藏夹

Article Surgery

First-in-Human Clinical Application of the Medyria TrackCath System in Endovascular Repair of Complex Aortic Aneurysms (ACCESS Trial): A Prospective Multicenter Single-Arm Clinical Trial

Nikolaos Floros et al.

Summary: The ACCESS Trial demonstrated the safety and effectiveness of the MedTCC catheter in complex endovascular procedures, reliably identifying and catheterizing target orifices. Through BFV measurement, it can reduce fluoroscopy time and contrast agent usage.

JOURNAL OF ENDOVASCULAR THERAPY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Retinal and choriocapillaris perfusion are associated with ankle-brachial-pressure-index and Fontaine stage in peripheral arterial disease

Maximilian W. M. Wintergerst et al.

Summary: This study found that both retinal and choroidal perfusion are significantly impaired in patients with PAD, as demonstrated by changes in vessel density and non-perfused areas. OCT-A parameters could serve as indirect imaging biomarkers for non-invasive PAD staging and monitoring.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Surgery

Digitalization in surgery What surgeons currently think and know about it-results of an online survey

D. Wilhelm et al.

CHIRURG (2020)

添加到收藏夹

Review Surgery

Artificial intelligence in abdominal aortic aneurysm

Juliette Raffort et al.

JOURNAL OF VASCULAR SURGERY (2020)

添加到收藏夹

Article Surgery

The Future of Vascular Medicine - Role of 3D Printing

Bernhard Dorweiler et al.

ZENTRALBLATT FUR CHIRURGIE (2020)

添加到收藏夹

Article Engineering, Biomedical

Three-dimensional guidance including shape sensing of a stentgraft system for endovascular aneurysm repair

Sonja Jaeckle et al.

INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Machine learning prediction in cardiovascular diseases: a meta-analysis

Chayakrit Krittanawong et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Surgery

The Application of Virtual Reality in Patient Education

Vivek C. Pandrangi et al.

ANNALS OF VASCULAR SURGERY (2019)

添加到收藏夹

Article Surgery

Holographically-Guided Endovascular Aneurysm Repair

Pawel Rynio et al.

JOURNAL OF ENDOVASCULAR THERAPY (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A CNN-based prototype method of unstructured surgical state perception and navigation for an endovascular surgery robot

Yan Zhao et al.

MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2019)

添加到收藏夹

Article Peripheral Vascular Disease

Future perspectives of digital visualization technologies in vascular surgery Augmented reality, virtual reality and 3D printing

B. Dorweiler et al.

GEFASSCHIRURGIE (2019)

添加到收藏夹

Article Peripheral Vascular Disease

Robotics: automated procedures in vascular medicine

M. Kleemann et al.

GEFASSCHIRURGIE (2019)

添加到收藏夹

Review Peripheral Vascular Disease

Trends in use of 3D printing in vascular surgery: a survey

Patrizia Marti et al.

INTERNATIONAL ANGIOLOGY (2019)

添加到收藏夹

Article Surgery

Procedural and perioperative results in patients treated with fenestrated endovascular aneurysm repair planned by automated software in a physician-sponsored investigational device exemption trial of physician-modified endografts

Benjamin W. Starnes et al.

JOURNAL OF VASCULAR SURGERY (2018)

添加到收藏夹

Article Engineering, Biomedical

Learning-based endovascular navigation through the use of non-rigid registration for collaborative robotic catheterization

Wenqiang Chi et al.

INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2018)

添加到收藏夹

Review Surgery

The Role of Three-Dimensional Printing in Contemporary Vascular and Endovascular Surgery: A Systematic Review

Chun Hei Adrian Tam et al.

ANNALS OF VASCULAR SURGERY (2018)

添加到收藏夹

Article Surgery

Robotics and augmented reality. Current state of development and future perspectives

H. Feussner et al.

CHIRURG (2018)

添加到收藏夹

Letter Cardiac & Cardiovascular Systems

Effectiveness of 3D printed models in obtaining informed consent to complex aortic surgery

Enrico M. Marone et al.

JOURNAL OF CARDIOVASCULAR SURGERY (2018)

添加到收藏夹

Review Surgery

The clinical use of 3D printing in surgery

Luigi Pugliese et al.

UPDATES IN SURGERY (2018)

添加到收藏夹

Article Cardiac & Cardiovascular Systems

Electromagnetically Navigated In Situ Fenestration of Aortic Stent Grafts: Pilot Animal Study of a Novel Fenestrated EVAR Approach

Tobias Penzkofer et al.

CARDIOVASCULAR AND INTERVENTIONAL RADIOLOGY (2018)

添加到收藏夹

Article Surgery

Robotic Arch Catheter Placement Reduces Cerebral Embolization During Thoracic Endovascular Aortic Repair (TEVAR)

A. H. Perera et al.

EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY (2017)

添加到收藏夹

Article Surgery

A simulator for training in endovascular aneurysm repair: The use of three dimensional printers

I. O. Torres et al.

EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY (2017)

添加到收藏夹

Article Cardiac & Cardiovascular Systems

Demonstration of the Safety and Feasibility of Robotically Assisted Percutaneous Coronary Intervention in Complex Coronary Lesions Results of the CORA-PCI Study (Complex Robotically Assisted Percutaneous Coronary Intervention)

Ehtisham Mahmud et al.

JACC-CARDIOVASCULAR INTERVENTIONS (2017)

添加到收藏夹

Article Engineering, Biomedical

CathROB: A Highly Compact and Versatile Remote Catheter Navigation System

Laura Cercenelli et al.

APPLIED BIONICS AND BIOMECHANICS (2017)

添加到收藏夹

Article Surgery

Ultrasound fusion imaging with real-time navigation for the surveillance after endovascular aortic aneurysm repair

Jin Hyun Joh et al.

ANNALS OF SURGICAL TREATMENT AND RESEARCH (2017)

添加到收藏夹

Article Engineering, Biomedical

Towards X-ray free endovascular interventions - using HoloLens for on-line holographic visualisation

Ivo Kuhlemann et al.

HEALTHCARE TECHNOLOGY LETTERS (2017)

添加到收藏夹

Article Oncology

Three-dimensional (3D) printed endovascular simulation models: a feasibility study

Sebastian Mafeld et al.

ANNALS OF TRANSLATIONAL MEDICINE (2017)

添加到收藏夹

Review Engineering, Biomedical

3D-printing techniques in a medical setting: a systematic literature review

Philip Tack et al.

BIOMEDICAL ENGINEERING ONLINE (2016)

添加到收藏夹

Review Surgery

Evidence for Endovascular Simulation Training: A Systematic Review

K. W. M. See et al.

EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY (2016)

添加到收藏夹

Review Cardiac & Cardiovascular Systems

Applications of 3D printing in cardiovascular diseases

Andreas A. Giannopoulos et al.

NATURE REVIEWS CARDIOLOGY (2016)

添加到收藏夹

Article Radiology, Nuclear Medicine & Medical Imaging

Using 3D printed models for planning and guidance during endovascular intervention: a technical advance

Michael W. Itagaki

DIAGNOSTIC AND INTERVENTIONAL RADIOLOGY (2015)

添加到收藏夹

Article Surgery

Feasibility and Safety of Renal and Visceral Target Vessel Cannulation Using Robotically Steerable Catheters During Complex Endovascular Aortic Procedures

Frederic Cochennec et al.

JOURNAL OF ENDOVASCULAR THERAPY (2015)

添加到收藏夹

Article Surgery

Custom fenestration templates for endovascular repair of juxtarenal aortic aneurysms

Daniel F. Leotta et al.

JOURNAL OF VASCULAR SURGERY (2015)

添加到收藏夹

Article Radiology, Nuclear Medicine & Medical Imaging

Using 3D printed models for planning and guidance during endovascular intervention: a technical advance

Michael W. Itagaki

DIAGNOSTIC AND INTERVENTIONAL RADIOLOGY (2015)

添加到收藏夹

Review Medicine, General & Internal

Virtual reality training for improving the skills needed for performing surgery of the ear, nose or throat

Patorn Piromchai et al.

COCHRANE DATABASE OF SYSTEMATIC REVIEWS (2015)

添加到收藏夹

Letter Surgery

Use of a 3D Printed Hollow Aortic Model to Assist EVAR Planning in a Case With Complex Neck Anatomy: Potential of 3D Printing to Improve Patient Outcome

Matthew D. Tam et al.

JOURNAL OF ENDOVASCULAR THERAPY (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.